NetBSD-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
older Acer laptop and nvidia/nouveau G72 haning at boot - NetBSD 11
Hi All,
I have a troublesome older laptop which is stubborn with NetBSD - it was
almost 5 years ago with WiFi and especially video/GPU and still is.
For WiFi I was in contact with Marin, but then lost trace. It has fatal
firmware load errors, kind of works, but needs cleanup.
For GPU, I did a lot of work of debugging with Robert Swindells, but I
think none of it went upstream
I swapped HDD, installed Linux.. and it did work fair enough,
framebuffer console, X11 and WiFi. It was a test to get hardware info,
then stuck to it, but boring.
Years passed. It was running 9.x, swapped in old hard disk, upgraded
first to 10.2, repeated the error, then to 11.0 and still get the GPU error.
Maybe minor things changed, but the core is the same.
after nouveau0 detects G72, I get uvm_fault,, page fault and drop into
kernel debugger on netbsd:memset+0x25
Willing to dig this out, Robert, or others? Now it is against 11.0. I
hoped nouveau updates would have helped
I have another laptop with nvidia which I used as a comparison (slightly
newer G86 and anyway different CPU and mainboard manufacturer). It used
to work, but with 10.2 broke.
This is the dmesg where I disabled nouveau as you can see and yields a
booting system:
Riccardo
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021,
2022, 2023,
[ 1.000000] 2024, 2025, 2026
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 11.0 (GENERIC) #0: Thu Jul 30 15:23:12 UTC 2026
[ 1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
[ 1.000000] total memory = 3070 MB
[ 1.000000] avail memory = 2990 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] userconf: configure system autoconfiguration:
[ 1.000000] uc> disable nouveau
[ 1.000000] [ 455.000000] nouveau* disabled
[ 1.000000] uc> u^H ^Hquit
[ 1.000000] Continuing...
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000000F5AD0 000014 (v00 PTLTD )
[ 1.000004] ACPI: RSDT 0x00000000BFE94FA6 000058 (v01 ACRSYS
ACRPRDCT 06040000 INNA 00000000)
[ 1.000004] ACPI: FACP 0x00000000BFE9DC78 000074 (v01 INTEL CALISTGA
06040000 LOHR 0000005A)
[ 1.000004] ACPI: DSDT 0x00000000BFE96D43 006F35 (v01 INTEL CALISTGA
06040000 MSFT 0100000E)
[ 1.000004] ACPI: FACS 0x00000000BFE9EFC0 000040
[ 1.000004] ACPI: APIC 0x00000000BFE9DCEC 000068 (v01 INTEL CALISTGA
06040000 LOHR 0000005A)
[ 1.000004] ACPI: HPET 0x00000000BFE9DD54 000038 (v01 INTEL CALISTGA
06040000 LOHR 0000005A)
[ 1.000004] ACPI: MCFG 0x00000000BFE9DD8C 00003C (v01 INTEL CALISTGA
06040000 LOHR 0000005A)
[ 1.000004] ACPI: TCPA 0x00000000BFE9DDC8 000032 (v01 PTLTD CALISTGA
06040000 PTL 00000001)
[ 1.000004] ACPI: SLIC 0x00000000BFE9DDFA 000176 (v01 ACRSYS
ACRPRDCT 06040000 ANNI 00000001)
[ 1.000004] ACPI: APIC 0x00000000BFE9DF70 000068 (v01 PTLTD ?
APIC 06040000 LTP 00000000)
[ 1.000004] ACPI: BOOT 0x00000000BFE9DFD8 000028 (v01 PTLTD $SBFTBL$
06040000 LTP 00000001)
[ 1.000004] ACPI: SSDT 0x00000000BFE966F4 00064F (v01 SataRe
SataPri 00001000 INTL 20050624)
[ 1.000004] ACPI: SSDT 0x00000000BFE96062 000692 (v01 SataRe
SataSec 00001000 INTL 20050624)
[ 1.000004] ACPI: SSDT 0x00000000BFE9558A 00025F (v01 PmRef Cpu0Tst
00003000 INTL 20050624)
[ 1.000004] ACPI: SSDT 0x00000000BFE954E4 0000A6 (v01 PmRef Cpu1Tst
00003000 INTL 20050624)
[ 1.000004] ACPI: SSDT 0x00000000BFE94FFE 0004E6 (v01 PmRef CpuPm
00003000 INTL 20050624)
[ 1.000004] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20,
24 pins
[ 1.000004] ioapic1 at mainbus0 apid 2: pa
0xfec28000autoconfiguration error: : failed to read version/size
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: Genuine Intel(R) CPU T2250 @ 1.73GHz,
id 0x6e8
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 1
[ 1.000004] cpu1: Genuine Intel(R) CPU T2250 @ 1.73GHz,
id 0x6e8
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20241212
[ 1.000004] acpi0: X/RSDT: OemId <ACRSYS,ACRPRDCT,06040000>, AslId
<INNA,00000000>
[ 1.000004] acpi0: MCFG: segment 0, bus 0-255, address
0x00000000e0000000
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0x00000000C5112944 00023D (v01 PmRef Cpu0Ist
00003000 INTL 20050624)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0x00000000C54B8004 0004FA (v01 PmRef Cpu0Cst
00003001 INTL 20050624)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0x00000000C5473904 0000BD (v01 PmRef Cpu1Ist
00003000 INTL 20050624)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0x00000000C549A7C4 000085 (v01 PmRef Cpu1Cst
00003000 INTL 20050624)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Safe" frequency 3579545
Hz quality 900
[ 1.027607] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1.027607] timecounter: Timecounter "hpet0" frequency 14318180 Hz
quality 2000
[ 1.027931] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[ 1.027931] acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
[ 1.027931] acpiwmibus at acpiwmi0 not configured
[ 1.027931] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1.027931] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.027931] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[ 1.027931] acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output
Device
[ 1.027931] acpiout1 at acpivga0 (LCD, 0x0118): ACPI Display Output
Device
[ 1.027931] acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output
Device
[ 1.027931] acpiout3 at acpivga0 (DVI, 0x0120): ACPI Display Output
Device
[ 1.027931] acpivga0: connected output devices:
[ 1.027931] acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0,
bios detect
[ 1.027931] acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
[ 1.027931] acpivga0: 0x0118 (acpiout1): Unknown Output Device,
head 0, bios detect
[ 1.027931] acpivga0: 0x0120 (acpiout3): Unknown Output Device,
head 0, bios detect
[ 1.027931] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
[ 1.027931] acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
[ 1.027931] FWHD (INT0800) at acpi0 not configured
[ 1.027931] MATH (PNP0C04) at acpi0 not configured
[ 1.027931] attimer1 at acpi0 (TIMR, PNP0100): io
0x40-0x43,0x50-0x53 irq 0
[ 1.027931] pckbc1 at acpi0 (KBD0, PNP0303) (kbd port): io 0x60,0x64
irq 1
[ 1.027931] pckbc2 at acpi0 (PS2M, SYN0302) (aux port): irq 12
[ 1.027931] acpitz0 at acpi0 (TZS0)
[ 1.027931] acpitz0: levels: critical 98.0 C, passive cooling
[ 1.027931] acpitz1 at acpi0 (TZS1)
[ 1.027931] acpitz1: levels: critical 111.0 C, passive cooling
[ 1.027931] apm0 at acpi0: Power Management spec V1.2
[ 1.027931] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 1.027931] pckbd0 at pckbc1 (kbd slot)
[ 1.027931] pckbc1: using irq 1 for kbd slot
[ 1.027931] wskbd0 at pckbd0: console keyboard
[ 1.027931] pms0 at pckbc1 (aux slot)
[ 1.027931] pms0: Synaptics touchpad version 6.2
[ 1.027931] pms0: Up/down buttons, Palm detect, Multi-finger
[ 1.027931] pckbc1: using irq 12 for aux slot
[ 1.027931] wsmouse0 at pms0 mux 0
[ 1.027931] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.027931] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1.027931] pchb0 at pci0 dev 0 function 0: Intel 82945GM/PM/GMS
Host Bridge (rev. 0x03)
[ 1.027931] agp0 at pchb0autoconfiguration error: : can't find
internal VGA config space
[ 1.027931] ppb0 at pci0 dev 1 function 0: Intel product 27a1 (rev.
0x03)
[ 1.027931] ppb0: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x16 @ 2.5GT/s
[ 1.027931] pci1 at ppb0 bus 1
[ 1.027931] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.027931] vga0 at pci1 dev 0 function 0: NVIDIA product 01d7 (rev.
0xa1)
[ 1.027931] vga0: autoconfiguration error: WARNING: ignoring 64-bit
BAR @ 0x14
[ 1.027931] vga0: autoconfiguration error: WARNING: ignoring 64-bit
BAR @ 0x1c
[ 1.027931] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100
emulation), using wskbd0
[ 1.027931] wsmux1: connecting to wsdisplay0
[ 1.027931] drm at vga0 not configured
[ 1.027931] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[ 1.027931] hdaudio0: interrupting at msi0 vec 0
[ 1.027931] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.027931] hdafg0 at hdaudio0: Realtek ALC883
[ 1.027931] hdafg0: DAC00 2ch: Speaker [Jack]
[ 1.027931] hdafg0: DIG01 2ch: SPDIF Out [Jack]
[ 1.027931] hdafg0: ADC02 2ch: Line In [Jack] [Built-In], Mic In [Jack]
[ 1.027931] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16
PCM20 PCM24 AC3
[ 1.027931] audio0 at hdafg0: playback, capture, full duplex,
independent
[ 1.027931] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[ 1.027931] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[ 1.027931] hdvsmfg at hdaudio0 not configured
[ 1.027931] ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI
Express Port #1 (rev. 0x02)
[ 1.027931] ppb1: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.027931] pci2 at ppb1 bus 2
[ 1.027931] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.027931] re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe
Gigabit Ethernet (rev. 0x01)
[ 1.027931] re0: interrupting at msi1 vec 0
[ 1.027931] re0: RTL8168 2 (0x3800)
[ 1.027931] re0: Ethernet address 00:0a:e4:fe:9c:27
[ 1.027931] re0: using 256 tx descriptors
[ 1.027931] rgephy0 at re0 phy 7: RTL8211B 1000BASE-T media interface
[ 1.027931] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-FDX, auto
[ 1.027931] ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI
Express Port #2 (rev. 0x02)
[ 1.027931] ppb2: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.027931] pci3 at ppb2 bus 3
[ 1.027931] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.027931] ppb3 at pci0 dev 28 function 2: Intel 82801GB/GR PCI
Express Port #3 (rev. 0x02)
[ 1.027931] ppb3: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.027931] pci4 at ppb3 bus 5
[ 1.027931] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.027931] wpi0 at pci4 dev 0 function 0: Intel PRO/Wireless LAN
3945ABG Mini-PCI Adapter (rev. 0x02)
[ 1.027931] wpi0: interrupting at msi2 vec 0
[ 1.027931] wpi0: MoW2, address 00:13:02:21:b0:e3
[ 1.027931] uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB
UHCI Controller (rev. 0x02)
[ 1.027931] uhci0: interrupting at ioapic0 pin 23
[ 1.027931] usb0 at uhci0: USB revision 1.0
[ 1.027931] uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB
UHCI Controller (rev. 0x02)
[ 1.027931] uhci1: interrupting at ioapic0 pin 19
[ 1.027931] usb1 at uhci1: USB revision 1.0
[ 1.027931] uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB
UHCI Controller (rev. 0x02)
[ 1.027931] uhci2: interrupting at ioapic0 pin 18
[ 1.027931] usb2 at uhci2: USB revision 1.0
[ 1.027931] uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB
UHCI Controller (rev. 0x02)
[ 1.027931] uhci3: interrupting at ioapic0 pin 16
[ 1.027931] usb3 at uhci3: USB revision 1.0
[ 1.027931] ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB
EHCI Controller (rev. 0x02)
[ 1.027931] ehci0: 64-bit DMA - limited
[ 1.027931] ehci0: interrupting at ioapic0 pin 23
[ 1.027931] ehci0: EHCI version 1.0
[ 1.027931] ehci0: 4 companion controllers, 2 ports each: uhci0
uhci1 uhci2 uhci3
[ 1.027931] ehci0: Using DMA subregion for control data structures
[ 1.027931] usb4 at ehci0: USB revision 2.0
[ 1.027931] ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI
Bridge (rev. 0xe2)
[ 1.027931] pci5 at ppb4 bus 10
[ 1.027931] pci5: i/o space, memory space enabled
[ 1.027931] cbb0 at pci5 dev 6 function 0: Texas Instruments PCIXX12
Cardbus Controller (rev. 0x00)
[ 1.027931] Texas Instruments PCIXX12 Integrated FlashMedia
Controller (miscellaneous mass storage) at pci5 dev 6 function 2 not
configured
[ 1.027931] sdhc0 at pci5 dev 6 function 3: Texas Instruments
PCIXX12 Secure Digital Host Controller (rev. 0x00)
[ 1.027931] sdhc0: interrupting at ioapic0 pin 22
[ 1.027931] sdhc0: SDHC 1.0, rev 137, caps <018030b0/00000000>, PIO,
48000 kHz, 3.3V, 512 byte blocks
[ 1.027931] sdmmc0 at sdhc0 slot 0
[ 1.027931] cbb0: autoconfiguration error: bad Vcc request.
sock_ctrl 0x200, sock_status 0x220
[ 1.027931] cbb0: autoconfiguration error: disabling socket
[ 1.027931] new status 0x220
[ 1.027931] cbb0: cacheline 0x10 lattimer 0x40
[ 1.027931] cbb0: bhlc 0x824010
[ 1.027931] cbb0: autoconfiguration error: secondary bus number
uninitialized; try PCI_BUS_FIXUP
[ 1.027931] cbb0: interrupting at ioapic0 pin 22
[ 1.027931] cardslot0 at cbb0
[ 1.027931] pcmcia0 at cardslot0
[ 1.027931] ichlpcib0 at pci0 dev 31 function 0: Intel 82801GBM LPC
Interface Bridge (rev. 0x02)
[ 1.027931] timecounter: Timecounter "ichlpcib0" frequency 3579545
Hz quality 1000
[ 1.027931] ichlpcib0: 24-bit timer
[ 1.027931] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.027931] tco0: autoconfiguration error: TCO timer reboot disabled
by hardware; hope SMBIOS properly handles it.
[ 1.027931] tco0: Min/Max interval 1/367 seconds
[ 1.027931] piixide0 at pci0 dev 31 function 2: Intel 82801GBM/GHM
Serial ATA Controller (ICH7) (rev. 0x02)
[ 1.027931] piixide0: bus-master DMA support present
[ 1.027931] piixide0: primary channel wired to compatibility mode
[ 1.027931] piixide0: primary channel interrupting at ioapic0 pin 14
[ 1.027931] atabus0 at piixide0 channel 0
[ 1.027931] piixide0: secondary channel wired to compatibility mode
[ 1.027931] piixide0: secondary channel interrupting at ioapic0 pin 15
[ 1.027931] atabus1 at piixide0 channel 1
[ 1.027931] ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR
SMBus Controller (rev. 0x02)
[ 1.027931] ichsmb0: interrupting at ioapic0 pin 19
[ 1.027931] iic0 at ichsmb0: I2C bus
[ 1.027931] isa0 at ichlpcib0
[ 1.027931] pcppi0 at isa0 port 0x61
[ 1.027931] midi0 at pcppi0: PC speaker
[ 1.027931] sysbeep0 at pcppi0
[ 1.027931] attimer1: attached to pcppi0
[ 1.027931] acpicpu0 at cpu0: ACPI CPU
[ 1.027931] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.027931] acpicpu0: C2: I/O, lat 1 us, pow 500 mW
[ 1.027931] acpicpu0: C3: I/O, lat 57 us, pow 100 mW
[ 1.027931] acpicpu0: P0: FFH, lat 10 us, pow 31000 mW, 1733 MHz
[ 1.027931] acpicpu0: P1: FFH, lat 10 us, pow 23000 mW, 1333 MHz
[ 1.027931] acpicpu0: P2: FFH, lat 10 us, pow 18000 mW, 1067 MHz
[ 1.027931] acpicpu0: P3: FFH, lat 10 us, pow 13000 mW, 800 MHz
[ 1.027931] acpicpu0: T0: FFH, lat 1 us, pow 13000 mW, 100 %
[ 1.027931] acpicpu0: T1: FFH, lat 1 us, pow 11375 mW, 88 %
[ 1.027931] acpicpu0: T2: FFH, lat 1 us, pow 9750 mW, 75 %
[ 1.027931] acpicpu0: T3: FFH, lat 1 us, pow 8125 mW, 63 %
[ 1.027931] acpicpu0: T4: FFH, lat 1 us, pow 6500 mW, 50 %
[ 1.027931] acpicpu0: T5: FFH, lat 1 us, pow 4875 mW, 38 %
[ 1.027931] acpicpu0: T6: FFH, lat 1 us, pow 3250 mW, 25 %
[ 1.027931] acpicpu0: T7: FFH, lat 1 us, pow 1625 mW, 13 %
[ 1.027931] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85
[ 1.027931] acpicpu1 at cpu1: ACPI CPU
[ 1.027931] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=85
[ 1.027931] WARNING: system needs entropy for security; see entropy(7)
[ 1.027931] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.284410] IPsec: Initialized Security Association Processing.
[ 1.294596] acpiacad0: AC adapter online.
[ 1.294596] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1.294596] uhub0: 2 ports with 2 removable, self powered
[ 1.294596] uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1.294596] uhub1: 2 ports with 2 removable, self powered
[ 1.294596] uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1.294596] uhub2: 2 ports with 2 removable, self powered
[ 1.294596] uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1.294596] uhub3: 2 ports with 2 removable, self powered
[ 1.294596] uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 1
[ 1.294596] uhub4: 8 ports with 8 removable, self powered
[ 1.374596] atapibus0 at atabus0: 2 targets
[ 1.384596] cd0 at atapibus0 drive 1: <Optiarc DVD RW AD-7560A,
30651250 2120461Q111, DS04> cdrom removable
[ 1.384596] cd0: 32-bit data port
[ 1.384596] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 2 (Ultra/33)
[ 1.384596] wd0 at atabus0 drive 0
[ 1.384596] wd0: <Hitachi HTS541612J9AT00>
[ 1.384596] wd0: drive supports 16-sector PIO transfers, LBA48
addressing
[ 1.384596] wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect
x 234441648 sectors
[ 1.464596] acpibat0: SANYO LION rechargeable battery
[ 1.464596] acpibat0: granularity: low->warn 0.000 Ah, warn->full
0.077 Ah
[ 1.874595] wd0: 32-bit data port
[ 1.874595] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 5 (Ultra/100), WRITE DMA FUA
[ 1.874595] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5
(Ultra/100) (using DMA), WRITE DMA FUA EXT
[ 1.874595] cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2
(Ultra/33) (using DMA)
[ 2.404595] ugen0 at uhub4 port 7
[ 2.404595] ugen0: OEM (0x046d) Camera (0x0892), rev 2.00/1.00, addr 2
[ 2.424595] swwdog0: software watchdog initialized
[ 2.484595] WARNING: 8 errors while detecting hardware; check system
log.
[ 2.484595] boot device: wd0
[ 2.484595] root on wd0a dumps on wd0b
[ 2.514595] root file system type: ffs
[ 2.514595] kern.module.path=/stand/i386/11.0/modules
[ 2.514595] WARNING: clock gained 2 days
[ 3.974596] entropy: best effort
[ 4.934595] entropy: ready
[ 18.844594] wsdisplay0: screen 1 added (80x25, vt100 emulation)
[ 18.844594] wsdisplay0: screen 2 added (80x25, vt100 emulation)
[ 18.854596] wsdisplay0: screen 3 added (80x25, vt100 emulation)
[ 18.854596] wsdisplay0: screen 4 added (80x25, vt100 emulation)
[ 23.324594] wpi0: autoconfiguration error: fatal firmware error
[ 31.304594] acpibat0: normal capacity on 'charge state'
Home |
Main Index |
Thread Index |
Old Index