pkgsrc-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[pkgsrc/trunk]: pkgsrc/chat/vicq chat: Remove vicq.



details:   https://anonhg.NetBSD.org/pkgsrc/rev/f40989663007
branches:  trunk
changeset: 347165:f40989663007
user:      nia <nia%pkgsrc.org@localhost>
date:      Wed Jan 08 14:22:14 2020 +0000

description:
chat: Remove vicq.

Upstream is gone, and there have been numerous changes to the ICQ protocol
that rendered third-party clients non-functional since this was last updated.

There is an archive on GitHub which states:

"This is just an archive of very old project. It's not supported,
not functional and has no other value except sentimental"

diffstat:

 chat/vicq/DESCR            |   3 ---
 chat/vicq/Makefile         |  36 ------------------------------------
 chat/vicq/PLIST            |   4 ----
 chat/vicq/distinfo         |   8 --------
 chat/vicq/patches/patch-ab |  46 ----------------------------------------------
 chat/vicq/patches/patch-ac |  12 ------------
 6 files changed, 0 insertions(+), 109 deletions(-)

diffs (133 lines):

diff -r 0cffdc02c8a4 -r f40989663007 chat/vicq/DESCR
--- a/chat/vicq/DESCR   Wed Jan 08 14:19:43 2020 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,3 +0,0 @@
-vICQ is simple ICQ client written in perl with look & feel of micq
-and works fine with v7 protocol of ICQ. It is based on Net::ICQ2000
-module written by Robin Fisher.
diff -r 0cffdc02c8a4 -r f40989663007 chat/vicq/Makefile
--- a/chat/vicq/Makefile        Wed Jan 08 14:19:43 2020 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,36 +0,0 @@
-# $NetBSD: Makefile,v 1.41 2019/08/11 13:18:06 wiz Exp $
-
-DISTNAME=      vicq-0.4.1
-PKGREVISION=   14
-CATEGORIES=    chat
-MASTER_SITES=  ${HOMEPAGE}
-EXTRACT_SUFX=  .tar.bz2
-
-MAINTAINER=    pkgsrc-users%NetBSD.org@localhost
-#HOMEPAGE=     http://gonzo.kiev.ua/projects/vicq.old/
-COMMENT=       Simple icq client written in perl
-LICENSE=       gnu-gpl-v2
-
-#DEPENDS+=     {perl>=5.17.7,p5-Term-ReadLine>=1.11}:../../devel/p5-Term-ReadLine
-
-WRKSRC=                        ${WRKDIR}/vicq
-CONFIGURE_DIRS=                Net/vICQ
-TEST_TARGET=           # disabled
-
-REPLACE_PERL=          vicq
-PERL5_PACKLIST=                auto/Net/vICQ/.packlist
-
-INSTALLATION_DIRS=     bin ${PKGMANDIR}/man1 share/examples/vicq
-
-post-build:
-       ${PREFIX}/bin/pod2man ${WRKSRC}/vicq --section=1 \
-           --release="vICQ ${DISTNAME:C/.*-//}" \
-           --center="vICQ manual page" >  ${WRKSRC}/vicq.1
-
-post-install:
-       ${INSTALL_SCRIPT} ${WRKSRC}/vicq ${DESTDIR}${PREFIX}/bin
-       ${INSTALL_DATA} ${WRKSRC}/vicqrc.example ${DESTDIR}${PREFIX}/share/examples/vicq
-       ${INSTALL_DATA} ${WRKSRC}/vicq.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
-
-.include "../../lang/perl5/module.mk"
-.include "../../mk/bsd.pkg.mk"
diff -r 0cffdc02c8a4 -r f40989663007 chat/vicq/PLIST
--- a/chat/vicq/PLIST   Wed Jan 08 14:19:43 2020 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,4 +0,0 @@
-@comment $NetBSD: PLIST,v 1.4 2009/06/14 17:37:51 joerg Exp $
-bin/vicq
-man/man1/vicq.1
-share/examples/vicq/vicqrc.example
diff -r 0cffdc02c8a4 -r f40989663007 chat/vicq/distinfo
--- a/chat/vicq/distinfo        Wed Jan 08 14:19:43 2020 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,8 +0,0 @@
-$NetBSD: distinfo,v 1.10 2015/11/03 01:20:25 agc Exp $
-
-SHA1 (vicq-0.4.1.tar.bz2) = 824f49adb0f17d3f8c1593517db80fed5c70353c
-RMD160 (vicq-0.4.1.tar.bz2) = 4c1e24baf2ae3aa8206eb9cd611ba6dfed9efce5
-SHA512 (vicq-0.4.1.tar.bz2) = f5ef6d2217e96d7714b8fea048dbdc155dd36247b54653c3e0bf79df79435f1a9b96f61f83b0b6e79a33848fdab4d34e4607399e0b762586613e2bb52263d28e
-Size (vicq-0.4.1.tar.bz2) = 54292 bytes
-SHA1 (patch-ab) = c41c38e74b0e43994bd74b8df2ed7e18fd3c8355
-SHA1 (patch-ac) = ef9fba66af10197d8975076c3caaf310c8549175
diff -r 0cffdc02c8a4 -r f40989663007 chat/vicq/patches/patch-ab
--- a/chat/vicq/patches/patch-ab        Wed Jan 08 14:19:43 2020 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,46 +0,0 @@
-$NetBSD: patch-ab,v 1.4 2013/06/12 12:11:49 wiz Exp $
-
---- vicq.orig  2002-04-15 16:55:17.000000000 +0000
-+++ vicq       2013-06-12 12:09:25.000000000 +0000
-@@ -557,12 +557,12 @@
- 
- change status to 'Free for chat'
- 
--=back
--
- =item B<offline>
- 
- change status to 'Offline/Disconnect'
- 
-+=back
-+
- =head2 Contact list managment
- 
- =over 4
-@@ -2010,7 +2010,7 @@
-               $config{log_path} = expand_file($config{log_path});
-               $config{log_path}.='/' unless $config{log_path}=~/\/$/;
-       }else{
--              $config{log_path}="$ENV{HOME}/.vicq/history/";
-+              $config{log_path}="$ENV{HOME}/.vicq/history";
-                 }
-       unless( -e $config{log_path} || $config{log_path} eq $ENV{HOME})
-       {
-@@ -2494,7 +2494,7 @@
-       $uin =~ s/\033\[.m//g;
- 
-       my $fname=($config{log_type}=~/a/)?'vicq.log':"$uin.log";
--      open LOG,">> $config{log_path}$fname" or warn "Can't open file $config{log_path}$fname";
-+      open LOG,">> $config{log_path}/$fname" or warn "Can't open file $config{log_path}$fname";
-       print LOG "--[$format $now_string\n";
-       print LOG $message;
-       print LOG "\n" if $config{log_type}=~/n/;
-@@ -2834,7 +2834,7 @@
-       my $pager = $ENV{'PAGER'} || 'less -R';
-       my $home = $ENV{HOME};
-       my $fname=($config{log_type}=~/a/)?'vicq.log':"$uin.log";
--      if(!(open LOG,"< $config{log_path}$fname"))
-+      if(!(open LOG,"< $config{log_path}/$fname"))
-       {
-               print "No history file for $uin\n";
-               return;
diff -r 0cffdc02c8a4 -r f40989663007 chat/vicq/patches/patch-ac
--- a/chat/vicq/patches/patch-ac        Wed Jan 08 14:19:43 2020 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,12 +0,0 @@
-$NetBSD: patch-ac,v 1.3 2013/06/12 12:11:49 wiz Exp $
-
---- Net/vICQ/install.sh.orig   2002-04-09 12:32:33.000000000 -0400
-+++ Net/vICQ/install.sh
-@@ -1,6 +1,6 @@
- #!/bin/sh
- 
--output=`perl Makefile.PL 2>&1`;
-+output=`perl Makefile.PL INSTALLDIRS=vendor 2>&1`;
- if [ $? != 0 ]; then
-       echo  "Command: [perl Makefile.PL]"
-       echo  "$output";



Home | Main Index | Thread Index | Old Index