[pkgsrc/trunk]: pkgsrc/doc/guide/files doc/guide: remove outdated text from t...

[rillig <rillig%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/aa64bfe2fd15
branches:  trunk
changeset: 394991:aa64bfe2fd15
user:      rillig <rillig%pkgsrc.org@localhost>
date:      Sun Apr 28 11:16:07 2019 +0000

description:
doc/guide: remove outdated text from the Makefiles chapter

Most of the wording was based on the pkglint implementation from before
2015 and was too technical to be useful. Since 2015, bmake doesn't split
the .for arguments on simple whitespace but uses brk_string as well,
therefore that information was outdated.

diffstat:

 doc/guide/files/makefile.xml |  80 +++++++++++++------------------------------
 1 files changed, 25 insertions(+), 55 deletions(-)

diffs (141 lines):

diff -r a96007915261 -r aa64bfe2fd15 doc/guide/files/makefile.xml
--- a/doc/guide/files/makefile.xml      Sun Apr 28 11:09:06 2019 +0000
+++ b/doc/guide/files/makefile.xml      Sun Apr 28 11:16:07 2019 +0000
@@ -1,4 +1,4 @@
-<!-- $NetBSD: makefile.xml,v 1.29 2018/05/19 10:30:22 rillig Exp $ -->
+<!-- $NetBSD: makefile.xml,v 1.30 2019/04/28 11:16:07 rillig Exp $ -->
 
 <chapter id="makefile"> <?dbhtml filename="makefile.html"?>
   <title>Programming in <filename>Makefile</filename>s</title>
@@ -10,13 +10,13 @@
   understandable.</para>
 
   <para>The basic ingredients for <filename>Makefile</filename>
-  programming are variables (which are actually macros) and shell
+  programming are variables and shell
   commands. Among these shell commands may even be more complex ones
   like &man.awk.1; programs. To make sure that every shell command runs
   as intended it is necessary to quote all variables correctly when they
   are used.</para>
 
-  <para>This chapter describes some patterns, that appear quite often in
+  <para>This chapter describes some patterns that appear quite often in
   <filename>Makefile</filename>s, including the pitfalls that come along
   with them.</para>
 
@@ -51,7 +51,7 @@
     <para>You might remember that &man.make.1; sometimes removes
     <literal>${.TARGET}</literal> in case of error, but this only
     happens when it is interrupted, for example by pressing
-    <literal>^C</literal>. This does <emphasis>not</emphasis> happen
+    <literal>Ctrl+C</literal>. This does <emphasis>not</emphasis> happen
     when one of the commands fails (like &man.false.1; above).</para>
     
     </listitem>
@@ -62,59 +62,31 @@
     <title><filename>Makefile</filename> variables</title>
 
     <para><filename>Makefile</filename> variables contain strings that
-    can be processed using the five operators ``='', ``+='', ``?='',
-    ``:='', and ``!='', which are described in the &man.make.1; man
+    can be processed using the five operators <code>=</code>,
+    <code>+=</code>, <code>?=</code>, <code>:=</code> and
+    <code>!=</code>, which are described in the &man.make.1; man
     page.</para>
 
     <para>When a variable's value is parsed from a
-    <filename>Makefile</filename>, the hash character ``#'' and the
-    backslash character ``\'' are handled specially. If a backslash is
-    followed by a newline, any whitespace immediately in front of the
-    backslash, the backslash, the newline, and any whitespace
-    immediately behind the newline are replaced with a single space. A
-    backslash character and an immediately following hash character are
-    replaced with a single hash character. Otherwise, the backslash is
-    passed as is. In a variable assignment, any hash character that is
-    not preceded by a backslash starts a comment that continues up to the
-    end of the logical line.</para>
+    <filename>Makefile</filename>, the hash character <code>#</code> and
+    the backslash character <code>\</code> are handled specially. If a
+    backslash is the last character in a line, that backslash is removed
+    from the line and the line continues with the next line of the file.</para>
+
+    <para>The <code>#</code> character starts a comment that reaches
+    until the end of the line. To get an actual <code>#</code> character,
+    such as in a URL, write <code>\#</code> instead.</para>
 
     <para>The evaluation of variables either happens immediately or lazy.
-    It happens immediately when the variable occurs
-    on the right-hand side of the ``:='' or the ``!='' operator, in a
+    It happens immediately when the variable occurs on the right-hand
+    side of the <code>:=</code> or the <code>!=</code> operator, in a
     <varname>.if</varname> condition or a <varname>.for</varname> loop.
     In the other cases, it is evaluated lazily.</para>
 
     <para>Some of the modifiers split the string into words and then
-    operate on the words, others operate on the string as a whole. When
-    a string is split into words, it is split like in &man.sh.1;.</para>
-
-    <para>There are several types of variables that should be handled
-    differently. Strings and two types of lists.</para>
-
-    <itemizedlist>
-
-      <listitem><para><emphasis>Strings</emphasis> can contain arbitrary
-      characters. Nevertheless, you should restrict yourself to only
-      using printable characters. Examples are
-      <varname>PREFIX</varname> and
-      <varname>COMMENT</varname>.</para></listitem>
-
-      <listitem><para><emphasis>Internal lists</emphasis> are lists that
-      are never exported to any shell command. Their elements are
-      separated by whitespace. Therefore, the elements themselves cannot
-      have embedded whitespace. Any other characters are allowed.
-      Internal lists can be used in <command>.for</command> loops.
-      Examples are <varname>DEPENDS</varname> and
-      <varname>BUILD_DEPENDS</varname>.</para></listitem>
-
-      <listitem><para><emphasis>External lists</emphasis> are lists that
-      may be exported to a shell command. Their elements can contain any
-      characters, including whitespace. That's why they cannot be used
-      in <command>.for</command> loops. Examples are
-      <varname>DISTFILES</varname> and
-      <varname>MASTER_SITES</varname>.</para></listitem>
-
-    </itemizedlist>
+    operate on the words, others operate on the string as a whole. When a
+    string is split into words, double quotes and single quotes are
+    interpreted as delimiters, just like in &man.sh.1;.</para>
 
     <sect2 id="makefile.variables.names">
       <title>Naming conventions</title>
@@ -123,15 +95,14 @@
 
        <listitem><para>All variable names starting with an underscore
        are reserved for use by the pkgsrc infrastructure. They shall
-       not be used by package
-       <filename>Makefile</filename>s.</para></listitem>
+       not be used by packages.</para></listitem>
 
        <listitem><para>In <command>.for</command> loops you should use
        lowercase variable names for the iteration
        variables.</para></listitem>
 
-       <listitem><para>All list variables should have a ``plural''
-       name, e.g. <varname>PKG_OPTIONS</varname> or
+       <listitem><para>All list variables should have a plural name,
+       such as <varname>PKG_OPTIONS</varname> or
        <varname>DISTFILES</varname>.</para></listitem>
 
       </itemizedlist>
@@ -279,9 +250,8 @@
 .endfor
 </programlisting>
 
-<para>This variant only works when <varname>EGFILES</varname> does not
-contain filenames with spaces, since the <code>.for</code> loop splits on
-simple whitespace.</para>
+<para>If one of the filenames contains special characters, it should be
+enclosed in single or double quotes.</para>
 
 <para>To have a shell command test whether a make variable is empty, use
 the following code: <code>${TEST} -z ${POSSIBLY_EMPTY:Q}""</code>.</para>