[pkgsrc/trunk]: pkgsrc/mail/fetchmail fetchmail: update to 6.4.1

To: pkgsrc-changes-hg%NetBSD.org@localhost
Subject: [pkgsrc/trunk]: pkgsrc/mail/fetchmail fetchmail: update to 6.4.1
From: triaxx <triaxx%pkgsrc.org@localhost>
Date: Wed, 01 Jan 2020 21:31:53 +0000
details:   https://anonhg.NetBSD.org/pkgsrc/rev/4215a8da9a74
branches:  trunk
changeset: 346576:4215a8da9a74
user:      triaxx <triaxx%pkgsrc.org@localhost>
date:      Wed Jan 01 20:36:53 2020 +0000

description:
fetchmail: update to 6.4.1

upstream cheanges:
------------------
fetchmail-6.4.1 (released 2019-09-28, 27473 LoC):

## REGRESSION FIXES:
* The bug fix Debian Bug#941129 was incomplete and caused
  + a regression in the default file locations, so that fetchmail was no longer
    able to find its configuration files in some situations.
    Reported by Cy Schubert.
  + a regression under _FORTIFY_SOURCE where PATH_MAX > minimal _POSIX_PATH_MAX.

--------------------------------------------------------------------------------

fetchmail 6.4.0 (released 2019-09-27, 27429 LoC):

# NOTE THAT FETCHMAIL IS NO LONGER PUBLISHED THROUGH IBIBLIO.
* They have stopped accepting submissions and consider themselves an archive.

## SECURITY FIXES THAT AFFECT BEHAVIOUR AND MAY REQUIRE RECONFIGURATION
* Fetchmail no longer supports SSLv2.

* Fetchmail no longer attempts to negotiate SSLv3 by default,
  even with --sslproto ssl23. Fetchmail can now use SSLv3, or TLSv1.1 or a newer
  TLS version, with STLS/STARTTLS (it would previously force TLSv1.0 with
  STARTTLS).  If the OpenSSL version used at build and run-time supports these
  versions, --sslproto ssl3 and --sslproto ssl3+ can be used to re-enable SSLv3.
  Doing so is discouraged because the SSLv3 protocol is broken.

  Along the lines suggested - as patch - by Kurt Roeckx, Debian Bug #768843.

  While this change is supposed to be compatible with common configurations,
  users may have to and are advised to change all explicit --sslproto ssl2
  (change to newer protocols required), --sslproto ssl3, --sslproto tls1 to
  --sslproto auto, so that they can benefit from TLSv1.1 and TLSv1.2 where
  supported by the server.

  The --sslproto option now understands the values auto, ssl3+, tls1+, tls1.1,
  tls1.1+, tls1.2, tls1.2+, tls1.3, tls1.3+ (case insensitively), see CHANGES
  below for details.

* Fetchmail defaults to --sslcertck behaviour. A new option --nosslcertck to
  override this has been added, but may be removed in future fetchmail versions
  in favour of another configuration option that makes the insecurity in using
  this option clearer.

## SECURITY FIXES
* Fetchmail prevents buffer overruns in GSSAPI authentication with user names
  beyond c. 6000 characters in length. Reported by Greg Hudson.

## CHANGED REQUIREMENTS
* fetchmail 6.4.0 is written in C99 and requires a SUSv3 (Single Unix
  Specification v3, a superset of POSIX.1-2001 aka. IEEE Std 1003.1-2001 with
  XSI extension) compliant system. For now, a C89 compiler should also work
  if the system is SUSv3 compliant.

  In particular, older fetchmail versions had workaround for several functions
  standardized in the Single Unix Specification v3, these have been removed.

  The trio/ library has been removed from the distribution.

## CHANGES
* fetchmail 6.3.X is unsupported.
* fetchmail now configures OpenSSL support by default.
* fetchmail now requires OpenSSL v1.0.2 or newer.
* Fetchmail now supports --sslproto auto and --sslproto tls1+ (same as ssl23).
* --sslproto tls1.1+, tls1.2+, and tls1.3+ are now supported for
  auto-negotiation with a minimum specified TLS protocol version, and --sslproto
  tls1.1, --sslproto tls1.2 and --sslproto tls1.3 to force the specified TLS
  protocol version. Note that tls1.3 requires OpenSSL v1.1.1 or newer.
* Fetchmail now detects if the server hangs up prematurely during SSL_connect()
  and reports this condition as such, and not just as SSL connection failure.
  (OpenSSL 1.0.2 reported incompatible with pop3.live.com by Jerry Seibert).
* A foreground fetchmail can now accept a few more options while another copy is
  running in the background.
* fetchmail now handles POP3 --keep UID lists more efficiently, by using Rainer
  Weikusat's P-Tree implementation. This reduces the complexity for handling
  a large UIDL from O(n^2) to O(n log n) and becomes noticably faster with
  thousands of kept messages.
  (IMAP does not currently track UIDs and is unaffected.)
  At the same time, the UIDL emulation code for deficient servers has been
  removed. It never worked really well.  Servers that do not implement the
  optional UIDL command only work with --fetchall option set, which in itself is
  incompatible with the --keep option (it would cause message duplication).
* fetchmail, when setting up TLS connections, now uses SSL_set_tlsext_host_name()
  to set up the SNI (Server Name Indication). Some servers (for instance
  googlemail) require SNI when using newer SSL protocols.
* Fetchmail now sets the expected hostname through OpenSSL 1.0.2's new
  X509_VERIFY_PARAM_set1_host() function to enable OpenSSL's native certificate
  verification features.
* fetchmail will drop the connection when fetching with IMAP and receiving an
  unexpected untagged "* BYE" response, to work around certain faulty servers.
* The FETCHMAIL_POP3_FORCE_RETR environment variable is now documented,
  it forces fetchmail, when talking POP3, to always use the RETR command,
  even if it would otherwise use the TOP command.
* Fetchmail's configure stage will try to query pkg-config or pkgconf for libssl
  and libcrypto, in case other system use .pc files to document specific library
  dependencies. (contributed by Fabrice Fontaine, GitLab merge request !14.)
* The gethostbyname() API calls and compatibility functions have been removed.
* These translations are shipped but not installed by default because
  they have less than 500 translated messages out of 714: el fi gl pt_BR sk tr
  -> Greek, Finnish, Galician, Brazilian Portuguese, Slovak, Turkish.
* Fetchmail now refuses delivery if the MDA option contains single-quoted
  expansions.

## FIXES
* Fix a typo in the FAQ. Submitted by David Lawyer, Debian Bug#706776.
* Do not translate header tags such as "Subject:".  Reported by Gonzalo P?rez de
  Olaguer C?rdoba, Debian Bug#744907.
* Convert most links from berlios.de to sourceforge.net.
* Report error to stderr, and exit, if --idle is combined with multiple
  accounts.
* Point to --idle from GENERAL OPERATION to clarify --idle and multiple
  mailboxes do not mix.  In response to Jeremy Chadwick's trouble 2014-11-19,
  fetchmail-users mailing list.
* Fix SSL-enabled build on systems that do not declare SSLv3_client_method(),
  or that #define OPENSSL_NO_SSL3 inside #include <openssl/ssl.h>
  Related to Debian Bug#775255. Fixes Debian Bug #804604.
* Version report lists -SSLv3 on SSL-enabled no-ssl3 builds.
* Fetchmail no longer adds a NUL byte to the username in GSSAPI authentication.
  This was reported to break Kerberos-based authentication with Microsoft
  Exchange 2013 by Greg Hudson.
* Set umask properly before writing the .fetchids file, to avoid failing the
  security check on the next run.  Reported by Fabian Raab,
  Fixes Debian Bug#831611.
* When forwarding by LMTP, also check antispam response code when collecting
  the responses after the CR LF . CR LF sequence at the end of the DATA phase.
  (Contributed by Evil.2000, GitLab merge request !12.)
* fetchmail will not try other protocols after a socket error. This avoids
  mismatches of how different prococols see messages as "seen" and re-fetches
  of known mail.  (Fix contributed by Lauri Nurmi, GitLab Merge Request !10.)
* fetchmail no longer reports "System error during SSL_connect(): Success."
  Fixes Debian Bug#928916, reported by Paul Kimoto.
* fetchmailconf would ignore Edit or Delete actions on the first (topmost)
  item in a list (no matter if server list, user list, ...).
* The mimedecode feature now properly detects multipart/mixed-type matches, so
  that quoted-printable-encoded multipart messages can get decoded.
  (Regression in 5.0.0 on 1999-03-27, as a side effect of a PGP-mimedecode fix
  attributed to Henrik Storner.)
* FETCHMAILHOME can now safely be a relative path, which will be qualified
  through realpath(). Previously, it had to be absolute in daemon mode.
  Reported by Alex Andreotti, Debian Bug#941129.

diffstat:

 mail/fetchmail/Makefile                  |   4 ++--
 mail/fetchmail/PLIST                     |   8 +-------
 mail/fetchmail/distinfo                  |  13 ++++++-------
 mail/fetchmail/patches/patch-Makefile.in |  10 +++++-----
 mail/fetchmail/patches/patch-socket.c    |  17 -----------------
 5 files changed, 14 insertions(+), 38 deletions(-)

diffs (107 lines):

diff -r eea998797072 -r 4215a8da9a74 mail/fetchmail/Makefile
--- a/mail/fetchmail/Makefile   Wed Jan 01 18:34:55 2020 +0000
+++ b/mail/fetchmail/Makefile   Wed Jan 01 20:36:53 2020 +0000
@@ -1,7 +1,7 @@
-# $NetBSD: Makefile,v 1.190 2019/11/09 11:32:14 nia Exp $
+# $NetBSD: Makefile,v 1.191 2020/01/01 20:36:53 triaxx Exp $
 
 # Note to updaters: mail/fetchmailconf reaches over here, make sure it builds.
-DISTNAME=      fetchmail-6.3.26
+DISTNAME=      fetchmail-6.4.1
 CATEGORIES=    mail
 MASTER_SITES=  ${MASTER_SITE_SOURCEFORGE:=fetchmail/}
 EXTRACT_SUFX=  .tar.xz
diff -r eea998797072 -r 4215a8da9a74 mail/fetchmail/PLIST
--- a/mail/fetchmail/PLIST      Wed Jan 01 18:34:55 2020 +0000
+++ b/mail/fetchmail/PLIST      Wed Jan 01 20:36:53 2020 +0000
@@ -1,4 +1,4 @@
-@comment $NetBSD: PLIST,v 1.16 2018/05/22 09:22:31 triaxx Exp $
+@comment $NetBSD: PLIST,v 1.17 2020/01/01 20:36:53 triaxx Exp $
 bin/fetchmail
 man/man1/fetchmail.1
 share/doc/fetchmail/COPYING
@@ -13,23 +13,17 @@
 share/locale/cs/LC_MESSAGES/fetchmail.mo
 share/locale/da/LC_MESSAGES/fetchmail.mo
 share/locale/de/LC_MESSAGES/fetchmail.mo
-share/locale/el/LC_MESSAGES/fetchmail.mo
 share/locale/en_GB/LC_MESSAGES/fetchmail.mo
 share/locale/eo/LC_MESSAGES/fetchmail.mo
 share/locale/es/LC_MESSAGES/fetchmail.mo
-share/locale/fi/LC_MESSAGES/fetchmail.mo
 share/locale/fr/LC_MESSAGES/fetchmail.mo
-share/locale/gl/LC_MESSAGES/fetchmail.mo
 share/locale/id/LC_MESSAGES/fetchmail.mo
 share/locale/it/LC_MESSAGES/fetchmail.mo
 share/locale/ja/LC_MESSAGES/fetchmail.mo
 share/locale/nl/LC_MESSAGES/fetchmail.mo
 share/locale/pl/LC_MESSAGES/fetchmail.mo
-share/locale/pt_BR/LC_MESSAGES/fetchmail.mo
 share/locale/ru/LC_MESSAGES/fetchmail.mo
-share/locale/sk/LC_MESSAGES/fetchmail.mo
 share/locale/sq/LC_MESSAGES/fetchmail.mo
 share/locale/sv/LC_MESSAGES/fetchmail.mo
-share/locale/tr/LC_MESSAGES/fetchmail.mo
 share/locale/vi/LC_MESSAGES/fetchmail.mo
 share/locale/zh_CN/LC_MESSAGES/fetchmail.mo
diff -r eea998797072 -r 4215a8da9a74 mail/fetchmail/distinfo
--- a/mail/fetchmail/distinfo   Wed Jan 01 18:34:55 2020 +0000
+++ b/mail/fetchmail/distinfo   Wed Jan 01 20:36:53 2020 +0000
@@ -1,8 +1,7 @@
-$NetBSD: distinfo,v 1.51 2018/05/22 09:22:31 triaxx Exp $
+$NetBSD: distinfo,v 1.52 2020/01/01 20:36:53 triaxx Exp $
 
-SHA1 (fetchmail-6.3.26.tar.xz) = de8dbe62a8edfa232ee4278257a1fe67aa1c797a
-RMD160 (fetchmail-6.3.26.tar.xz) = ce9a54b6d11da4c5e042c760284f8b3c6ac5a4ff
-SHA512 (fetchmail-6.3.26.tar.xz) = 8e0a2484e60eaf6c0231e2599e10fec6d207fa1c0fa02ec99b3ef9aea00b6d87275434e79470a25f06e358cdd4a293f9c46a82dd128fe733a99c85144e6caa63
-Size (fetchmail-6.3.26.tar.xz) = 1283816 bytes
-SHA1 (patch-Makefile.in) = c08ef115550f004496481e610140d7d2391016b2
-SHA1 (patch-socket.c) = 3d51ef4ffa6d721889d08ee04fc78b1b77715989
+SHA1 (fetchmail-6.4.1.tar.xz) = 1aadf078ed8fb1b6c93e9126cc0375b1f740301a
+RMD160 (fetchmail-6.4.1.tar.xz) = 753d982f132cd5dcedb261631b5bee653410fef9
+SHA512 (fetchmail-6.4.1.tar.xz) = 940b8df52f963f71537962ebe2b2cb88298fd2b54ca79932e5c974abe850f0b59cdc4919d606ee4f210e82d1e0a6f090ea87f1d3bdea18b531d4fbb36f7f9ea0
+Size (fetchmail-6.4.1.tar.xz) = 1257488 bytes
+SHA1 (patch-Makefile.in) = 9cd2053a7c8bbbf6f71fcee03e33c0d29d235c4e
diff -r eea998797072 -r 4215a8da9a74 mail/fetchmail/patches/patch-Makefile.in
--- a/mail/fetchmail/patches/patch-Makefile.in  Wed Jan 01 18:34:55 2020 +0000
+++ b/mail/fetchmail/patches/patch-Makefile.in  Wed Jan 01 20:36:53 2020 +0000
@@ -1,13 +1,13 @@
-$NetBSD: patch-Makefile.in,v 1.2 2012/11/04 18:41:47 morr Exp $
+$NetBSD: patch-Makefile.in,v 1.3 2020/01/01 20:36:53 triaxx Exp $
 
 Even with disabled python, wrapper around fetchmailconf.py and its
 manpage is installed.
 
---- Makefile.in.orig   2012-08-29 21:25:11.000000000 +0000
+--- Makefile.in.orig   2019-09-28 10:37:51.000000000 +0000
 +++ Makefile.in
-@@ -448,10 +448,10 @@ ACLOCAL_AMFLAGS = -I m4 -I m4-local
- AM_YFLAGS = -d
- BUILT_SOURCES = rcfile_y.h
+@@ -793,10 +793,10 @@ AM_YFLAGS = -d
+ # without building a few dozen other files first.
+ BUILT_SOURCES = rcfile_y.h socket.$(OBJEXT)
  dist_noinst_SCRIPTS = specgen.sh
 -dist_man1_MANS = fetchmail.man $(pym)
 +dist_man1_MANS = fetchmail.man
diff -r eea998797072 -r 4215a8da9a74 mail/fetchmail/patches/patch-socket.c
--- a/mail/fetchmail/patches/patch-socket.c     Wed Jan 01 18:34:55 2020 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,17 +0,0 @@
-$NetBSD: patch-socket.c,v 1.1 2018/02/20 13:19:39 wiz Exp $
-
-Fix build with openssl-1.1.
-
---- socket.c.orig      2012-08-13 20:02:41.000000000 +0000
-+++ socket.c
-@@ -880,8 +880,10 @@ int SSLOpen(int sock, char *mycert, char
-                       report(stderr, GT_("Your operating system does not support SSLv2.\n"));
-                       return -1;
- #endif
-+#if defined(SSLv3_client_method)
-               } else if(!strcasecmp("ssl3",myproto)) {
-                       _ctx[sock] = SSL_CTX_new(SSLv3_client_method());
-+#endif
-               } else if(!strcasecmp("tls1",myproto)) {
-                       _ctx[sock] = SSL_CTX_new(TLSv1_client_method());
-               } else if (!strcasecmp("ssl23",myproto)) {
Prev by Date: [pkgsrc/trunk]: pkgsrc/sysutils/py-borgbackup py-borgbackup: Fix typo.
Next by Date: [pkgsrc/trunk]: pkgsrc/devel/meson meson: add test target
Previous by Thread: [pkgsrc/trunk]: pkgsrc/sysutils/py-borgbackup py-borgbackup: Fix typo.
Next by Thread: [pkgsrc/trunk]: pkgsrc/devel/meson meson: add test target
Indexes:
Home | Main Index | Thread Index | Old Index