pkgsrc-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[pkgsrc/trunk]: pkgsrc/www/seamonkey Remove patch that adds a .s file as .S f...



details:   https://anonhg.NetBSD.org/pkgsrc/rev/b8e05f4783b4
branches:  trunk
changeset: 352674:b8e05f4783b4
user:      wiz <wiz%pkgsrc.org@localhost>
date:      Sun Sep 18 11:09:42 2016 +0000

description:
Remove patch that adds a .s file as .S file.

I can't believe both copies are needed.

Addresses "pkgsrc cannot be checked out on a case-insensitive file system"
by Jonathan Schleifer, PR 51485.

diffstat:

 www/seamonkey/distinfo                                        |    3 +-
 www/seamonkey/patches/patch-mozilla_gfx_ycbcr_yuv__row__arm.S |  317 ----------
 2 files changed, 1 insertions(+), 319 deletions(-)

diffs (truncated from 338 to 300 lines):

diff -r 3ec88da940ee -r b8e05f4783b4 www/seamonkey/distinfo
--- a/www/seamonkey/distinfo    Sun Sep 18 11:00:02 2016 +0000
+++ b/www/seamonkey/distinfo    Sun Sep 18 11:09:42 2016 +0000
@@ -1,4 +1,4 @@
-$NetBSD: distinfo,v 1.136 2016/04/14 21:09:07 dholland Exp $
+$NetBSD: distinfo,v 1.137 2016/09/18 11:09:42 wiz Exp $
 
 SHA1 (seamonkey-2.40.source.tar.xz) = ecf99bc7478319835a0e19f35ed5b7b1aa2c0046
 RMD160 (seamonkey-2.40.source.tar.xz) = 4030688f145fdf35a6d2728d097cf7cda8e50231
@@ -44,7 +44,6 @@
 SHA1 (patch-mozilla_gfx_skia_skia_src_opts_memset.arm.S) = 7e7e9ba1638935b81128bdf5bc01005797add4cb
 SHA1 (patch-mozilla_gfx_thebes_moz.build) = 96d4ed71a095cc5acee7ad2cb3fa18bdb0b5630a
 SHA1 (patch-mozilla_gfx_ycbcr_moz.build) = 263c37980558d485e868a7097689cdf35c5f678d
-SHA1 (patch-mozilla_gfx_ycbcr_yuv__row__arm.S) = 74c70bad49b9781dae6be4fd46c33da886bcfd34
 SHA1 (patch-mozilla_gfx_ycbcr_yuv__row__arm.s) = c7d85b54adfca2b3ee0d0fb44859cb641d1e45c5
 SHA1 (patch-mozilla_image_decoders_nsJPEGDecoder.cpp) = ff09ce62a57b0024cf664e807afc813fc25eefdf
 SHA1 (patch-mozilla_intl_hyphenation_glue_hnjalloc.h) = 773997168c0b25003f2b326c7c109e8cd454cded
diff -r 3ec88da940ee -r b8e05f4783b4 www/seamonkey/patches/patch-mozilla_gfx_ycbcr_yuv__row__arm.S
--- a/www/seamonkey/patches/patch-mozilla_gfx_ycbcr_yuv__row__arm.S     Sun Sep 18 11:00:02 2016 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,317 +0,0 @@
-$NetBSD: patch-mozilla_gfx_ycbcr_yuv__row__arm.S,v 1.1 2015/01/02 04:26:21 ryoon Exp $
-
---- mozilla/gfx/ycbcr/yuv_row_arm.S.orig       2015-01-01 17:44:52.000000000 +0000
-+++ mozilla/gfx/ycbcr/yuv_row_arm.S
-@@ -0,0 +1,312 @@
-+/* This Source Code Form is subject to the terms of the Mozilla Public
-+ * License, v. 2.0. If a copy of the MPL was not distributed with this
-+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
-+
-+#if defined(__ARM_EABI__) && !defined(__ARM_DWARF_EH__)
-+#define UNWIND
-+#else
-+#define UNWIND @
-+#endif
-+
-+    .arch   armv7-a
-+    .fpu    neon
-+/* Allow to build on targets not supporting neon, and force the object file
-+ * target to avoid bumping the final binary target */
-+    .object_arch armv4t
-+    .text
-+    .align
-+
-+    .balign 64
-+YCbCr42xToRGB565_DITHER03_CONSTS_NEON:
-+    .short -14240
-+    .short -14240+384
-+    .short   8672
-+    .short   8672+192
-+    .short -17696
-+    .short -17696+384
-+    .byte 102
-+    .byte  25
-+    .byte  52
-+    .byte 129
-+YCbCr42xToRGB565_DITHER12_CONSTS_NEON:
-+    .short -14240+128
-+    .short -14240+256
-+    .short   8672+64
-+    .short   8672+128
-+    .short -17696+128
-+    .short -17696+256
-+    .byte 102
-+    .byte  25
-+    .byte  52
-+    .byte 129
-+YCbCr42xToRGB565_DITHER21_CONSTS_NEON:
-+    .short -14240+256
-+    .short -14240+128
-+    .short   8672+128
-+    .short   8672+64
-+    .short -17696+256
-+    .short -17696+128
-+    .byte 102
-+    .byte  25
-+    .byte  52
-+    .byte 129
-+YCbCr42xToRGB565_DITHER30_CONSTS_NEON:
-+    .short -14240+384
-+    .short -14240
-+    .short   8672+192
-+    .short   8672
-+    .short -17696+384
-+    .short -17696
-+    .byte 102
-+    .byte  25
-+    .byte  52
-+    .byte 129
-+
-+@ void ScaleYCbCr42xToRGB565_BilinearY_Row_NEON(
-+@  yuv2rgb565_row_scale_bilinear_ctx *ctx, int dither);
-+@
-+@ ctx = {
-+@   uint16_t *rgb_row;       /*r0*/
-+@   const uint8_t *y_row;    /*r1*/
-+@   const uint8_t *u_row;    /*r2*/
-+@   const uint8_t *v_row;    /*r3*/
-+@   int y_yweight;           /*r4*/
-+@   int y_pitch;             /*r5*/
-+@   int width;               /*r6*/
-+@   int source_x0_q16;       /*r7*/
-+@   int source_dx_q16;       /*r8*/
-+@   int source_uv_xoffs_q16; /*r9*/
-+@ };
-+    .global ScaleYCbCr42xToRGB565_BilinearY_Row_NEON
-+    .type   ScaleYCbCr42xToRGB565_BilinearY_Row_NEON, %function
-+    .balign 64
-+    .cfi_startproc
-+    UNWIND .fnstart
-+ScaleYCbCr42xToRGB565_BilinearY_Row_NEON:
-+    STMFD       r13!,{r4-r9,r14}       @ 8 words.
-+    ADR         r14,YCbCr42xToRGB565_DITHER03_CONSTS_NEON
-+    VPUSH       {Q4-Q7}                @ 16 words.
-+    ADD         r14,r14,r1, LSL #4     @ Select the dither table to use
-+    LDMIA       r0, {r0-r9}
-+    @ Set up image index registers.
-+    ADD         r12,r8, r8
-+    VMOV.I32    D16,#0         @ Q8 = < 2| 2| 0| 0>*source_dx_q16
-+    VDUP.32     D17,r12
-+    ADD         r12,r12,r12
-+    VTRN.32     D16,D17        @ Q2 = < 2| 0| 2| 0>*source_dx_q16
-+    VDUP.32     D19,r12        @ Q9 = < 4| 4| ?| ?>*source_dx_q16
-+    ADD         r12,r12,r12
-+    VDUP.32     Q0, r7         @ Q0 = < 1| 1| 1| 1>*source_x0_q16
-+    VADD.I32    D17,D17,D19    @ Q8 = < 6| 4| 2| 0>*source_dx_q16
-+    CMP         r8, #0                 @ If source_dx_q16 is negative...
-+    VDUP.32     Q9, r12        @ Q9 = < 8| 8| 8| 8>*source_dx_q16
-+    ADDLT       r7, r7, r8, LSL #4     @ Make r7 point to the end of the block
-+    VADD.I32    Q0, Q0, Q8     @ Q0 = < 6| 4| 2| 0>*source_dx_q16+source_x0_q16
-+    SUBLT       r7, r7, r8             @ (i.e., the lowest address we'll use)
-+    VADD.I32    Q1, Q0, Q9     @ Q1 = <14|12|10| 8>*source_dx_q16+source_x0_q16
-+    VDUP.I32    Q9, r8         @ Q8 = < 1| 1| 1| 1>*source_dx_q16
-+    VADD.I32    Q2, Q0, Q9     @ Q2 = < 7| 5| 3| 1>*source_dx_q16+source_x0_q16
-+    VADD.I32    Q3, Q1, Q9     @ Q3 = <15|13|11| 9>*source_dx_q16+source_x0_q16
-+    VLD1.64     {D30,D31},[r14,:128]   @ Load some constants
-+    VMOV.I8     D28,#52
-+    VMOV.I8     D29,#129
-+    @ The basic idea here is to do aligned loads of a block of data and then
-+    @  index into it using VTBL to extract the data from the source X
-+    @  coordinate corresponding to each destination pixel.
-+    @ This is significantly less code and significantly fewer cycles than doing
-+    @  a series of single-lane loads, but it means that the X step between
-+    @  pixels must be limited to 2.0 or less, otherwise we couldn't guarantee
-+    @  that we could read 8 pixels from a single aligned 32-byte block of data.
-+    @ Q0...Q3 contain the 16.16 fixed-point X coordinates of each pixel,
-+    @  separated into even pixels and odd pixels to make extracting offsets and
-+    @  weights easier.
-+    @ We then pull out two bytes from the middle of each coordinate: the top
-+    @  byte corresponds to the integer part of the X coordinate, and the bottom
-+    @  byte corresponds to the weight to use for bilinear blending.
-+    @ These are separated out into different registers with VTRN.
-+    @ Then by subtracting the integer X coordinate of the first pixel in the
-+    @  data block we loaded, we produce an index register suitable for use by
-+    @  VTBL.
-+s42xbily_neon_loop:
-+    @ Load the Y' data.
-+    MOV         r12,r7, ASR #16
-+    VRSHRN.S32  D16,Q0, #8
-+    AND         r12,r12,#~15   @ Read 16-byte aligned blocks
-+    VDUP.I8     D20,r12
-+    ADD         r12,r1, r12    @ r12 = y_row+(source_x&~7)
-+    VRSHRN.S32  D17,Q1, #8
-+    PLD         [r12,#64]
-+    VLD1.64     {D8, D9, D10,D11},[r12,:128],r5        @ Load Y' top row
-+    ADD         r14,r7, r8, LSL #3
-+    VRSHRN.S32  D18,Q2, #8
-+    MOV         r14,r14,ASR #16
-+    VRSHRN.S32  D19,Q3, #8
-+    AND         r14,r14,#~15   @ Read 16-byte aligned blocks
-+    VLD1.64     {D12,D13,D14,D15},[r12,:128]           @ Load Y' bottom row
-+    PLD         [r12,#64]
-+    VDUP.I8     D21,r14
-+    ADD         r14,r1, r14    @ r14 = y_row+(source_x&~7)
-+    VMOV.I8     Q13,#1
-+    PLD         [r14,#64]
-+    VTRN.8      Q8, Q9         @ Q8  = <wFwEwDwCwBwAw9w8w7w6w5w4w3w2w1w0>
-+                               @ Q9  = <xFxExDxCxBxAx9x8x7x6x5x4x3x2x1x0>
-+    VSUB.S8     Q9, Q9, Q10    @ Make offsets relative to the data we loaded.
-+    @ First 8 Y' pixels
-+    VTBL.8      D20,{D8, D9, D10,D11},D18      @ Index top row at source_x
-+    VTBL.8      D24,{D12,D13,D14,D15},D18      @ Index bottom row at source_x
-+    VADD.S8     Q13,Q9, Q13                    @ Add 1 to source_x
-+    VTBL.8      D22,{D8, D9, D10,D11},D26      @ Index top row at source_x+1
-+    VTBL.8      D26,{D12,D13,D14,D15},D26      @ Index bottom row at source_x+1
-+    @ Next 8 Y' pixels
-+    VLD1.64     {D8, D9, D10,D11},[r14,:128],r5        @ Load Y' top row
-+    VLD1.64     {D12,D13,D14,D15},[r14,:128]           @ Load Y' bottom row
-+    PLD         [r14,#64]
-+    VTBL.8      D21,{D8, D9, D10,D11},D19      @ Index top row at source_x
-+    VTBL.8      D25,{D12,D13,D14,D15},D19      @ Index bottom row at source_x
-+    VTBL.8      D23,{D8, D9, D10,D11},D27      @ Index top row at source_x+1
-+    VTBL.8      D27,{D12,D13,D14,D15},D27      @ Index bottom row at source_x+1
-+    @ Blend Y'.
-+    VDUP.I16    Q9, r4         @ Load the y weights.
-+    VSUBL.U8    Q4, D24,D20    @ Q5:Q4 = c-a
-+    VSUBL.U8    Q5, D25,D21
-+    VSUBL.U8    Q6, D26,D22    @ Q7:Q6 = d-b
-+    VSUBL.U8    Q7, D27,D23
-+    VMUL.S16    Q4, Q4, Q9     @ Q5:Q4 = (c-a)*yweight
-+    VMUL.S16    Q5, Q5, Q9
-+    VMUL.S16    Q6, Q6, Q9     @ Q7:Q6 = (d-b)*yweight
-+    VMUL.S16    Q7, Q7, Q9
-+    VMOVL.U8    Q12,D16        @ Promote the x weights to 16 bits.
-+    VMOVL.U8    Q13,D17        @ Sadly, there's no VMULW.
-+    VRSHRN.S16  D8, Q4, #8     @ Q4 = (c-a)*yweight+128>>8
-+    VRSHRN.S16  D9, Q5, #8
-+    VRSHRN.S16  D12,Q6, #8     @ Q6 = (d-b)*yweight+128>>8
-+    VRSHRN.S16  D13,Q7, #8
-+    VADD.I8     Q10,Q10,Q4     @ Q10 = a+((c-a)*yweight+128>>8)
-+    VADD.I8     Q11,Q11,Q6     @ Q11 = b+((d-b)*yweight+128>>8)
-+    VSUBL.U8    Q4, D22,D20    @ Q5:Q4 = b-a
-+    VSUBL.U8    Q5, D23,D21
-+    VMUL.S16    Q4, Q4, Q12    @ Q5:Q4 = (b-a)*xweight
-+    VMUL.S16    Q5, Q5, Q13
-+    VRSHRN.S16  D8, Q4, #8     @ Q4 = (b-a)*xweight+128>>8
-+    ADD         r12,r7, r9
-+    VRSHRN.S16  D9, Q5, #8
-+    MOV         r12,r12,ASR #17
-+    VADD.I8     Q8, Q10,Q4     @ Q8 = a+((b-a)*xweight+128>>8)
-+    @ Start extracting the chroma x coordinates, and load Cb and Cr.
-+    AND         r12,r12,#~15   @ Read 16-byte aligned blocks
-+    VDUP.I32    Q9, r9         @ Q9 = source_uv_xoffs_q16 x 4
-+    ADD         r14,r2, r12
-+    VADD.I32    Q10,Q0, Q9
-+    VLD1.64     {D8, D9, D10,D11},[r14,:128]   @ Load Cb
-+    PLD         [r14,#64]
-+    VADD.I32    Q11,Q1, Q9
-+    ADD         r14,r3, r12
-+    VADD.I32    Q12,Q2, Q9
-+    VLD1.64     {D12,D13,D14,D15},[r14,:128]   @ Load Cr
-+    PLD         [r14,#64]
-+    VADD.I32    Q13,Q3, Q9
-+    VRSHRN.S32  D20,Q10,#9     @ Q10 = <xEwExCwCxAwAx8w8x6w6x4w4x2w2x0w0>
-+    VRSHRN.S32  D21,Q11,#9
-+    VDUP.I8     Q9, r12
-+    VRSHRN.S32  D22,Q12,#9     @ Q11 = <xFwFxDwDxBwBx9w9x7w7x5w5x3w3x1w1>
-+    VRSHRN.S32  D23,Q13,#9
-+    @ We don't actually need the x weights, but we get them for free.
-+    @ Free ALU slot
-+    VTRN.8      Q10,Q11        @ Q10 = <wFwEwDwCwBwAw9w8w7w6w5w4w3w2w1w0>
-+    @ Free ALU slot            @ Q11 = <xFxExDxCxBxAx9x8x7x6x5x4x3x2x1x0>
-+    VSUB.S8     Q11,Q11,Q9     @ Make offsets relative to the data we loaded.
-+    VTBL.8      D18,{D8, D9, D10,D11},D22      @ Index Cb at source_x
-+    VMOV.I8     D24,#74
-+    VTBL.8      D19,{D8, D9, D10,D11},D23
-+    VMOV.I8     D26,#102
-+    VTBL.8      D20,{D12,D13,D14,D15},D22      @ Index Cr at source_x
-+    VMOV.I8     D27,#25
-+    VTBL.8      D21,{D12,D13,D14,D15},D23
-+    @ We now have Y' in Q8, Cb in Q9, and Cr in Q10
-+    @ We use VDUP to expand constants, because it's a permute instruction, so
-+    @  it can dual issue on the A8.
-+    SUBS        r6, r6, #16    @ width -= 16
-+    VMULL.U8    Q4, D16,D24    @  Q5:Q4  = Y'*74
-+    VDUP.32     Q6, D30[1]     @  Q7:Q6  = bias_G
-+    VMULL.U8    Q5, D17,D24
-+    VDUP.32     Q7, D30[1]
-+    VMLSL.U8    Q6, D18,D27    @  Q7:Q6  = -25*Cb+bias_G
-+    VDUP.32     Q11,D30[0]     @ Q12:Q11 = bias_R
-+    VMLSL.U8    Q7, D19,D27
-+    VDUP.32     Q12,D30[0]
-+    VMLAL.U8    Q11,D20,D26    @ Q12:Q11 = 102*Cr+bias_R
-+    VDUP.32     Q8, D31[0]     @ Q13:Q8  = bias_B
-+    VMLAL.U8    Q12,D21,D26
-+    VDUP.32     Q13,D31[0]
-+    VMLAL.U8    Q8, D18,D29    @ Q13:Q8  = 129*Cb+bias_B
-+    VMLAL.U8    Q13,D19,D29
-+    VMLSL.U8    Q6, D20,D28    @  Q7:Q6  = -25*Cb-52*Cr+bias_G
-+    VMLSL.U8    Q7, D21,D28
-+    VADD.S16    Q11,Q4, Q11    @ Q12:Q11 = 74*Y'+102*Cr+bias_R
-+    VADD.S16    Q12,Q5, Q12
-+    VQADD.S16   Q8, Q4, Q8     @ Q13:Q8  = 74*Y'+129*Cr+bias_B
-+    VQADD.S16   Q13,Q5, Q13
-+    VADD.S16    Q6, Q4, Q6     @  Q7:Q6  = 74*Y'-25*Cb-52*Cr+bias_G
-+    VADD.S16    Q7, Q5, Q7
-+    @ Push each value to the top of its word and saturate it.
-+    VQSHLU.S16 Q11,Q11,#2
-+    VQSHLU.S16 Q12,Q12,#2
-+    VQSHLU.S16 Q6, Q6, #2
-+    VQSHLU.S16 Q7, Q7, #2
-+    VQSHLU.S16 Q8, Q8, #2
-+    VQSHLU.S16 Q13,Q13,#2
-+    @ Merge G and B into R.
-+    VSRI.U16   Q11,Q6, #5
-+    VSRI.U16   Q12,Q7, #5
-+    VSRI.U16   Q11,Q8, #11
-+    MOV         r14,r8, LSL #4
-+    VSRI.U16   Q12,Q13,#11
-+    BLT s42xbily_neon_tail
-+    VDUP.I32    Q13,r14
-+    @ Store the result.
-+    VST1.16     {D22,D23,D24,D25},[r0]!
-+    BEQ s42xbily_neon_done
-+    @ Advance the x coordinates.
-+    VADD.I32    Q0, Q0, Q13
-+    VADD.I32    Q1, Q1, Q13
-+    ADD         r7, r14
-+    VADD.I32    Q2, Q2, Q13
-+    VADD.I32    Q3, Q3, Q13



Home | Main Index | Thread Index | Old Index