NetBSD 11.x Full Test Report
============================
Date: Tue Aug 12 15:10:42 +01 2025
System Information:
-------------------
NetBSD san.local 11.0_BETA NetBSD 11.0_BETA (GENERIC) #0: Fri Aug 1 17:05:55 UTC 2025 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC amd64
CPU Info:
---------
machdep.cpu_brand = Intel(R) Core(TM) i5-4310M CPU @ 2.70GHz
Memory Info:
------------
hw.physmem = -1
hw.usermem = -1
hw.pagesize = 4096
Disk Info:
----------
Filesystem Size Used Avail %Cap Mounted on
/dev/wd0a 32G 3.3G 27G 10% /
tmpfs 2.0G 8.0K 2.0G 0% /tmp
kernfs 1.0K 1.0K 0B 100% /kern
ptyfs 1.0K 1.0K 0B 100% /dev/pts
procfs 4.0K 4.0K 0B 100% /proc
tmpfs 2.0G 0B 2.0G 0% /var/shm
/dev/wd0a on / type ffs (local)
tmpfs on /tmp type tmpfs (local)
kernfs on /kern type kernfs (local)
ptyfs on /dev/pts type ptyfs (local)
procfs on /proc type procfs (local)
tmpfs on /var/shm type tmpfs (local)
Filesystem Table (/etc/fstab):
------------------------------
# NetBSD /etc/fstab
# See /usr/share/examples/fstab/ for more examples.
/dev/wd0a / ffs rw 1 1
/dev/wd0b none swap sw,dp 0 0
tmpfs /tmp tmpfs rw,-m1777,-sram%25
kernfs /kern kernfs rw
ptyfs /dev/pts ptyfs rw
procfs /proc procfs rw
tmpfs /var/shm tmpfs rw,-m1777,-sram%25
Bootloader Config (/boot.cfg):
------------------------------
menu=Boot normally:rndseed /var/db/entropy-file;boot
menu=Boot single user:rndseed /var/db/entropy-file;boot -s
menu=Drop to boot prompt:prompt
default=1
timeout=5
clear=1
dmesg Output (first 40 lines):
------------------------------
at ioapic0 pin 18
[ 1.020077] iic0 at ichsmb0: I2C bus
[ 1.020077] isa0 at ichlpcib0
[ 1.020077] acpicpu0 at cpu0: ACPI CPU
[ 1.020077] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.020077] acpicpu0: C2: FFH, lat 148 us, pow 200 mW
[ 1.020077] acpicpu0: P0: FFH, lat 10 us, pow 37000 mW, 2701 MHz, turbo boost
[ 1.020077] acpicpu0: P1: FFH, lat 10 us, pow 37000 mW, 2700 MHz
[ 1.020077] acpicpu0: P2: FFH, lat 10 us, pow 35116 mW, 2600 MHz
[ 1.020077] acpicpu0: P3: FFH, lat 10 us, pow 31455 mW, 2400 MHz
[ 1.020077] acpicpu0: P4: FFH, lat 10 us, pow 30032 mW, 2300 MHz
[ 1.020077] acpicpu0: P5: FFH, lat 10 us, pow 28286 mW, 2200 MHz
[ 1.020077] acpicpu0: P6: FFH, lat 10 us, pow 25243 mW, 2000 MHz
[ 1.020077] acpicpu0: P7: FFH, lat 10 us, pow 23596 mW, 1900 MHz
[ 1.020077] acpicpu0: P8: FFH, lat 10 us, pow 20403 mW, 1700 MHz
[ 1.020077] acpicpu0: P9: FFH, lat 10 us, pow 19186 mW, 1600 MHz
[ 1.020077] acpicpu0: P10: FFH, lat 10 us, pow 17668 mW, 1500 MHz
[ 1.020077] acpicpu0: P11: FFH, lat 10 us, pow 15045 mW, 1300 MHz
[ 1.020077] acpicpu0: P12: FFH, lat 10 us, pow 13621 mW, 1200 MHz
[ 1.020077] acpicpu0: P13: FFH, lat 10 us, pow 12228 mW, 1100 MHz
[ 1.020077] acpicpu0: P14: FFH, lat 10 us, pow 9839 mW, 900 MHz
[ 1.020077] acpicpu0: P15: FFH, lat 10 us, pow 8537 mW, 800 MHz
[ 1.020077] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[ 1.020077] acpicpu1 at cpu1: ACPI CPU
[ 1.020077] acpicpu2 at cpu2: ACPI CPU
[ 1.020077] coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
[ 1.020077] acpicpu3 at cpu3: ACPI CPU
[ 1.020077] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.020077] timecounter: Timecounter "TSC" frequency 2693766000 Hz quality 3000
[ 1.646961] uhub0 at usb0acpiacad0: AC adapter online.
[ 1.646961] : NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.673811] uhub0: 4 ports with 4 removable, self powered
[ 1.673811] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.703811] uhub1: 14 ports with 14 removable, self powered
[ 1.703811] IPsec: Initialized Security Association Processing.
[ 1.723813] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.723813] uhub2: 3 ports with 3 removable, self powered
[ 1.723813] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.743811] tpm0: read 8 bytes, expected 10
[ 1.773811] uhub3: 3 ports with 3 removable, self powered
Networking:
-----------
wm0: flags=0x8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
capabilities=0x7ff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
capabilities=0x7ff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
capabilities=0x7ff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6>
enabled=0
ec_capabilities=0x17<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,EEE>
ec_enabled=0x2<VLAN_HWTAGGING>
address: c4:7d:46:15:11:95
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=0x8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33624
status: active
inet6 ::1/128 flags 0x20<NODAD>
inet6 fe80::1%lo0/64 flags 0 scopeid 0x2
inet 127.0.0.1/8 flags 0
iwm0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ssid gateway8 nwkey 65536:"",0x73f73b1f22d296c359a848258e7bfe9c,"",""
powersave off
bssid f6:9c:f4:21:f3:48 chan 11
address: ac:fd:ce:f1:63:fa
media: IEEE802.11 autoselect (OFDM54 mode 11g)
status: active
inet6 fe80::aefd:ceff:fef1:63fa%iwm0/64 flags 0 scopeid 0x3
inet 192.168.43.197/24 broadcast 192.168.43.255 flags 0
Default route:
default 192.168.43.152 UG - - - iwm0
Packages (pkgin):
-----------------
pkgin not configured
Installed X11 (if any):
------------------------
x11-links-1.36 Shadow tree of links to native X11 headers and libraries
Audio Devices:
--------------
0: [*] audio0 @ hdafg0: Intel HDMI/DP
playback: 16, 2ch, 48000Hz
record: unavailable
(P-) slinear_le 16/16, 2ch, { 48000 }
(P-) slinear_le 16/16, 4ch, { 48000 }
(P-) slinear_le 16/16, 6ch, { 48000 }
(P-) slinear_le 16/16, 8ch, { 48000 }
(PR) slinear_le 16/16, 2ch, 48000-48000Hz
1: [ ] audio1 @ hdafg1: Realtek product 0282
playback: 16, 2ch, 48000Hz
record: 16, 2ch, 48000Hz
(PR) slinear_le 16/16, 2ch, { 44100, 48000, 96000, 192000 }
(PR) slinear_le 20/32, 2ch, { 44100, 48000, 96000, 192000 }
(PR) slinear_le 24/32, 2ch, { 44100, 48000, 96000, 192000 }
( ) ac3 16/16, 2ch, { 44100, 48000, 96000, 192000 }
Power Management (Battery, AC):
-------------------------------
Current CritMax WarnMax WarnMin CritMin Unit
[acpiacad0]
connected: TRUE
[acpibat0]
present: FALSE
design voltage: N/A
voltage: N/A
design cap: N/A
last full cap: N/A
charge: N/A
charge rate: N/A
discharge rate: N/A
charging: N/A
charge state: N/A
[acpibat1]
present: FALSE
design voltage: N/A
voltage: N/A
design cap: N/A
last full cap: N/A
charge: N/A
charge rate: N/A
discharge rate: N/A
charging: N/A
charge state: N/A
[coretemp0]
cpu0 temperature: 68.000 degC
[coretemp1]
cpu2 temperature: 60.000 degC
Entropy Status:
---------------
kern.entropy.epoch = 481
kern.entropy.collection = 1
kern.entropy.depletion = 0
kern.entropy.consolidate = 0
kern.entropy.gather = 0
kern.entropy.needed = 0
kern.entropy.pending = 0
kern.entropy.samplesneeded = 0
kern.entropy.samplespending = 512
ACPI Warnings in dmesg:
------------------------
No ACPI warnings found
Suspicious Warnings or Errors:
------------------------------
No major errors detected
Veriexec Status:
----------------
Veriexec not available
rc.conf Services:
-----------------
rc_configured=YES
cgd=NO
raidframe=NO
xdm=YES
wscons=YES
sshd=NO
ntpdate=YES
ntpd=YES
dhcpcd=YES
dhcpcd_flags="-qM iwm0"
wpa_supplicant=YES
wpa_supplicant_flags="-B -s -i iwm0 -D bsd -c /etc/wpa_supplicant.conf"
hostname=netbsdworkstation
defaultroute=""
Xorg Log (/var/log/Xorg.0.log):
-------------------------------
--- First 40 lines ---
[ 68.428]
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[ 68.484] Current Operating System: NetBSD san.local 11.0_BETA NetBSD 11.0_BETA (GENERIC) #0: Fri Aug 1 17:05:55 UTC 2025 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[ 68.484]
[ 68.501] Current version of pixman: 0.46.4
[ 68.501] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 68.501] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 68.501] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 12 13:10:26 2025
[ 68.634] (II) Loader magic: 0x710780
[ 68.634] (II) Module ABI versions:
[ 68.634] X.Org ANSI C Emulation: 0.4
[ 68.634] X.Org Video Driver: 25.2
[ 68.634] X.Org XInput driver : 24.4
[ 68.634] X.Org Server Extension : 10.0
[ 68.739] (--) PCI:*(0@0:2:0) 8086:0416:10cf:17aa rev 6, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 68.783] (==) Using default built-in configuration (39 lines)
[ 68.783] (==) --- Start of built-in configuration ---
[ 68.783] Section "Device"
[ 68.783] Identifier "Builtin Default intel Device 0"
[ 68.783] Driver "intel"
[ 68.783] EndSection
[ 68.783] Section "Screen"
[ 68.783] Identifier "Builtin Default intel Screen 0"
[ 68.783] Device "Builtin Default intel Device 0"
[ 68.783] EndSection
[ 68.783] Section "Device"
[ 68.783] Identifier "Builtin Default modesetting Device 0"
[ 68.783] Driver "modesetting"
[ 68.783] EndSection
[ 68.783] Section "Screen"
[ 68.783] Identifier "Builtin Default modesetting Screen 0"
[ 68.783] Device "Builtin Default modesetting Device 0"
[ 68.783] EndSection
[ 68.783] Section "Device"
[ 68.783] Identifier "Builtin Default vesa Device 0"
[ 68.783] Driver "vesa"
--- Last 40 lines ---
[ 74.136] (II) LoadModule: "kbd"
[ 74.136] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 74.146] (II) Module kbd: vendor="X.Org Foundation"
[ 74.146] compiled for 1.21.1.18, module version = 2.0.0
[ 74.146] Module class: X.Org XInput Driver
[ 74.146] ABI class: X.Org XInput driver, version 24.4
[ 74.146] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 74.146] (**) /dev/wskbd: always reports core events
[ 74.146] (**) /dev/wskbd: always reports core events
[ 74.146] (**) Option "Protocol" "standard"
[ 74.146] (**) Option "XkbRules" "base"
[ 74.146] (**) Option "XkbModel" "pc105"
[ 74.146] (**) Option "XkbLayout" "us"
[ 74.146] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 74.500] (II) config/wscons: checking input device /dev/wsmouse
[ 74.500] (II) LoadModule: "ws"
[ 74.501] (II) Loading /usr/X11R7/lib/modules/drivers/ws_drv.so
[ 74.509] (II) Module ws: vendor="X.Org Foundation"
[ 74.509] compiled for 1.21.1.18, module version = 1.3.0
[ 74.509] Module class: X.Org XInput Driver
[ 74.509] ABI class: X.Org XInput driver, version 24.4
[ 74.509] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 74.509] (**) /dev/wsmouse: always reports core events
[ 74.509] (II) /dev/wsmouse: debuglevel 0
[ 74.509] (**) /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 74.509] (**) /dev/wsmouse associated screen: 0
[ 74.509] (**) Option "Device" "/dev/wsmouse"
[ 74.853] (II) /dev/wsmouse minimum x position: 0
[ 74.853] (II) /dev/wsmouse maximum x position: 1599
[ 74.853] (II) /dev/wsmouse minimum y position: 0
[ 74.853] (II) /dev/wsmouse maximum y position: 899
[ 74.854] (**) /dev/wsmouse: Buttons: 5
[ 74.865] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[ 75.212] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 75.212] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 75.213] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 75.213] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 75.224] (II) intel(0): EDID vendor "LGD", prod id 1020
[ 75.224] (II) intel(0): Printing DDC gathered Modelines:
[ 75.224] (II) intel(0): Modeline "1600x900"x0.0 98.00 1600 1648 1680 1764 900 902 907 926 -hsync -vsync (55.6 kHz eP)
Attachment:
dmesg.fujitsu-lifebook
Description: Binary data