Creating a GPT tab

[Brook Milligan <brook%nmsu.edu@localhost>]

I am trying to create GPT partitions that are the same as the following:

# fdisk sd0
fdisk: Cannot determine the number of heads
Disk: /dev/rsd0
NetBSD disklabel disk geometry:
cylinders: 118152, heads: 64, sectors/track: 32 (2048 sectors/cylinder)
total sectors: 241975296, bytes/sector: 512

BIOS disk geometry:
cylinders: 1023, heads: 255, sectors/track: 63 (16065 sectors/cylinder)
total sectors: 241975296

Partitions aligned to 2048 sector boundaries, offset 63

Partition table:
0: Primary DOS with 32 bit FAT - LBA (sysid 12)
    start 32768, size 163840 (80 MB, Cyls 2/10/9-12/60/48), Active
1: <UNUSED>
2: <UNUSED>
3: GPT Protective MBR (sysid 238)
    start 1, size 32767 (16 MB, Cyls 0/0/2-2/10/8)
        PBR is not bootable: Bad magic number (0x0000)
First active partition: 0
Drive serial number: 0 (0x00000000)

# gpt show sd0
      start       size  index  contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34      32734         Unused
      32768     163840      1  GPT part - Windows basic data
     196608   33554432      2  GPT part - NetBSD FFSv1/FFSv2
   33751040  207618048      3  GPT part - NetBSD FFSv1/FFSv2
  241369088     606175         Unused
  241975263         32         Sec GPT table
  241975295          1         Sec GPT header

The complicating factor is that there is an MBR in sector 0 and the primary GPT begins at sector 1.

I cannot figure out how to make the tools replicate this and would appreciate help.

Thank you very much.

Cheers,
Brook