pkg/40590: pkg_add hangs in ftpclose, usually after adding all the dependencies and registering the final package

[peter%syllopsium.com@localhost]

>Number:         40590
>Category:       pkg
>Synopsis:       pkg_add hangs in ftpclose, usually after adding all the 
>dependencies and registering the final package
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    pkg-manager
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Feb 09 12:10:00 +0000 2009
>Originator:     Peter Kay
>Release:        5.0RC1
>Organization:
>Environment:
NetBSD hague.syllopsium.com 5.0_RC1 NetBSD 5.0_RC1 (GENERIC) #0: Wed Jan 28 
10:59:04 PST 2009  
builds@wb25:/home/builds/ab/netbsd-5/i386/200901280002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
 i386

>Description:
When using pkg_add to add many packages, but particularly pidgin-2.5.3, the 
pkg_add hangs at the ftpclose. Each FTP command then takes about half an hour 
to timeout.

FTP works outside pkg_add. The host machine - a repurposed Neostation 3000 thin 
client, is a bit odd, particularly with regards to interrupts - but normal FTP 
is as mentioned, working fine.

dmesg for completeness sake :

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_RC1 (GENERIC) #0: Wed Jan 28 10:59:04 PST 2009
        
builds@wb25:/home/builds/ab/netbsd-5/i386/200901280002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
total memory = 123 MB
avail memory = 109 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
    ( )
mainbus0 (root)
ACPI Error (tbxfroot-0308): A valid RSDP was not found [20080321]
ACPI: unable to initialize ACPI tables: AE_NOT_FOUND
cpu0 at mainbus0: NS/Cyrix 586-class, id 0x540
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1078 product 0x0001 (rev. 0x00)
bktr0 at pci0 dev 7 function 0
bktr0: interrupting at irq 11
bktr0: Hauppauge Model 61295 B411
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, remote control.
vendor 0x109e product 0x0878 (miscellaneous multimedia, revision 0x02) at pci0 
dev 7 function 1 not configured
rtk0 at pci0 dev 15 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 10
rtk0: Ethernet address 00:e0:c5:c9:71:25
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 18 function 0
pcib0: vendor 0x1078 product 0x0100 (rev. 0x00)
vendor 0x1078 product 0x0101 (miscellaneous bridge) at pci0 dev 18 function 1 
not configured
geodeide0 at pci0 dev 18 function 2
geodeide0: AMD Geode CX5530 IDE controller (rev. 0x00)
geodeide0: bus-master DMA support present
geodeide0: primary channel wired to compatibility mode
geodeide0: primary channel interrupting at irq 14
atabus0 at geodeide0 channel 0
geodeide0: secondary channel wired to compatibility mode
geodeide0: secondary channel interrupting at irq 15
atabus1 at geodeide0 channel 1
vendor 0x1078 product 0x0103 (audio multimedia) at pci0 dev 18 function 3 not 
configured
vga1 at pci0 dev 18 function 4: vendor 0x1078 product 0x0104 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ohci0 at pci0 dev 19 function 0: vendor 0x0e11 product 0xa0f8 (rev. 0x06)
intr_establish: pic pic0 pin 15: can't share type 2 with 3
ohci0: couldn't establish interrupt at irq 15
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
wd0 at atabus0 drive 0: <CF Card>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(geodeide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 1 (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
geodeide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
geodeide0:0:0: bus-master DMA error: missing interrupt, status=0x30
wd0: transfer error, downgrading to PIO mode 4
wd0(geodeide0:0:0): using PIO mode 4
wd0d: DMA error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: soft error (corrected)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

>How-To-Repeat:
pkg_add -v pidgin-2.5.3.tgz
>Fix: