pkgsrc-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[pkgsrc/trunk]: pkgsrc/net/wpa_gui wpa_gui: update to v2.6



details:   https://anonhg.NetBSD.org/pkgsrc/rev/62904959c58d
branches:  trunk
changeset: 354972:62904959c58d
user:      maya <maya%pkgsrc.org@localhost>
date:      Wed Nov 16 15:57:29 2016 +0000

description:
wpa_gui: update to v2.6

ChangeLog for wpa_supplicant (and also _gui):

2016-10-02 - v2.6
        * fixed WNM Sleep Mode processing when PMF is not enabled
          [http://w1.fi/security/2015-6/] (CVE-2015-5310)
        * fixed EAP-pwd last fragment validation
          [http://w1.fi/security/2015-7/] (CVE-2015-5315)
        * fixed EAP-pwd unexpected Confirm message processing
          [http://w1.fi/security/2015-8/] (CVE-2015-5316)
        * fixed WPS configuration update vulnerability with malformed passphrase
          [http://w1.fi/security/2016-1/] (CVE-2016-4476)
        * fixed configuration update vulnerability with malformed parameters set
          over the local control interface
          [http://w1.fi/security/2016-1/] (CVE-2016-4477)
        * fixed TK configuration to the driver in EAPOL-Key 3/4 retry case
        * extended channel switch support for P2P GO
        * started to throttle control interface event message bursts to avoid
          issues with monitor sockets running out of buffer space
        * mesh mode fixes/improvements
          - generate proper AID for peer
          - enable WMM by default
          - add VHT support
          - fix PMKID derivation
          - improve robustness on various exchanges
          - fix peer link counting in reconnect case
          - improve mesh joining behavior
          - allow DTIM period to be configured
          - allow HT to be disabled (disable_ht=1)
          - add MESH_PEER_ADD and MESH_PEER_REMOVE commands
          - add support for PMKSA caching
          - add minimal support for SAE group negotiation
          - allow pairwise/group cipher to be configured in the network profile
          - use ieee80211w profile parameter to enable/disable PMF and derive
            a separate TX IGTK if PMF is enabled instead of using MGTK
            incorrectly
          - fix AEK and MTK derivation
          - remove GTKdata and IGTKdata from Mesh Peering Confirm/Close
          - note: these changes are not fully backwards compatible for secure
            (RSN) mesh network
        * fixed PMKID derivation with SAE
        * added support for requesting and fetching arbitrary ANQP-elements
          without internal support in wpa_supplicant for the specific element
          (anqp[265]=<hexdump> in "BSS <BSSID>" command output)
        * P2P
          - filter control characters in group client device names to be
            consistent with other P2P peer cases
          - support VHT 80+80 MHz and 160 MHz
          - indicate group completion in P2P Client role after data association
            instead of already after the WPS provisioning step
          - improve group-join operation to use SSID, if known, to filter BSS
            entries
          - added optional ssid=<hexdump> argument to P2P_CONNECT for join case
          - added P2P_GROUP_MEMBER command to fetch client interface address
        * P2PS
          - fix follow-on PD Response behavior
          - fix PD Response generation for unknown peer
          - fix persistent group reporting
          - add channel policy to PD Request
          - add group SSID to the P2PS-PROV-DONE event
          - allow "P2P_CONNECT <addr> p2ps" to be used without specifying the
            default PIN
        * BoringSSL
          - support for OCSP stapling
          - support building of h20-osu-client
        * D-Bus
          - add ExpectDisconnect()
          - add global config parameters as properties
          - add SaveConfig()
          - add VendorElemAdd(), VendorElemGet(), VendorElemRem()
        * fixed Suite B 192-bit AKM to use proper PMK length
          (note: this makes old releases incompatible with the fixed behavior)
        * improved PMF behavior for cases where the AP and STA has different
          configuration by not trying to connect in some corner cases where the
          connection cannot succeed
        * added option to reopen debug log (e.g., to rotate the file) upon
          receipt of SIGHUP signal
        * EAP-pwd: added support for Brainpool Elliptic Curves
          (with OpenSSL 1.0.2 and newer)
        * fixed EAPOL reauthentication after FT protocol run
        * fixed FTIE generation for 4-way handshake after FT protocol run
        * extended INTERFACE_ADD command to allow certain type (sta/ap)
          interface to be created
        * fixed and improved various FST operations
        * added 80+80 MHz and 160 MHz VHT support for IBSS/mesh
        * fixed SIGNAL_POLL in IBSS and mesh cases
        * added an option to abort an ongoing scan (used to speed up connection
          and can also be done with the new ABORT_SCAN command)
        * TLS client
          - do not verify CA certificates when ca_cert is not specified
          - support validating server certificate hash
          - support SHA384 and SHA512 hashes
          - add signature_algorithms extension into ClientHello
          - support TLS v1.2 signature algorithm with SHA384 and SHA512
          - support server certificate probing
          - allow specific TLS versions to be disabled with phase2 parameter
          - support extKeyUsage
          - support PKCS #5 v2.0 PBES2
          - support PKCS #5 with PKCS #12 style key decryption
          - minimal support for PKCS #12
          - support OCSP stapling (including ocsp_multi)
        * OpenSSL
          - support OpenSSL 1.1 API changes
          - drop support for OpenSSL 0.9.8
          - drop support for OpenSSL 1.0.0
        * added support for multiple schedule scan plans (sched_scan_plans)
        * added support for external server certificate chain validation
          (tls_ext_cert_check=1 in the network profile phase1 parameter)
        * made phase2 parser more strict about correct use of auth=<val> and
          autheap=<val> values
        * improved GAS offchannel operations with comeback request
        * added SIGNAL_MONITOR command to request signal strength monitoring
          events
        * added command for retrieving HS 2.0 icons with in-memory storage
          (REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and
          RX-HS20-ICON event)
        * enabled ACS support for AP mode operations with wpa_supplicant
        * EAP-PEAP: fixed interoperability issue with Windows 2012r2 server
          ("Invalid Compound_MAC in cryptobinding TLV")
        * EAP-TTLS: fixed success after fragmented final Phase 2 message
        * VHT: added interoperability workaround for 80+80 and 160 MHz channels
        * WNM: workaround for broken AP operating class behavior
        * added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE)
        * nl80211:
          - add support for full station state operations
          - do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled
          - add NL80211_ATTR_PREV_BSSID with Connect command
          - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use
            unencrypted EAPOL frames
        * added initial MBO support; number of extensions to WNM BSS Transition
          Management
        * added support for PBSS/PCP and P2P on 60 GHz
        * Interworking: add credential realm to EAP-TLS identity
        * fixed EAPOL-Key Request Secure bit to be 1 if PTK is set
        * HS 2.0: add support for configuring frame filters
        * added POLL_STA command to check connectivity in AP mode
        * added initial functionality for location related operations
        * started to ignore pmf=1/2 parameter for non-RSN networks
        * added wps_disabled=1 network profile parameter to allow AP mode to
          be started without enabling WPS
        * wpa_cli: added action script support for AP-ENABLED and AP-DISABLED
          events
        * improved Public Action frame addressing
          - add gas_address3 configuration parameter to control Address 3
            behavior
        * number of small fixes

diffstat:

 net/wpa_gui/Makefile |   5 ++---
 net/wpa_gui/distinfo |  10 +++++-----
 2 files changed, 7 insertions(+), 8 deletions(-)

diffs (30 lines):

diff -r a7ad402511a5 -r 62904959c58d net/wpa_gui/Makefile
--- a/net/wpa_gui/Makefile      Wed Nov 16 15:29:48 2016 +0000
+++ b/net/wpa_gui/Makefile      Wed Nov 16 15:57:29 2016 +0000
@@ -1,8 +1,7 @@
-# $NetBSD: Makefile,v 1.27 2016/10/28 06:24:35 abs Exp $
+# $NetBSD: Makefile,v 1.28 2016/11/16 15:57:29 maya Exp $
 
-DISTNAME=      wpa_supplicant-2.5
+DISTNAME=      wpa_supplicant-2.6
 PKGNAME=       ${DISTNAME:S/supplicant/gui/}
-PKGREVISION=   1
 CATEGORIES=    net
 MASTER_SITES=  http://hostap.epitest.fi/releases/
 
diff -r a7ad402511a5 -r 62904959c58d net/wpa_gui/distinfo
--- a/net/wpa_gui/distinfo      Wed Nov 16 15:29:48 2016 +0000
+++ b/net/wpa_gui/distinfo      Wed Nov 16 15:57:29 2016 +0000
@@ -1,7 +1,7 @@
-$NetBSD: distinfo,v 1.7 2016/08/17 21:46:45 maya Exp $
+$NetBSD: distinfo,v 1.8 2016/11/16 15:57:29 maya Exp $
 
-SHA1 (wpa_supplicant-2.5.tar.gz) = f82281c719d2536ec4783d9442c42ff956aa39ed
-RMD160 (wpa_supplicant-2.5.tar.gz) = 07bf2b9646b0d7dec3e3507e9ef04e71784c359f
-SHA512 (wpa_supplicant-2.5.tar.gz) = e3ca36ed10b4dae8f663e98ad230c8c059c952316c21a6b0638ecb1b40a5ef1b9083138ab45207cb764a17e870b4bd0625dd6efdb65856cb4dca13ccc0559e81
-Size (wpa_supplicant-2.5.tar.gz) = 2607336 bytes
+SHA1 (wpa_supplicant-2.6.tar.gz) = 8189704e257c3e9f8300c49dc6e49a381b1d6299
+RMD160 (wpa_supplicant-2.6.tar.gz) = 2fb26394d22ac3acde2d9d7c6543af8eaac9c55a
+SHA512 (wpa_supplicant-2.6.tar.gz) = 46442cddb6ca043b8b08d143908f149954c238e0f3a57a0df73ca4fab9c1acd91b078f3f26375a1d99cd1d65625986328018c735d8705882c8f91e389cad28a6
+Size (wpa_supplicant-2.6.tar.gz) = 2753524 bytes
 SHA1 (patch-wpa__supplicant_Makefile) = e6b9853800637d9539e27d2d75f7520fe2e61dca



Home | Main Index | Thread Index | Old Index