[pkgsrc/trunk]: pkgsrc/sysutils/acpica-utils acpica-utils: update to 20160930

[maya <maya%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/7746a789865a
branches:  trunk
changeset: 353807:7746a789865a
user:      maya <maya%pkgsrc.org@localhost>
date:      Fri Oct 14 10:31:12 2016 +0000

description:
acpica-utils: update to 20160930

----------------------------------------
30 September 2016. Summary of changes for version 20160930:


1) ACPICA kernel-resident subsystem:

Fixed a regression in the internal AcpiTbFindTable function where a non
AE_OK exception could inadvertently be returned even if the function did
not fail. This problem affects the following operators:
    DataTableRegion
    LoadTable

Fixed a regression in the LoadTable operator where a load to any
namespace location other than the root no longer worked properly.

Increased the maximum loop count value that will result in the
AE_AML_INFINITE_LOOP exception. This is a mechanism that is intended to
prevent infinite loops within the AML interpreter and thus the host OS
kernel. The value is increased from 0xFFFF to 0xFFFFF loops (65,535 to
1,048,575).

Moved the AcpiGbl_MaxLoopIterations configuration variable to the public
acpixf.h file. This allows hosts to easily configure the maximum loop
count at runtime.

Removed an illegal character in the strtoul64.c file. This character
caused errors with some C compilers.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 140.4K Code, 58.1K Data, 198.5K Total
    Debug Version:     200.7K Code, 82.1K Data, 282.8K Total
  Previous Release:
    Non-Debug Version: 140.0K Code, 58.1K Data, 198.1K Total
    Debug Version:     200.3K Code, 82.1K Data, 282.4K Total


2) iASL Compiler/Disassembler and Tools:

Disassembler: Fixed a problem with the conversion of Else{If{ blocks into
the simpler ASL ElseIf keyword. During the conversion, a trailing If
block could be lost and missing from the disassembled output.

iASL: Fixed a missing parser rule for the ObjectType operator. For ASL+,
the missing rule caused a parse error when using the Index operator as an
operand to ObjectType. This construct now compiles properly. Example:
    ObjectType(PKG1[4]).

iASL: Correctly handle unresolved symbols in the hardware map file (-lm
option). Previously, unresolved symbols could cause a protection fault.
Such symbols are now marked as unresolved in the map file.

iASL: Implemented support to allow control method invocations as an
operand to the ASL DeRefOf operator. Example:
    DeRefOf(MTH1(Local0))

Disassembler: Improved support for the ToPLD ASL macro. Detection of a
possible _PLD buffer now includes examination of both the normal buffer
length (16 or 20) as well as the surrounding AML package length.

Disassembler: Fixed a problem with the decoding of complex expressions
within the Divide operator for ASL+. For the case where both the quotient
and remainder targets are specified, the entire statement cannot be
disassembled. Previously, the output incorrectly contained a mix of ASL-
and ASL+ operators. This mixed statement causes a syntax error when
compiled. Example:
    Divide (Add (INT1, 6), 128, RSLT, QUOT)  // was incorrectly
disassembled to:
    Divide (INT1 + 6, 128, RSLT, QUOT)

iASL/Tools: Added support to process AML and non-AML ACPI tables
consistently. For the disassembler and AcpiExec, allow all types of ACPI
tables (AML and data tables). For the iASL -e option, allow only AML
tables (DSDT/SSDT).

----------------------------------------
31 August 2016. Summary of changes for version 20160831:


1) ACPICA kernel-resident subsystem:

Improve support for the so-called "module-level code", which is defined
to be math, logical and control AML opcodes that appear outside of any
control method. This change improves the support by adding more opcodes
that can be executed in the manner. Some other issues have been solved,
and the ASL grammar changes to support such code under all scope
operators (Device, etc.) are complete. Lv Zheng.

UEFI support: these OSL functions have been implemented. This is an
additional step toward supporting the AcpiExec utility natively (with
full hardware access) under UEFI. Marcelo Ferreira.
    AcpiOsReadPciConfiguration
    AcpiOsWritePciConfiguration

Fixed a possible mutex error during control method auto-serialization. Lv
Zheng.

Updated support for the Generic Address Structure by fully implementing
all GAS fields when a 32-bit address is expanded to a 64-bit GAS. Lv
Zheng.

Updated the return value for the internal _OSI method. Instead of
0xFFFFFFFF, the "Ones" value is now returned, which is 0xFFFFFFFFFFFFFFFF
for 64-bit ACPI tables. This fixes an incompatibility with other ACPI
implementations, and will be reflected and clarified in the next version
of the ACPI specification.

Implemented two new table events that can be passed to an ACPICA table
handler. These events are used to indicate a table installation or
uninstallation. These events are used in addition to existed table load
and unload events. Lv Zheng.

Implemented a cleanup for all internal string-to-integer conversions.
Consolidate multiple versions of this functionality and limit possible
bases to either 10 or 16 to simplify the code. Adds a new file,
utstrtoul64.

Cleanup the inclusion order of the various compiler-specific headers.
This simplifies build configuration management. The compiler-specific
headers are now split out from the host-specific headers. Lv Zheng.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 140.1K Code, 58.1K Data, 198.1K Total
    Debug Version:     200.3K Code, 82.1K Data, 282.4K Total


2) iASL Compiler/Disassembler and Tools:

iASL/AcpiExec: Added a command line option to display the build date/time
of the tool (-vd). This can be useful to verify that the correct version
of the tools are being used.

AML Debugger: Implemented a new subcommand ("execute predef") to execute
all predefined control methods and names within the current namespace.
This can be useful for debugging problems with ACPI tables and the ACPI
namespace.

----------------------------------------
29 July 2016. Summary of changes for version 20160729:


1) ACPICA kernel-resident subsystem:

Implemented basic UEFI support for the various ACPICA tools. This
includes:
1) An OSL to implement the various AcpiOs* interfaces on UEFI.
2) Support to obtain the ACPI tables on UEFI.
3) Local implementation of required C library functions not available on
UEFI.
4) A front-end (main) function for the tools for UEFI-related
initialization.

The initial deployment of this support is the AcpiDump utility executing
as an UEFI application via EDK2 (EDKII, "UEFI Firmware Development Kit").
Current environments supported are Linux/Unix. MSVC generation is not
supported at this time. See the generate/efi/README file for build
instructions. Lv Zheng.

Future plans include porting the AcpiExec utility to execute natively on
the platform with I/O and memory access. This will allow viewing/dump of
the platform namespace and native execution of ACPI control methods that
access the actual hardware. To fully implement this support, the OSL
functions below must be implemented with UEFI interfaces. Any community
help in the implementation of these functions would be appreciated:
    AcpiOsReadPort
    AcpiOsWritePort
    AcpiOsReadMemory
    AcpiOsWriteMemory
    AcpiOsReadPciConfiguration
    AcpiOsWritePciConfiguration

Restructured and standardized the C library configuration for ACPICA,
resulting in the various configuration options below. This includes a
global restructuring of the compiler-dependent and platform-dependent
include files. These changes may affect the existing platform-dependent
configuration files on some hosts. Lv Zheng.

The current C library configuration options appear below. For any issues,
it may be helpful to examine the existing compiler-dependent and
platform-dependent files as examples. Lv Zheng.

1) Linux kernel:
    ACPI_USE_STANDARD_HEADERS=n in order not to use system-provided C
library.
    ACPI_USE_SYSTEM_CLIBRARY=y in order not to use ACPICA mini C library.
2) Unix/Windows/BSD applications:
    ACPI_USE_STANDARD_HEADERS=y in order to use system-provided C
library.
    ACPI_USE_SYSTEM_CLIBRARY=y in order not to use ACPICA mini C library.
3) UEFI applications:
    ACPI_USE_STANDARD_HEADERS=n in order not to use system-provided C
library.
    ACPI_USE_SYSTEM_CLIBRARY=n in order to use ACPICA mini C library.
4) UEFI applications (EDK2/StdLib):
    ACPI_USE_STANDARD_HEADERS=y in order to use EDK2 StdLib C library.
    ACPI_USE_SYSTEM_CLIBRARY=y in order to use EDK2 StdLib C library.


AML interpreter: "module-level code" support. Allows for execution of so-
called "executable" AML code (math/logical operations, etc.) outside of
control methods not just at the module level (top level) but also within
any scope declared outside of a control method - Scope{}, Device{},
Processor{}, PowerResource{}, and ThermalZone{}. Lv Zheng.

Simplified the configuration of the "maximum AML loops" global option by
adding a global public variable, "AcpiGbl_MaxLoopIterations" which can be
modified at runtime.


Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 139.1K Code, 22.9K Data, 162.0K Total
    Debug Version:     199.0K Code, 81.8K Data, 280.8K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Add full support for the RASF ACPI table (RAS Features Table).
Includes disassembler, data table compiler, and header support.

iASL Expand "module-level code" support. Allows for
compilation/disassembly of so-called "executable" AML code (math/logical
operations, etc.) outside of control methods not just at the module level
(top level) but also within any scope declared outside of a control
method - Scope{}, Device{}, Processor{}, PowerResource{}, and
ThermalZone{}.

AcpiDump: Added support for dumping all SSDTs on newer versions of
Windows. These tables are now easily available -- SSDTs are not available
through the registry on older versions.

----------------------------------------
27 May 2016. Summary of changes for version 20160527:


1) ACPICA kernel-resident subsystem:

Temporarily reverted the new arbitrary bit length/alignment support in
AcpiHwRead/AcpiHwWrite for the Generic Address Structure. There have been
a number of regressions with the new code that need to be fully resolved
and tested before this support can be finally integrated into ACPICA.
Apologies for any inconveniences these issues may have caused.

The ACPI message macros are not configurable (ACPI_MSG_ERROR,
ACPI_MSG_EXCEPTION, ACPI_MSG_WARNING, ACPI_MSG_INFO, ACPI_MSG_BIOS_ERROR,
and ACPI_MSG_BIOS_WARNING). Lv Zheng.

Fixed a couple of GCC warnings associated with the use of the -Wcast-qual
option. Adds a new return macro, return_STR. Junk-uk Kim.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 136.8K Code, 51.6K Data, 188.4K Total
    Debug Version:     201.5K Code, 82.2K Data, 283.7K Total
  Previous Release:
    Non-Debug Version: 137.4K Code, 52.6K Data, 190.0K Total
    Debug Version:     200.9K Code, 82.2K Data, 283.1K Total

----------------------------------------
22 April 2016. Summary of changes for version 20160422:

1) ACPICA kernel-resident subsystem:

Fixed a regression in the GAS (generic address structure) arbitrary bit
support in AcpiHwRead/AcpiHwWrite. Problem could cause incorrect behavior
and incorrect return values. Lv Zheng. ACPICA BZ 1270.

ACPI 6.0: Added support for new/renamed resource macros. One new argument
was added to each of these macros, and the original name has been
deprecated. The AML disassembler will always disassemble to the new
names. Support for the new macros was added to iASL, disassembler,
resource manager, and the acpihelp utility. ACPICA BZ 1274.

    I2cSerialBus  -> I2cSerialBusV2
    SpiSerialBus  -> SpiSerialBusV2
    UartSerialBus -> UartSerialBusV2

ACPI 6.0: Added support for a new integer field that was appended to the
package object returned by the _BIX method. This adds iASL compile-time
and AML runtime error checking. ACPICA BZ 1273.

ACPI 6.1: Added support for a new PCCT subtable, "HW-Reduced Comm
Subspace Type2" (Headers, Disassembler, and data table compiler).

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 137.4K Code, 52.6K Data, 190.0K Total
    Debug Version:     201.5K Code, 82.2K Data, 283.7K Total
  Previous Release:
    Non-Debug Version: 137.1K Code, 51.5K Data, 188.6K Total
    Debug Version:     201.0K Code, 82.0K Data, 283.0K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented an ASL grammar extension to allow/enable executable
"module-level code" to be created and executed under the various
operators that create new scopes. This type of AML code is already
supported in all known AML interpreters, and the grammar change will
appear in the next version of the ACPI specification. Simplifies the
conditional runtime creation of named objects under these object types:

    Device
    PowerResource
    Processor
    Scope
    ThermalZone

iASL: Implemented a new ASL extension, a "For" loop macro to add greater
ease-of-use to the ASL language. The syntax is similar to the
corresponding C operator, and is implemented with the existing AML While
opcode -- thus requiring no changes to existing AML interpreters.

    For (Initialize, Predicate, Update) {TermList}

Grammar:
    ForTerm :=
        For (
            Initializer    // Nothing | TermArg => ComputationalData
            Predicate      // Nothing | TermArg => ComputationalData
            Update         // Nothing | TermArg => ComputationalData
        ) {TermList}


iASL: The _HID/_ADR detection and validation has been enhanced to search
under conditionals in order to allow these objects to be conditionally
created at runtime.

iASL: Fixed several issues with the constant folding feature. The
improvement allows better detection and resolution of statements that can
be folded at compile time. ACPICA BZ 1266.

iASL/Disassembler: Fixed a couple issues with the Else{If{}...}
conversion to the ASL ElseIf operator where incorrect ASL code could be
generated.

iASL/Disassembler: Fixed a problem with the ASL+ code disassembly where
sometimes an extra (and extraneous) set of parentheses were emitted for
some combinations of operators. Although this did not cause any problems
with recompilation of the disassembled code, it made the code more
difficult to read. David Box. ACPICA BZ 1231.

iASL: Changed to ignore the unreferenced detection for predefined names
of resource descriptor elements, when the resource descriptor is
created/defined within a control method.

iASL: Disassembler: Fix a possible fault with externally declared Buffer
objects.

----------------------------------------
18 March 2016. Summary of changes for version 20160318:

1) ACPICA kernel-resident subsystem:

Added support for arbitrary bit lengths and bit offsets for registers
defined by the Generic Address Structure. Previously, only aligned bit
lengths of 8/16/32/64 were supported. This was sufficient for many years,
but recently some machines have been seen that require arbitrary bit-
level support. ACPICA BZ 1240. Lv Zheng.

Fixed an issue where the \_SB._INI method sometimes must be evaluated
before any _REG methods are evaluated. Lv Zheng.

Implemented several changes related to ACPI table support
(Headers/Disassembler/TableCompiler):
NFIT: For ACPI 6.1, updated to add some additional new fields and
constants.
FADT: Updated a warning message and set compliance to ACPI 6.1 (Version
6).
DMAR: Added new constants per the 10/2014 DMAR spec.
IORT: Added new subtable per the 10/2015 IORT spec.
HEST: For ACPI 6.1, added new constants and new subtable.
DBG2: Added new constants per the 12/2015 DBG2 spec.
FPDT: Fixed several incorrect fields, add the FPDT boot record structure.
ACPICA BZ 1249.
ERST/EINJ: Updated disassembler with new "Execute Timings" actions.

Updated header support for the DMAR table to match the current version of
the related spec.

Added extensions to the ASL Concatenate operator to allow any ACPI object
to be passed as an operand. Any object other than Integer/String/Buffer
simply returns a string containing the object type. This extends the
usefulness of the Printf macros. Previously, Concatenate would abort the
control method if a non-data object was encountered.

ACPICA source code: Deployed the C "const" keyword across the source code
where appropriate. ACPICA BZ 732. Joerg Sonnenberger (NetBSD).

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 137.1K Code, 51.5K Data, 188.6K Total
    Debug Version:     201.0K Code, 82.0K Data, 283.0K Total
  Previous Release:
    Non-Debug Version: 136.2K Code, 51.5K Data, 187.7K Total
    Debug Version:     200.4K Code, 82.0K Data, 282.4K Total


2) iASL Compiler/Disassembler and Tools:

iASL/Disassembler: Improved the heuristic used to determine the number of
arguments for an externally defined control method (a method in another
table). Although this is an improvement, there is no deterministic way to
"guess" the number of method arguments. Only the ACPI 6.0 External opcode
will completely solve this problem as it is deployed (automatically) in
newer BIOS code.

iASL/Disassembler: Fixed an ordering issue for emitted External() ASL
statements that could cause errors when the disassembled file is
compiled. ACPICA BZ 1243. David Box.

iASL: Fixed a regression caused by the merger of the two versions of the
local strtoul64. Because of a dependency on a global variable, strtoul64
could return an error for integers greater than a 32-bit value. ACPICA BZ
1260.

iASL: Fixed a regression where a fault could occur for an ASL Return
statement if it invokes a control method that is not resolved. ACPICA BZ
1264.

AcpiXtract: Improved input file validation: detection of binary files and
non-acpidump text files.

----------------------------------------
12 February 2016. Summary of changes for version 20160212:

1) ACPICA kernel-resident subsystem:

Implemented full support for the ACPI 6.1 specification (released in
January). This version of the specification is available at:
http://www.uefi.org/specifications

Only a relatively small number of changes were required in ACPICA to
support ACPI 6.1, in these areas:
- New predefined names
- New _HID values
- A new subtable for HEST
- A few other header changes for new values

Ensure \_SB_._INI is executed before any _REG methods are executed. There
appears to be existing BIOS code that relies on this behavior. Lv Zheng.

Reverted a change made in version 20151218 which enabled method
invocations to be targets of various ASL operators (SuperName and Target
grammar elements). While the new behavior is supported by the ACPI
specification, other AML interpreters do not support this behavior and
never will. The ACPI specification will be updated for ACPI 6.2 to remove
this support. Therefore, the change was reverted to the original ACPICA
behavior.

ACPICA now supports the GCC 6 compiler.

Current Release: (Note: build changes increased sizes)
    Non-Debug Version: 136.2K Code, 51.5K Data, 187.7K Total
    Debug Version:     200.4K Code, 82.0K Data, 282.4K Total
Previous Release:
    Non-Debug Version: 102.7K Code, 28.4K Data, 131.1K Total
    Debug Version:     200.4K Code, 81.9K Data, 282.3K Total


2) iASL Compiler/Disassembler and Tools:

Completed full support for the ACPI 6.0 External() AML opcode. The
compiler emits an external AML opcode for each ASL External statement.
This opcode is used by the disassembler to assist with the disassembly of
external control methods by specifying the required number of arguments
for the method. AML interpreters do not use this opcode. To ensure that
interpreters do not even see the opcode, a block of one or more external
opcodes is surrounded by an "If(0)" construct. As this feature becomes
commonly deployed in BIOS code, the ability of disassemblers to correctly
disassemble AML code will be greatly improved. David Box.

iASL: Implemented support for an optional cross-reference output file.
The -lx option will create a the cross-reference file with the suffix
"xrf". Three different types of cross-reference are created in this file:
- List of object references made from within each control method
- Invocation (caller) list for each user-defined control method
- List of references to each non-method object in the namespace

iASL: Method invocations as ASL Target operands are now disallowed and
flagged as errors in preparation for ACPI 6.2 (see the description of the
problem above).

----------------------------------------
8 January 2016. Summary of changes for version 20160108:

1) ACPICA kernel-resident subsystem:

Updated all ACPICA copyrights and signons to 2016: Added the 2016
copyright to all source code module headers and utility/tool signons.
This includes the standard Linux dual-license header. This affects
virtually every file in the ACPICA core subsystem, iASL compiler, all
ACPICA utilities, and the ACPICA test suite.

Fixed a regression introduced in version 20151218 concerning the
execution of so-called module-level ASL/AML code. Namespace objects
created under a module-level If() construct were not properly/fully
entered into the namespace and could cause an interpreter fault when
accessed.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
    Non-Debug Version: 102.7K Code, 28.4K Data, 131.1K Total
    Debug Version:     200.4K Code, 81.9K Data, 282.4K Total
  Previous Release:
    Non-Debug Version: 102.6K Code, 28.4K Data, 131.0K Total
    Debug Version:     200.3K Code, 81.9K Data, 282.3K Total


2) iASL Compiler/Disassembler and Tools:

Fixed a problem with the compilation of the GpioIo and GpioInt resource
descriptors. The _PIN field name was incorrectly defined to be an array
of 32-bit values, but the _PIN values are in fact 16 bits each. This
would cause incorrect bit width warnings when using Word (16-bit) fields
to access the descriptors.


----------------------------------------
18 December 2015. Summary of changes for version 20151218:

1) ACPICA kernel-resident subsystem:

Implemented per-AML-table execution of "module-level code" as individual
ACPI tables are loaded into the namespace during ACPICA initialization.
In other words, any module-level code within an AML table is executed
immediately after the table is loaded, instead of batched and executed
after all of the tables have been loaded. This provides compatibility
with other ACPI implementations. ACPICA BZ 1219. Bob Moore, Lv Zheng,
David Box.

To fully support the feature above, the default operation region handlers
for the SystemMemory, SystemIO, and PCI_Config address spaces are now
installed before any ACPI tables are loaded. This enables module-level
code to access these address spaces during the table load and module-
level code execution phase. ACPICA BZ 1220. Bob Moore, Lv Zheng, David
Box.

Implemented several changes to the internal _REG support in conjunction
with the changes above. Also, changes to the AcpiExec/AcpiNames/Examples
utilities for the changes above. Although these tools were changed, host
operating systems that simply use the default handlers for SystemMemory,
SystemIO, and PCI_Config spaces should not require any update. Lv Zheng.

For example, in the code below, DEV1 is conditionally added to the
namespace by the DSDT via module-level code that accesses an operation
region. The SSDT references DEV1 via the Scope operator. DEV1 must be
created immediately after the DSDT is loaded in order for the SSDT to
successfully reference DEV1. Previously, this code would cause an
AE_NOT_EXIST exception during the load of the SSDT. Now, this code is
fully supported by ACPICA.

    DefinitionBlock ("", "DSDT", 2, "Intel", "DSDT1", 1)
    {
        OperationRegion (OPR1, SystemMemory, 0x400, 32)
        Field (OPR1, AnyAcc, NoLock, Preserve)
        {
            FLD1, 1
        }
        If (FLD1)
        {
            Device (\DEV1)
            {
            }
        }
    }
    DefinitionBlock ("", "SSDT", 2, "Intel", "SSDT1", 1)
    {
        External (\DEV1, DeviceObj)
        Scope (\DEV1)
        {
        }
    }

Fixed an AML interpreter problem where control method invocations were
not handled correctly when the invocation was itself a SuperName argument
to another ASL operator. In these cases, the method was not invoked.
ACPICA BZ 1002. Affects the following ASL operators that have a SuperName
argument:
    Store
    Acquire, Wait
    CondRefOf, RefOf
    Decrement, Increment
    Load, Unload
    Notify
    Signal, Release, Reset
    SizeOf

Implemented automatic String-to-ObjectReference conversion support for
packages returned by predefined names (such as _DEP). A common BIOS error
is to add double quotes around an ObjectReference namepath, which turns
the reference into an unexpected string object. This support detects the
problem and corrects it before the package is returned to the caller that
invoked the method. Lv Zheng.

Implemented extensions to the Concatenate operator. Concatenate now
accepts any type of object, it is not restricted to simply
Integer/String/Buffer. For objects other than these 3 basic data types,
the argument is treated as a string containing the name of the object
type. This expands the utility of Concatenate and the Printf/Fprintf
macros. ACPICA BZ 1222.

Cleaned up the output of the ASL Debug object. The timer() value is now
optional and no longer emitted by default. Also, the basic data types of
Integer/String/Buffer are simply emitted as their values, without a data
type string -- since the data type is obvious from the output. ACPICA BZ
1221.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 102.6K Code, 28.4K Data, 131.0K Total
    Debug Version:     200.3K Code, 81.9K Data, 282.3K Total
  Previous Release:
    Non-Debug Version: 102.0K Code, 28.3K Data, 130.3K Total
    Debug Version:     199.6K Code, 81.8K Data, 281.4K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Fixed some issues with the ASL Include() operator. This operator
was incorrectly defined in the iASL parser rules, causing a new scope to
be opened for the code within the include file. This could lead to
several issues, including allowing ASL code that is technically illegal
and not supported by AML interpreters. Note, this does not affect the
related #include preprocessor operator. ACPICA BZ 1212.

iASL/Disassembler: Implemented support for the ASL ElseIf operator. This
operator is essentially an ASL macro since there is no AML opcode
associated with it. The code emitted by the iASL compiler for ElseIf is
an Else opcode followed immediately by an If opcode. The disassembler
will now emit an ElseIf if it finds an Else immediately followed by an
If. This simplifies the decoded ASL, especially for deeply nested
If..Else and large Switch constructs. Thus, the disassembled code more
closely follows the original source ASL. ACPICA BZ 1211. Example:

    Old disassembly:
        Else
        {
            If (Arg0 == 0x02)
            {
                Local0 = 0x05
            }
        }

    New disassembly:
        ElseIf (Arg0 == 0x02)
        {
            Local0 = 0x05
        }

AcpiExec: Added support for the new module level code behavior and the
early region installation. This required a small change to the
initialization, since AcpiExec must install its own operation region
handlers.

AcpiExec: Added support to make the debug object timer optional. Default
is timer disabled. This cleans up the debug object output -- the timer
data is rarely used.

AcpiExec: Multiple ACPI tables are now loaded in the order that they
appear on the command line. This can be important when there are
interdependencies/references between the tables.

iASL/Templates. Add support to generate template files with multiple
SSDTs within a single output file. Also added ommand line support to
specify the number of SSDTs (in addition to a single DSDT). ACPICA BZ
1223, 1225.


----------------------------------------
24 November 2015. Summary of changes for version 20151124:

1) ACPICA kernel-resident subsystem:

Fixed a possible regression for a previous update to FADT handling. The
FADT no longer has a fixed table ID, causing some issues with code that
was hardwired to a specific ID. Lv Zheng.

Fixed a problem where the method auto-serialization could interfere with
the current SyncLevel. This change makes the auto-serialization support
transparent to the SyncLevel support and management.

Removed support for the _SUB predefined name in AcpiGetObjectInfo. This
interface is intended for early access to the namespace during the
initial namespace device discovery walk. The _SUB method has been seen to
access operation regions in some cases, causing errors because the
operation regions are not fully initialized.

AML Debugger: Fixed some issues with the terminate/quit/exit commands
that can cause faults. Lv Zheng.

AML Debugger: Add thread ID support so that single-step mode only applies
to the AML Debugger thread. This prevents runtime errors within some
kernels. Lv Zheng.

Eliminated extraneous warnings from AcpiGetSleepTypeData. Since the _Sx
methods that are invoked by this interface are optional, removed warnings
emitted for the case where one or more of these methods do not exist.
ACPICA BZ 1208, original change by Prarit Bhargava.

Made a major pass through the entire ACPICA source code base to
standardize formatting that has diverged a bit over time. There are no
functional changes, but this will of course cause quite a few code
differences from the previous ACPICA release.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 102.0K Code, 28.3K Data, 130.3K Total
    Debug Version:     199.6K Code, 81.8K Data, 281.4K Total
  Previous Release:
    Non-Debug Version: 101.7K Code, 27.9K Data, 129.6K Total
    Debug Version:     199.3K Code, 81.4K Data, 280.7K Total


2) iASL Compiler/Disassembler and Tools:

iASL/acpiexec/acpixtract/disassembler: Added support to allow multiple
definition blocks within a single ASL file and the resulting AML file.
Support for this type of file was also added to the various tools that
use binary AML files: acpiexec, acpixtract, and the AML disassembler. The
example code below shows two definition blocks within the same file:

    DefinitionBlock ("dsdt.aml", "DSDT", 2, "Intel", "Template",
0x12345678)
    {
    }
    DefinitionBlock ("", "SSDT", 2, "Intel", "Template", 0xABCDEF01)
    {
    }

iASL: Enhanced typechecking for the Name() operator. All expressions for
the value of the named object must be reduced/folded to a single constant
at compile time, as per the ACPI specification (the AML definition of
Name()).

iASL: Fixed some code indentation issues for the -ic and -ia options (C
and assembly headers). Now all emitted code correctly begins in column 1.

iASL: Added an error message for an attempt to open a Scope() on an
object defined in an SSDT. The DSDT is always loaded into the namespace
first, so any attempt to open a Scope on an SSDT object will fail at
runtime.


----------------------------------------
30 September 2015. Summary of changes for version 20150930:

1) ACPICA kernel-resident subsystem:

Debugger: Implemented several changes and bug fixes to assist support for
the in-kernel version of the AML debugger. Lv Zheng.
- Fix the "predefined" command for in-kernel debugger.
- Do not enter debug command loop for the help and version commands.
- Disallow "execute" command during execution/single-step of a method.

Interpreter: Updated runtime typechecking for all operators that have
target operands. The operand is resolved and validated that it is legal.
For example, the target cannot be a non-data object such as a Device,
Mutex, ThermalZone, etc., as per the ACPI specification.

Debugger: Fixed the double-mutex user I/O handshake to work when local
deadlock detection is enabled.

Debugger: limited display of method locals and arguments (LocalX and
ArgX) to only those that have actually been initialized. This prevents
lines of extraneous output.

Updated the definition of the NFIT table to correct the bit polarity of
one flag: ACPI_NFIT_MEM_ARMED --> ACPI_NFIT_MEM_NOT_ARMED

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 101.7K Code, 27.9K Data, 129.6K Total
    Debug Version:     199.3K Code, 81.4K Data, 280.7K Total
  Previous Release:
    Non-Debug Version: 101.3K Code, 27.7K Data, 129.0K Total
    Debug Version:     198.6K Code, 80.9K Data, 279.5K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Improved the compile-time typechecking for operands of many of the
ASL operators:

-- Added an option to disable compiler operand/operator typechecking (-
ot).

-- For the following operators, the TermArg operands are now validated
when possible to be Integer data objects: BankField, OperationRegion,
DataTableRegion, Buffer, and Package.

-- Store (Source, Target): Both the source and target operands are
resolved and checked that the operands are both legal. For example,
neither operand can be a non-data object such as a Device, Mutex,
ThermalZone, etc. Note, as per the ACPI specification, the CopyObject
operator can be used to store an object to any type of target object.

-- Store (Source, Target): If the source is a Package object, the target
must be a Package object, LocalX, ArgX, or Debug. Likewise, if the target
is a Package, the source must also be a Package.

-- Store (Source, Target): A warning is issued if the source and target
resolve to the identical named object.

-- Store (Source, <method invocation>): An error is generated for the
target method invocation, as this construct is not supported by the AML
interpreter.

-- For all ASL math and logic operators, the target operand must be a
data object (Integer, String, Buffer, LocalX, ArgX, or Debug). This
includes the function return value also.

-- External declarations are also included in the typechecking where
possible. External objects defined using the UnknownObj keyword cannot be
typechecked, however.

iASL and Disassembler: Added symbolic (ASL+) support for the ASL Index
operator:
- Legacy code: Index(PKG1, 3)
- New ASL+ code: PKG1[3]
This completes the ACPI 6.0 ASL+ support as it was the only operator not
supported.

iASL: Fixed the file suffix for the preprocessor output file (.i). Two
spaces were inadvertently appended to the filename, causing file access
and deletion problems on some systems.

ASL Test Suite (ASLTS): Updated the master makefile to generate all
possible compiler output files when building the test suite -- thus
exercising these features of the compiler. These files are automatically
deleted when the test suite exits.


----------------------------------------
18 August 2015. Summary of changes for version 20150818:

1) ACPICA kernel-resident subsystem:

Fix a regression for AcpiGetTableByIndex interface causing it to fail. Lv
Zheng. ACPICA BZ 1186.

Completed development to ensure that the ACPICA Disassembler and Debugger
are fully standalone components of ACPICA. Removed cross-component
dependences. Lv Zheng.

The max-number-of-AML-loops is now runtime configurable (previously was
compile-time only). This is essentially a loop timeout to force-abort
infinite AML loops. ACPCIA BZ 1192.

Debugger: Cleanup output to dump ACPI names and namepaths without any
trailing underscores. Lv Zheng. ACPICA BZ 1135.

Removed unnecessary conditional compilations across the Debugger and
Disassembler components where entire modules could be left uncompiled.

The aapits test is deprecated and has been removed from the ACPICA git
tree. The test has never been completed and has not been maintained, thus
becoming rather useless. ACPICA BZ 1015, 794.

A batch of small changes to close bugzilla and other reports:
- Remove duplicate code for _PLD processing. ACPICA BZ 1176.
- Correctly cleanup after a ACPI table load failure. ACPICA BZ 1185.
- iASL: Support POSIX yacc again in makefile. Jung-uk Kim.
- ACPI table support: general cleanup and simplification. Lv Zheng, Bob
Moore.
- ACPI table support: fix for a buffer read overrun in AcpiTbFindTable.
ACPICA BZ 1184.
- Enhance parameter validation for DataTableRegion and LoadTable ASL/AML
operators.
- Debugger: Split debugger initialization/termination interfaces. Lv
Zheng.
- AcpiExec: Emit OemTableId for SSDTs during the load phase for table
identification.
- AcpiExec: Add debug message during _REG method phase during table
load/init.
- AcpiNames: Fix a regression where some output was missing and no longer
emitted.
- Debugger: General cleanup and simplification. Lv Zheng.
- Disassembler: Cleanup use of several global option variables. Lv Zheng.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 101.3K Code, 27.7K Data, 129.0K Total
    Debug Version:     198.6K Code, 80.9K Data, 279.5K Total
  Previous Release:
    Non-Debug Version: 100.9K Code, 24.5K Data, 125.4K Total
    Debug Version:     197.8K Code, 81.5K Data, 279.3K Total


2) iASL Compiler/Disassembler and Tools:

AcpiExec: Fixed a problem where any more than 32 ACPI tables in the XSDT
were not handled properly and caused load errors. Now, properly invoke
and use the ACPICA auto-reallocate mechanism for ACPI table data
structures. ACPICA BZ 1188

AcpiNames: Add command-line wildcard support for ACPI table files. ACPICA
BZ 1190.

AcpiExec and AcpiNames: Add -l option to load ACPI tables only. For
AcpiExec, this means that no control methods (like _REG/_INI/_STA) are
executed during initialization. ACPICA BZ 1187, 1189.

iASL/Disassembler: Implemented a prototype "listing" mode that emits AML
that corresponds to each disassembled ASL statement, to simplify
debugging. ACPICA BZ 1191.

Debugger: Add option to the "objects" command to display a summary of the
current namespace objects (Object type and count). This is displayed if
the command is entered with no arguments.

AcpiNames: Add -x option to specify debug level, similar to AcpiExec.


----------------------------------------
17 July 2015. Summary of changes for version 20150717:

1) ACPICA kernel-resident subsystem:

Improved the partitioning between the Debugger and Disassembler
components. This allows the Debugger to be used standalone within kernel
code without the Disassembler (which is used for single stepping also).
This renames and moves one file, dmobject.c to dbobject.c. Lv Zheng.

Debugger: Implemented a new command to trace the execution of control
methods (Trace). This is especially useful for the in-kernel version of
the debugger when file I/O may not be available for method trace output.
See the ACPICA reference for more information. Lv Zheng.

Moved all C library prototypes (used for the local versions of these
functions when requested) to a new header, acclib.h
Cleaned up the use of non-ANSI C library functions. These functions are
implemented locally in ACPICA. Moved all such functions to a common
source file, utnonansi.c

Debugger: Fixed a problem with the "!!" command (get last command
executed) where the debugger could enter an infinite loop and eventually
crash.

Removed the use of local macros that were used for some of the standard C
library functions to automatically cast input parameters. This mostly
affected the is* functions where the input parameter is defined to be an
int. This required a few modifications to the main ACPICA source code to
provide casting for these functions and eliminate possible compiler
warnings for these parameters.

Across the source code, added additional status/error checking to resolve
issues discovered by static source code analysis tools such as Coverity.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 100.9K Code, 24.5K Data, 125.4K Total
    Debug Version:     197.8K Code, 81.5K Data, 279.3K Total
  Previous Release:
    Non-Debug Version: 100.6K Code, 27.6K Data, 128.2K Total
    Debug Version:     196.2K Code, 81.0K Data, 277.2K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Fixed a regression where the device map file feature no longer
worked properly when used in conjunction with the disassembler. It only
worked properly with the compiler itself.

iASL: Implemented a new warning for method LocalX variables that are set
but never used (similar to a C compiler such as gcc). This also applies
to ArgX variables that are not defined by the parent method, and are
instead (legally) used as local variables.

iASL/Preprocessor: Finished the pass-through of line numbers from the
preprocessor to the compiler. This ensures that compiler errors/warnings
have the correct original line numbers and filenames, regardless of any
#include files.

iASL/Preprocessor: Fixed a couple of issues with comment handling and the
pass-through of comments to the preprocessor output file (which becomes
the compiler input file). Also fixed a problem with // comments that
appear after a math expression.

iASL: Added support for the TCPA server table to the table compiler and
template generator. (The client table was already previously supported)

iASL/Preprocessor: Added a permanent #define of the symbol "__IASL__" to
identify the iASL compiler.

Cleaned up the use of the macros NEGATIVE and POSITIVE which were defined
multiple times. The new names are ACPI_SIGN_NEGATIVE and
ACPI_SIGN_POSITIVE.

AcpiHelp: Update to expand help messages for the iASL preprocessor
directives.


----------------------------------------
19 June 2015. Summary of changes for version 20150619:

Two regressions in version 20150616 have been addressed:

Fixes some problems/issues with the C library macro removal (ACPI_STRLEN,
etc.) This update changes ACPICA to only use the standard headers for
functions, or the prototypes for the local versions of the C library
functions. Across the source code, this required some additional casts
for some Clib invocations for portability. Moved all local prototypes to
a new file, acclib.h

Fixes several problems with recent changes to the handling of the FACS
table that could cause some systems not to boot.


----------------------------------------
16 June 2015. Summary of changes for version 20150616:


1) ACPICA kernel-resident subsystem:

Across the entire ACPICA source code base, the various macros for the C
library functions (such as ACPI_STRLEN, etc.) have been removed and
replaced by the standard C library names (strlen, etc.) The original
purpose for these macros is no longer applicable. This simplification
reduces the number of macros used in the ACPICA source code
significantly, improving readability and maintainability.

Implemented support for a new ACPI table, the OSDT. This table, the
"override" SDT, can be loaded directly by the host OS at boot time. It
enables the replacement of existing namespace objects that were installed
via the DSDT and/or SSDTs. The primary purpose for this is to replace
buggy or incorrect ASL/AML code obtained via the BIOS. The OSDT is slated
for inclusion in a future version of the ACPI Specification. Lv Zheng/Bob
Moore.

Added support for systems with (improperly) two FACS tables -- a "32-bit"
table (via FADT 32-bit legacy field) and a "64-bit" table (via the 64-bit
X field). This change will support both automatically. There continues to
be systems found with this issue. This support requires a change to the
AcpiSetFirmwareWakingVector interface. Also, a public global variable has
been added to allow the host to select which FACS is desired
(AcpiGbl_Use32BitFacsAddresses). See the ACPICA reference for more
details Lv Zheng.

Added a new feature to allow for systems that do not contain an FACS.
Although this is already supported on hardware-reduced platforms, the
feature has been extended for all platforms. The reasoning is that we do
not want to abort the entire ACPICA initialization just because the
system is seriously buggy and has no FACS.

Fixed a problem where the GUID strings for NFIT tables (in acuuid.h) were
not correctly transcribed from the ACPI specification in ACPICA version
20150515.

Implemented support for the _CLS object in the AcpiGetObjectInfo external
interface.

Updated the definitions of the TCPA and TPM2 ACPI tables to the more
recent TCG ACPI Specification, December 14, 2014. Table disassembler and
compiler also updated. Note: The TCPA "server" table is not supported by
the disassembler/table-compiler at this time.

ACPI 6.0: Added definitions for the new GIC version field in the MADT.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version: 100.6K Code, 27.6K Data, 128.2K Total
    Debug Version:     196.2K Code, 81.0K Data, 277.2K Total
  Previous Release:
    Non-Debug Version:  99.9K Code, 27.5K Data, 127.4K Total
    Debug Version:     195.2K Code, 80.8K Data, 276.0K Total


2) iASL Compiler/Disassembler and Tools:

Disassembler: Fixed a problem with the new symbolic operator disassembler
where incorrect ASL code could be emitted in some cases for the "non-
commutative" operators -- Subtract, Divide, Modulo, ShiftLeft, and
ShiftRight. The actual problem cases seem to be rather unusual in common
ASL code, however. David Box.

Modified the linux version of acpidump to obtain ACPI tables from not
just /dev/mem (which may not exist) and /sys/firmware/acpi/tables. Lv
Zheng.

iASL: Fixed a problem where the user preprocessor output file (.i)
contained extra data that was not expected. The compiler was using this
file as a temporary file and passed through #line directives in order to
keep compiler error messages in sync with the input file and line number
across multiple include files. The (.i) is no longer a temporary file as
the compiler uses a new, different file for the original purpose.

iASL: Fixed a problem where comments within the original ASL source code
file were not passed through to the preprocessor output file, nor any
listing files.

iASL: Fixed some issues for the handling of the "#include" preprocessor
directive and the similar (but not the same) "Include" ASL operator.

iASL: Add support for the new OSDT in both the disassembler and compiler.

iASL: Fixed a problem with the constant folding support where a Buffer
object could be incorrectly generated (incorrectly formed) during a
conversion to a Store() operator.

AcpiHelp: Updated for new NFIT GUIDs, "External" AML opcode, and new
description text for the _REV predefined name. _REV now permanently
returns 2, as per the ACPI 6.0 specification.

Debugger: Enhanced the output of the Debug ASL object for references
produced by the Index operator. For Buffers and strings, only output the
actual byte pointed to by the index. For packages, only print the single
package element decoded by the index. Previously, the entire
buffer/string/package was emitted.

iASL/Table-compiler: Fixed a regression where the "generic" data types
were no longer recognized, causing errors.


----------------------------------------
15 May 2015. Summary of changes for version 20150515:

This release implements most of ACPI 6.0 as described below.

1) ACPICA kernel-resident subsystem:

Implemented runtime argument checking and return value checking for all
new ACPI 6.0 predefined names. This includes: _BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

  Current Release:
    Non-Debug Version:  99.9K Code, 27.5K Data, 127.4K Total
    Debug Version:     195.2K Code, 80.8K Data, 276.0K Total
  Previous Release:
    Non-Debug Version:  99.1K Code, 27.3K Data, 126.4K Total
    Debug Version:     192.8K Code, 79.9K Data, 272.7K Total


2) iASL Compiler/Disassembler and Tools:

iASL compiler: Added compile-time support for all new ACPI 6.0 predefined
names (argument count validation and return value typechecking.)

iASL disassembler and table compiler: implemented support for all new
ACPI 6.0 tables. This includes: DRTM, IORT, LPIT, NFIT, STAO, WPBT, XENV.

iASL disassembler and table compiler: Added ACPI 6.0 changes to existing
tables: FADT, MADT.

iASL preprocessor: Added a new directive to enable inclusion of binary
blobs into ASL code. The new directive is #includebuffer. It takes a
binary file as input and emits a named ascii buffer object into the ASL
code.

AcpiHelp: Added support for all new ACPI 6.0 predefined names.

AcpiHelp: Added a new option, -d, to display all iASL preprocessor
directives.

AcpiHelp: Added a new option, -t, to display all known/supported ACPI
tables.

diffstat:

 sysutils/acpica-utils/Makefile |   4 ++--
 sysutils/acpica-utils/distinfo |  19 +++++++++----------
 2 files changed, 11 insertions(+), 12 deletions(-)

diffs (37 lines):

diff -r 46bedda99ff2 -r 7746a789865a sysutils/acpica-utils/Makefile
--- a/sysutils/acpica-utils/Makefile    Fri Oct 14 06:42:48 2016 +0000
+++ b/sysutils/acpica-utils/Makefile    Fri Oct 14 10:31:12 2016 +0000
@@ -1,7 +1,7 @@
-# $NetBSD: Makefile,v 1.9 2015/04/16 14:21:01 wiz Exp $
+# $NetBSD: Makefile,v 1.10 2016/10/14 10:31:12 maya Exp $
 #
 
-DISTNAME=      acpica-unix2-20150410
+DISTNAME=      acpica-unix2-20160930
 PKGNAME=       ${DISTNAME:S/-unix2-/-utils-/}
 CATEGORIES=    sysutils devel
 MASTER_SITES=  https://acpica.org/sites/acpica/files/
diff -r 46bedda99ff2 -r 7746a789865a sysutils/acpica-utils/distinfo
--- a/sysutils/acpica-utils/distinfo    Fri Oct 14 06:42:48 2016 +0000
+++ b/sysutils/acpica-utils/distinfo    Fri Oct 14 10:31:12 2016 +0000
@@ -1,11 +1,10 @@
-$NetBSD: distinfo,v 1.9 2015/11/04 01:32:05 agc Exp $
+$NetBSD: distinfo,v 1.10 2016/10/14 10:31:12 maya Exp $
 
-SHA1 (acpica-unix2-20150410.tar.gz) = aa1bd36272b9151bb19402dac9db72bcea5a95b0
-RMD160 (acpica-unix2-20150410.tar.gz) = 2b4186e1fd2697eb731f25dac311bc469d78b672
-SHA512 (acpica-unix2-20150410.tar.gz) = 16e6b5e7311966a6ba85058fcd450990b2dcc80b82031e0770d90fb5023a1b68ea2c7976b3744eb63e261c7ac6a6b224a91a148c82936085a207ed2370d18946
-Size (acpica-unix2-20150410.tar.gz) = 1337136 bytes
-SHA1 (acpitests-unix-20150410.tar.gz) = 28bfafa391c3d4daad9ce49e88cda3b16ace5897
-RMD160 (acpitests-unix-20150410.tar.gz) = 8fd7ef601b6abcfa79f5513cd3b8460954f80d31
-SHA512 (acpitests-unix-20150410.tar.gz) = 9df9698fd3f21d1060529033464c1e013c995ec2cc4b95d45fcd4c3508b770e00ed143e47c043338a00c11c14ff4067e70e156550f1d6977e4a83af631b27a14
-Size (acpitests-unix-20150410.tar.gz) = 2052271 bytes
-SHA1 (patch-generate_unix_Makefile.config) = 318859079fcb1c4d6a24a4df1f0cbdcc2581a9eb
+SHA1 (acpica-unix2-20160930.tar.gz) = 45b1d14454b8986ed56ec81c217694131becbcbf
+RMD160 (acpica-unix2-20160930.tar.gz) = f58d5cbfe516340f168b8e2090c656097c7964cd
+SHA512 (acpica-unix2-20160930.tar.gz) = 9d3eb7ece52bd62ff5784f7173b7ad5d1140bcb56c8ed4256d7293b0f6d296c5ad600636c26f6fbc0989440839b2e986ae387c65389451538779748d1d932b1a
+Size (acpica-unix2-20160930.tar.gz) = 1424425 bytes
+SHA1 (acpitests-unix-20160930.tar.gz) = 395c3c2103cbf80a5f73ff9cde16d6e1096e4a5d
+RMD160 (acpitests-unix-20160930.tar.gz) = f9d3e152191c2595301e2356441fca8630c36b0e
+SHA512 (acpitests-unix-20160930.tar.gz) = f982826e01de7a79da543c2ca99dfc9459829a03332841dfe00f45bfc1620bdfa986a5ce4c8bbee2933325c1c526434c04e3601d727fb111f049e71e080a4c71
+Size (acpitests-unix-20160930.tar.gz) = 1829886 bytes