[pkgsrc/trunk]: pkgsrc/net/dnsmasq dnsmasq: update to 2.80. add dnssec option...

[maya <maya%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/fb6e2283c4c7
branches:  trunk
changeset: 386695:fb6e2283c4c7
user:      maya <maya%pkgsrc.org@localhost>
date:      Sat Oct 27 07:57:10 2018 +0000

description:
dnsmasq: update to 2.80. add dnssec option (default disabled)
>From i3endek, thanks!

version 2.80
        Add support for RFC 4039 DHCP rapid commit. Thanks to Ashram Method
        for the initial patch and motivation.

        Alter the default for dnssec-check-unsigned. Versions of
        dnsmasq prior to 2.80 defaulted to not checking unsigned
        replies, and used --dnssec-check-unsigned to switch
        this on. Such configurations will continue to work as before,
        but those which used the default of no checking will need to be
        altered to explicitly select no checking. The new default is
        because switching off checking for unsigned replies is
        inherently dangerous. Not only does it open the possiblity of forged
        replies, but it allows everything to appear to be working even
        when the upstream namesevers do not support DNSSEC, and in this
        case no DNSSEC validation at all is occuring.

        Fix DHCP broken-ness when --no-ping AND --dhcp-sequential-ip
        are set. Thanks to Daniel Miess for help with this.

        Add a facilty to store DNS packets sent/recieved in a
        pcap-format file for later debugging. The file location
        is given by the --dumpfile option, and a bitmap controlling
        which packets should be dumped is given by the --dumpmask
        option.

        Handle the case of both standard and constructed dhcp-ranges on the
        same interface better. We don't now contruct a dhcp-range if there's
        already one specified. This allows the specified interface to
        have different parameters and avoids advertising the same
        prefix twice. Thanks to Luis Marsano for spotting this case.

        Allow zone transfer in authoritative mode if auth-peer is specified,
        even if auth-sec-servers is not. Thanks to Rapha?l Halimi for
        the suggestion.

        Fix bug which sometimes caused dnsmasq to wrongly return answers
        without DNSSEC RRs to queries with the do-bit set, but only when
        DNSSEC validation was not enabled.
        Thanks to Petr Men??k for spotting this.

        Fix missing fatal errors with some malformed options
        (server, local, address, rebind-domain-ok, ipset, alias).
        Thanks to Eugene Lozovoy for spotting the problem.

        Fix crash on startup with a --synth-domain which has no prefix.
        Introduced in 2.79. Thanks to Andreas Engel for the bug report.

        Fix missing EDNS0 section in some replies generated by local
        DNS configuration which confused systemd-resolvd. Thanks to
        Steve Dodd for characterising the problem.

        Add --dhcp-name-match config option.

        Add --caa-record config option.

        Implement --address=/example.com/# as (more efficient) syntactic
        sugar for --address=/example.com/0.0.0.0 and
        --address=/example.com/::
        Returning null addresses is a useful technique for ad-blocking.
        Thanks to Peter Russell for the suggestion.

        Change anti cache-snooping behaviour with queries with the
        recursion-desired bit unset. Instead to returning SERVFAIL, we
        now always forward, and never answer from the cache. This
        allows "dig +trace" command to work.

        Include in the example config file a formulation which
        stops DHCP clients from claiming the DNS name "wpad".
        This is a fix for the CERT Vulnerability VU#598349.

diffstat:

 net/dnsmasq/Makefile   |   4 ++--
 net/dnsmasq/distinfo   |  10 +++++-----
 net/dnsmasq/options.mk |  11 +++++++++--
 3 files changed, 16 insertions(+), 9 deletions(-)

diffs (52 lines):

diff -r 383ad7cd351b -r fb6e2283c4c7 net/dnsmasq/Makefile
--- a/net/dnsmasq/Makefile      Fri Oct 26 20:43:46 2018 +0000
+++ b/net/dnsmasq/Makefile      Sat Oct 27 07:57:10 2018 +0000
@@ -1,6 +1,6 @@
-# $NetBSD: Makefile,v 1.37 2018/03/23 12:58:43 adam Exp $
+# $NetBSD: Makefile,v 1.38 2018/10/27 07:57:10 maya Exp $
 
-DISTNAME=      dnsmasq-2.79
+DISTNAME=      dnsmasq-2.80
 CATEGORIES=    net
 MASTER_SITES=  http://www.thekelleys.org.uk/dnsmasq/
 EXTRACT_SUFX=  .tar.xz
diff -r 383ad7cd351b -r fb6e2283c4c7 net/dnsmasq/distinfo
--- a/net/dnsmasq/distinfo      Fri Oct 26 20:43:46 2018 +0000
+++ b/net/dnsmasq/distinfo      Sat Oct 27 07:57:10 2018 +0000
@@ -1,7 +1,7 @@
-$NetBSD: distinfo,v 1.35 2018/03/23 12:58:43 adam Exp $
+$NetBSD: distinfo,v 1.36 2018/10/27 07:57:10 maya Exp $
 
-SHA1 (dnsmasq-2.79.tar.xz) = d4a1af08b02b27736954ce8b2db2da7799d75812
-RMD160 (dnsmasq-2.79.tar.xz) = e4cb81b4a08b32c5253520ee146d5f40cd3ff7b3
-SHA512 (dnsmasq-2.79.tar.xz) = 2c06212696ab55e1584f6133872f5b196013509e4b1822d0457787b456e14341afdde887749e370a2e512124cb4138f012f4601b08690707be4acc7cf2f2876f
-Size (dnsmasq-2.79.tar.xz) = 493036 bytes
+SHA1 (dnsmasq-2.80.tar.xz) = 45317f3ce129c670c812428f97b92273b5286df0
+RMD160 (dnsmasq-2.80.tar.xz) = 5a26def1ae9a47a2debe08845dfc41d14f3bfa2e
+SHA512 (dnsmasq-2.80.tar.xz) = 58e56beb553fc41311e5dc16d8b0eb3b6801e2bdfbcd0e7a6659703f08960b6ad10d48b0b14a4d727636faf35483e01597cff2ae49e7fe9fa9e214f437b1c068
+Size (dnsmasq-2.80.tar.xz) = 501072 bytes
 SHA1 (patch-src_bpf.c) = 05dc64c016c608e6b963ce9ee80c28e872a88f9e
diff -r 383ad7cd351b -r fb6e2283c4c7 net/dnsmasq/options.mk
--- a/net/dnsmasq/options.mk    Fri Oct 26 20:43:46 2018 +0000
+++ b/net/dnsmasq/options.mk    Sat Oct 27 07:57:10 2018 +0000
@@ -1,7 +1,7 @@
-# $NetBSD: options.mk,v 1.4 2017/06/02 08:37:49 adam Exp $
+# $NetBSD: options.mk,v 1.5 2018/10/27 07:57:10 maya Exp $
 
 PKG_OPTIONS_VAR=       PKG_OPTIONS.dnsmasq
-PKG_SUPPORTED_OPTIONS= dbus inet6
+PKG_SUPPORTED_OPTIONS= dbus inet6 dnssec
 PKG_SUGGESTED_OPTIONS= inet6
 
 .include "../../mk/bsd.options.mk"
@@ -20,3 +20,10 @@
 .if empty(PKG_OPTIONS:Minet6)
 CFLAGS+=       -DNO_IPV6
 .endif
+
+.if !empty(PKG_OPTIONS:Mdnssec)
+USE_TOOLS+=    pkg-config
+CFLAGS+=       -DHAVE_DNSSEC
+.include "../../security/nettle/buildlink3.mk"
+.include "../../devel/gmp/buildlink3.mk"
+.endif