NetBSD-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: cdrecord, no scsi, netbsd 9
Hi,
Thanks for the tip, but the problem seems to be more serious.
The CD/DVD is not found by NetBSD. It's an USB 2.0 CD/DVD/BD writer
and it is not even recognised as a CDROM.
What is strange however is that I am able to use it on some
others computers (Windows, Linux). Moreover, the
installation of the machine was done by using the CD writer (used
as a CD-Rom). It's true that for the installation, the CD writer was
found by the BIOS and not by NetBSD.
I have used a powered USB switch and connected the CD writer directly
to the computer (pcengines APU 4d4) without success.
dmesg indicates a strange error message and detach hub and device
while with the same configuration (USB hub
connected on the same host USB port) an USB key is found.
After further tests, I have noticed the following points:
* If the CD writer is connected after boot it is not
recognised and a strange error (about device configuration
error, see at the end of file) is written in dmesg file
* If the CD writer is connected at boot, it is recognised
by BIOS and then by Netbsd.
Any Idea?
best regards
On Thu, 2 Apr 2020 11:13:43 +0200
Manuel Bouyer <bouyer%antioche.eu.org@localhost> wrote:
> On Thu, Apr 02, 2020 at 09:54:21AM +0200, Pierre Dupond wrote:
> > Hi All,
> > I have installed cdrecord from the precompiled packages.
> > The machine is running Netbsd 9, minimal installation.
> >
> > When I try to detect an external USB 2.0 dvd burner it is not recognised
> > with a message indicating that the SCSI driver can not be used.
> >
> > Should I do something specific (to load a specific module or
> > to recompile a kernel) to use SCSI layer?
>
> Did you try cdrecord dev=/dev/rcd0d ?
> What does dmesg show about the CD drive ?
>
> --
> Manuel Bouyer <bouyer%antioche.eu.org@localhost>
> NetBSD: 26 ans d'experience feront toujours la difference
> --
--
GMX <76nemo76%gmx.ch@localhost>
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
[ 1.000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 4078 MB
[ 1.000000] avail memory = 3936 MB
[ 1.000000] rnd: seeded with 256 bits
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000003] PC Engines apu3 (1.0)
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x00000000000F3AF0 000024 (v02 COREv4)
[ 1.000003] ACPI: XSDT 0x00000000CFEA80E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: FACP 0x00000000CFEA9D70 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: DSDT 0x00000000CFEA8280 001AF0 (v02 COREv4 COREBOOT 00010001 INTL 20180531)
[ 1.000003] ACPI: FACS 0x00000000CFEA8240 000040
[ 1.000003] ACPI: SSDT 0x00000000CFEA9E70 00008A (v02 COREv4 COREBOOT 0000002A CORE 20180531)
[ 1.000003] ACPI: APIC 0x00000000CFEA9F00 00007E (v02 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: HEST 0x00000000CFEA9F80 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: IVRS 0x00000000CFEAA150 000118 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: SSDT 0x00000000CFEAA270 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 1.000003] ACPI: SSDT 0x00000000CFEAEB20 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 1.000003] ACPI: HPET 0x00000000CFEAF2F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 1.000003] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
[ 1.000003] ioapic1 at mainbus0 apid 5: pa 0xfec20000, version 0x21, 32 pins
[ 1.000003] cpu0 at mainbus0 apid 0
[ 1.000003] cpu0: AMD GX-412TC SOC , id 0x730f01
[ 1.000003] cpu0: package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 1
[ 1.000003] cpu1: AMD GX-412TC SOC , id 0x730f01
[ 1.000003] cpu1: package 0, core 1, smt 0
[ 1.000003] cpu2 at mainbus0 apid 2
[ 1.000003] cpu2: AMD GX-412TC SOC , id 0x730f01
[ 1.000003] cpu2: package 0, core 2, smt 0
[ 1.000003] cpu3 at mainbus0 apid 3
[ 1.000003] cpu3: AMD GX-412TC SOC , id 0x730f01
[ 1.000003] cpu3: package 0, core 3, smt 0
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[ 1.000003] acpi0: X/RSDT: OemId <COREv4,COREBOOT,00000000>, AslId <CORE,20180531>
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
[ 1.025285] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.025285] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.033106] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
[ 1.033106] LDRC (PNP0C02) at acpi0 not configured
[ 1.033106] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
[ 1.033106] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.033106] spkr0 at pcppi1: PC Speaker
[ 1.033106] wsbell at spkr0 not configured
[ 1.033106] midi0 at pcppi1: PC speaker
[ 1.033106] sysbeep0 at pcppi1
[ 1.033106] COM1 (PNP0501) at acpi0 not configured
[ 1.033106] COM2 (PNP0501) at acpi0 not configured
[ 1.033106] GPIO (AMD0030) at acpi0 not configured
[ 1.033106] BTNS (PRP0001) at acpi0 not configured
[ 1.033106] BTN1 (PRP0001) at acpi0 not configured
[ 1.033106] LEDS (PRP0001) at acpi0 not configured
[ 1.033106] LED1 (PRP0001) at acpi0 not configured
[ 1.033106] LED2 (PRP0001) at acpi0 not configured
[ 1.033106] LED3 (PRP0001) at acpi0 not configured
[ 1.033106] AWR0 (PNP0C02) at acpi0 not configured
[ 1.033106] ABR0 (PNP0C02) at acpi0 not configured
[ 1.033106] ABR1 (PNP0C02) at acpi0 not configured
[ 1.033106] ABR2 (PNP0C02) at acpi0 not configured
[ 1.033106] ABR3 (PNP0C02) at acpi0 not configured
[ 1.033106] ABR4 (PNP0C02) at acpi0 not configured
[ 1.033106] CTBL (BOOT0000) at acpi0 not configured
[ 1.033106] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 1.033106] attimer1: attached to pcppi1
[ 1.033106] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.033106] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.033106] pchb0 at pci0 dev 0 function 0: vendor 1022 product 1566 (rev. 0x00)
[ 1.033106] vendor 1022 product 1567 (IOMMU system) at pci0 dev 0 function 2 not configured
[ 1.033106] pchb1 at pci0 dev 2 function 0: vendor 1022 product 156b (rev. 0x00)
[ 1.033106] ppb0 at pci0 dev 2 function 1: vendor 1022 product 1439 (rev. 0x00)
[ 1.033106] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.033106] ppb0: link is x1 @ 2.5GT/s
[ 1.033106] pci1 at ppb0 bus 1
[ 1.033106] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.033106] wm0 at pci1 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.033106] wm0: for TX and RX interrupting at msix0 vec 0 affinity to 1
[ 1.033106] wm0: for TX and RX interrupting at msix0 vec 1 affinity to 2
[ 1.033106] wm0: for LINK interrupting at msix0 vec 2
[ 1.033106] wm0: PCI-Express bus
[ 1.033106] wm0: 64 words iNVM, version 0.6
[ 1.033106] wm0: Ethernet address 00:0d:b9:4e:88:10
[ 1.033106] wm0: Copper
[ 1.033106] wm0: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.033106] makphy0 at wm0 phy 1: I210 10/100/1000 media interface, rev. 0
[ 1.033106] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.033106] ppb1 at pci0 dev 2 function 2: vendor 1022 product 1439 (rev. 0x00)
[ 1.033106] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.033106] ppb1: link is x1 @ 2.5GT/s
[ 1.033106] pci2 at ppb1 bus 2
[ 1.033106] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.033106] wm1 at pci2 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.033106] wm1: for TX and RX interrupting at msix1 vec 0 affinity to 1
[ 1.033106] wm1: for TX and RX interrupting at msix1 vec 1 affinity to 2
[ 1.033106] wm1: for LINK interrupting at msix1 vec 2
[ 1.033106] wm1: PCI-Express bus
[ 1.033106] wm1: 64 words iNVM, version 0.6
[ 1.033106] wm1: Ethernet address 00:0d:b9:4e:88:11
[ 1.033106] wm1: Copper
[ 1.033106] wm1: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.033106] makphy1 at wm1 phy 1: I210 10/100/1000 media interface, rev. 0
[ 1.033106] makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.033106] ppb2 at pci0 dev 2 function 3: vendor 1022 product 1439 (rev. 0x00)
[ 1.033106] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.033106] ppb2: link is x1 @ 2.5GT/s
[ 1.033106] pci3 at ppb2 bus 3
[ 1.033106] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.033106] wm2 at pci3 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.033106] wm2: for TX and RX interrupting at msix2 vec 0 affinity to 1
[ 1.033106] wm2: for TX and RX interrupting at msix2 vec 1 affinity to 2
[ 1.033106] wm2: for LINK interrupting at msix2 vec 2
[ 1.033106] wm2: PCI-Express bus
[ 1.033106] wm2: 64 words iNVM, version 0.6
[ 1.033106] wm2: Ethernet address 00:0d:b9:4e:88:12
[ 1.033106] wm2: Copper
[ 1.033106] wm2: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.033106] makphy2 at wm2 phy 1: I210 10/100/1000 media interface, rev. 0
[ 1.033106] makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.033106] ppb3 at pci0 dev 2 function 4: vendor 1022 product 1439 (rev. 0x00)
[ 1.033106] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.033106] ppb3: link is x1 @ 2.5GT/s
[ 1.033106] pci4 at ppb3 bus 4
[ 1.033106] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.033106] wm3 at pci4 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.033106] wm3: for TX and RX interrupting at msix3 vec 0 affinity to 1
[ 1.033106] wm3: for TX and RX interrupting at msix3 vec 1 affinity to 2
[ 1.033106] wm3: for LINK interrupting at msix3 vec 2
[ 1.033106] wm3: PCI-Express bus
[ 1.033106] wm3: 64 words iNVM, version 0.6
[ 1.033106] wm3: Ethernet address 00:0d:b9:4e:88:13
[ 1.033106] wm3: Copper
[ 1.033106] wm3: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.033106] makphy3 at wm3 phy 1: I210 10/100/1000 media interface, rev. 0
[ 1.033106] makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.033106] vendor 1022 product 1537 (miscellaneous crypto) at pci0 dev 8 function 0 not configured
[ 1.033106] xhci0 at pci0 dev 16 function 0: vendor 1022 product 7814 (rev. 0x11)
[ 1.033106] xhci0: interrupting at msix4 vec 0
[ 1.033106] xhci0: xHCI version 1.0
[ 1.033106] usb0 at xhci0: USB revision 3.0
[ 1.033106] usb1 at xhci0: USB revision 2.0
[ 1.033106] ahcisata0 at pci0 dev 17 function 0: vendor 1022 product 7800 (rev. 0x39)
[ 1.033106] ahcisata0: 64-bit DMA
[ 1.033106] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf733ff81<CCCS,PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[ 1.033106] ahcisata0: interrupting at msi5 vec 0
[ 1.033106] atabus0 at ahcisata0 channel 0
[ 1.033106] atabus1 at ahcisata0 channel 1
[ 1.033106] ehci0 at pci0 dev 19 function 0: vendor 1022 product 7808 (rev. 0x39)
[ 1.033106] ehci0: interrupting at ioapic0 pin 18
[ 1.033106] ehci0: EHCI version 1.0
[ 1.033106] usb2 at ehci0: USB revision 2.0
[ 1.033106] piixpm0 at pci0 dev 20 function 0: vendor 1022 product 780b (rev. 0x42)
[ 1.033106] piixpm0: polling
[ 1.033106] iic0 at piixpm0 port 0: I2C bus
[ 1.033106] iic1 at piixpm0 port 1: I2C bus
[ 1.033106] iic2 at piixpm0 port 2: I2C bus
[ 1.033106] iic3 at piixpm0 port 3: I2C bus
[ 1.033106] pcib0 at pci0 dev 20 function 3: vendor 1022 product 780e (rev. 0x11)
[ 1.033106] sdhc0 at pci0 dev 20 function 7: vendor 1022 product 7813 (rev. 0x01)
[ 1.033106] sdhc0: interrupting at ioapic0 pin 16
[ 1.033106] sdhc0: SDHC 2.0, rev 16, SDMA, 50000 kHz, HS 3.3V, 2048 byte blocks
[ 1.033106] sdmmc0 at sdhc0 slot 0
[ 1.033106] pchb2 at pci0 dev 24 function 0: vendor 1022 product 1580 (rev. 0x00)
[ 1.033106] pchb3 at pci0 dev 24 function 1: vendor 1022 product 1581 (rev. 0x00)
[ 1.033106] pchb4 at pci0 dev 24 function 2: vendor 1022 product 1582 (rev. 0x00)
[ 1.033106] amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
[ 1.033106] amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family16h)
[ 1.033106] pchb5 at pci0 dev 24 function 4: vendor 1022 product 1584 (rev. 0x00)
[ 1.033106] pchb6 at pci0 dev 24 function 5: vendor 1022 product 1585 (rev. 0x00)
[ 1.033106] isa0 at pcib0
[ 1.033106] lpt0 at isa0 port 0x378-0x37b irq 7
[ 1.033106] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[ 1.033106] com0: console
[ 1.033106] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
[ 1.033106] acpicpu0 at cpu0: ACPI CPU
[ 1.033106] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.033106] acpicpu0: C2: I/O, lat 400 us, pow 0 mW
[ 1.033106] acpicpu0: P0: FFH, lat 4 us, pow 966 mW, 1000 MHz
[ 1.033106] acpicpu0: P1: FFH, lat 4 us, pow 795 mW, 800 MHz
[ 1.033106] acpicpu0: P2: FFH, lat 4 us, pow 600 mW, 600 MHz
[ 1.033106] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.033106] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.033106] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.033106] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.033106] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.033106] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.033106] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.033106] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.033106] acpicpu1 at cpu1: ACPI CPU
[ 1.033106] acpicpu2 at cpu2: ACPI CPU
[ 1.033106] acpicpu3 at cpu3: ACPI CPU
[ 1.033106] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.228563] timecounter: Timecounter "TSC" frequency 998197350 Hz quality 3000
[ 1.229258] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.229258] uhub0: 2 ports with 2 removable, self powered
[ 1.229258] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.240754] uhub1: 2 ports with 2 removable, self powered
[ 1.348607] uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.358612] uhub2: 2 ports with 2 removable, self powered
[ 1.358612] sdhc0: cmd timeout error
[ 1.388624] IPsec: Initialized Security Association Processing.
[ 1.388624] sdmmc0: SD card status: 4-bit, C10, U3
[ 1.399053] ld0 at sdmmc0: <0x1b:0x534d:EC2QT:0x30:0x814961cd:0x134>
[ 1.399053] ld0: 61056 MB, 7783 cyl, 255 head, 63 sec, 512 bytes/sect x 125042688 sectors
[ 1.408632] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 1.418635] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 2.869212] umass0 at uhub1 port 1 configuration 1 interface 0
[ 2.879243] umass0: vendor 058f (0x58f) product 6387 (0x6387), rev 2.00/1.00, addr 1
[ 2.889219] umass0: using SCSI over Bulk-Only
[ 2.889219] scsibus0 at umass0: 2 targets, 1 lun per target
[ 2.899223] sd0 at scsibus0 target 0 lun 0: <, , 8.07> disk removable
[ 2.899223] sd0: fabricating a geometry
[ 2.909228] sd0: 14800 MB, 14800 cyl, 64 head, 32 sec, 512 bytes/sect x 30310400 sectors
[ 2.919231] sd0: fabricating a geometry
[ 2.919231] sd0: GPT GUID: 3a52e035-4567-4d0e-9770-4611ad1eb388
[ 2.929235] dk0 at sd0: "9232cac1-82f9-484a-bba0-1163147295de", 1024000 blocks at 34, type: ffs
[ 2.929235] dk1 at sd0: "11f1e91b-a1a5-4bd6-866b-ef731937dd51", 29286333 blocks at 1024034, type: <unknown>
[ 2.949244] wd0 at atabus0 drive 0
[ 2.949244] wd0: <Samsung SSD 860 EVO mSATA 500GB>
[ 2.959250] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[ 2.959250] wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
[ 2.969251] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 2.969251] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.599501] uhub3 at uhub2 port 1: vendor 0438 (0x438) product 7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
[ 3.609534] uhub3: single transaction translator
[ 3.609534] uhub3: 4 ports with 4 removable, self powered
[ 3.799579] uhub4 at uhub1 port 2: vendor 1a40 (0x1a40) USB 2.0 Hub (0x101), class 9/0, rev 2.00/1.11, addr 2
[ 3.809613] uhub4: single transaction translator
[ 3.809613] uhub4: 4 ports with 4 removable, self powered
[ 4.820090] umass1 at uhub4 port 2 configuration 1 interface 0
[ 4.820090] umass1: MediaTek Inc (0xe8d) MT1956 (0x1956), rev 2.00/0.00, addr 3
[ 4.835319] umass1: using ATAPI over Bulk-Only
[ 4.835319] atapibus0 at umass1: 2 targets
[ 4.840763] cd0 at atapibus0 drive 0: <TSSTcorp, BDDVDW SE-506CB, TS02> cdrom removable
[ 4.910118] boot device: ld0
[ 4.910118] root on ld0a dumps on ld0b
[ 4.921613] root file system type: ffs
[ 4.931412] kern.module.path=/stand/amd64/9.0/modules
[ 5.850520] WARNING: ZFS on NetBSD is under development
[ 5.870567] ZFS filesystem version: 5
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
[ 1.000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 4078 MB
[ 1.000000] avail memory = 3936 MB
[ 1.000000] rnd: seeded with 256 bits
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000003] PC Engines apu3 (1.0)
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x00000000000F3AF0 000024 (v02 COREv4)
[ 1.000003] ACPI: XSDT 0x00000000CFEA80E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: FACP 0x00000000CFEA9D70 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: DSDT 0x00000000CFEA8280 001AF0 (v02 COREv4 COREBOOT 00010001 INTL 20180531)
[ 1.000003] ACPI: FACS 0x00000000CFEA8240 000040
[ 1.000003] ACPI: SSDT 0x00000000CFEA9E70 00008A (v02 COREv4 COREBOOT 0000002A CORE 20180531)
[ 1.000003] ACPI: APIC 0x00000000CFEA9F00 00007E (v02 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: HEST 0x00000000CFEA9F80 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: IVRS 0x00000000CFEAA150 000118 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: SSDT 0x00000000CFEAA270 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 1.000003] ACPI: SSDT 0x00000000CFEAEB20 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 1.000003] ACPI: HPET 0x00000000CFEAF2F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
[ 1.000003] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 1.000003] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
[ 1.000003] ioapic1 at mainbus0 apid 5: pa 0xfec20000, version 0x21, 32 pins
[ 1.000003] cpu0 at mainbus0 apid 0
[ 1.000003] cpu0: AMD GX-412TC SOC , id 0x730f01
[ 1.000003] cpu0: package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 1
[ 1.000003] cpu1: AMD GX-412TC SOC , id 0x730f01
[ 1.000003] cpu1: package 0, core 1, smt 0
[ 1.000003] cpu2 at mainbus0 apid 2
[ 1.000003] cpu2: AMD GX-412TC SOC , id 0x730f01
[ 1.000003] cpu2: package 0, core 2, smt 0
[ 1.000003] cpu3 at mainbus0 apid 3
[ 1.000003] cpu3: AMD GX-412TC SOC , id 0x730f01
[ 1.000003] cpu3: package 0, core 3, smt 0
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[ 1.000003] acpi0: X/RSDT: OemId <COREv4,COREBOOT,00000000>, AslId <CORE,20180531>
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
[ 1.025527] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.025527] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.033457] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
[ 1.033457] LDRC (PNP0C02) at acpi0 not configured
[ 1.033457] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
[ 1.033457] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.033457] spkr0 at pcppi1: PC Speaker
[ 1.033457] wsbell at spkr0 not configured
[ 1.033457] midi0 at pcppi1: PC speaker
[ 1.033457] sysbeep0 at pcppi1
[ 1.033457] COM1 (PNP0501) at acpi0 not configured
[ 1.033457] COM2 (PNP0501) at acpi0 not configured
[ 1.033457] GPIO (AMD0030) at acpi0 not configured
[ 1.033457] BTNS (PRP0001) at acpi0 not configured
[ 1.033457] BTN1 (PRP0001) at acpi0 not configured
[ 1.033457] LEDS (PRP0001) at acpi0 not configured
[ 1.033457] LED1 (PRP0001) at acpi0 not configured
[ 1.033457] LED2 (PRP0001) at acpi0 not configured
[ 1.033457] LED3 (PRP0001) at acpi0 not configured
[ 1.033457] AWR0 (PNP0C02) at acpi0 not configured
[ 1.033457] ABR0 (PNP0C02) at acpi0 not configured
[ 1.033457] ABR1 (PNP0C02) at acpi0 not configured
[ 1.033457] ABR2 (PNP0C02) at acpi0 not configured
[ 1.033457] ABR3 (PNP0C02) at acpi0 not configured
[ 1.033457] ABR4 (PNP0C02) at acpi0 not configured
[ 1.033457] CTBL (BOOT0000) at acpi0 not configured
[ 1.033457] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 1.033457] attimer1: attached to pcppi1
[ 1.033457] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.033457] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.033457] pchb0 at pci0 dev 0 function 0: vendor 1022 product 1566 (rev. 0x00)
[ 1.033457] vendor 1022 product 1567 (IOMMU system) at pci0 dev 0 function 2 not configured
[ 1.033457] pchb1 at pci0 dev 2 function 0: vendor 1022 product 156b (rev. 0x00)
[ 1.033457] ppb0 at pci0 dev 2 function 1: vendor 1022 product 1439 (rev. 0x00)
[ 1.033457] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.033457] ppb0: link is x1 @ 2.5GT/s
[ 1.033457] pci1 at ppb0 bus 1
[ 1.033457] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.033457] wm0 at pci1 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.033457] wm0: for TX and RX interrupting at msix0 vec 0 affinity to 1
[ 1.033457] wm0: for TX and RX interrupting at msix0 vec 1 affinity to 2
[ 1.033457] wm0: for LINK interrupting at msix0 vec 2
[ 1.033457] wm0: PCI-Express bus
[ 1.033457] wm0: 64 words iNVM, version 0.6
[ 1.033457] wm0: Ethernet address 00:0d:b9:4e:88:10
[ 1.033457] wm0: Copper
[ 1.033457] wm0: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.033457] makphy0 at wm0 phy 1: I210 10/100/1000 media interface, rev. 0
[ 1.033457] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.033457] ppb1 at pci0 dev 2 function 2: vendor 1022 product 1439 (rev. 0x00)
[ 1.033457] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.033457] ppb1: link is x1 @ 2.5GT/s
[ 1.033457] pci2 at ppb1 bus 2
[ 1.033457] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.033457] wm1 at pci2 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.033457] wm1: for TX and RX interrupting at msix1 vec 0 affinity to 1
[ 1.033457] wm1: for TX and RX interrupting at msix1 vec 1 affinity to 2
[ 1.033457] wm1: for LINK interrupting at msix1 vec 2
[ 1.033457] wm1: PCI-Express bus
[ 1.033457] wm1: 64 words iNVM, version 0.6
[ 1.033457] wm1: Ethernet address 00:0d:b9:4e:88:11
[ 1.033457] wm1: Copper
[ 1.033457] wm1: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.033457] makphy1 at wm1 phy 1: I210 10/100/1000 media interface, rev. 0
[ 1.033457] makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.033457] ppb2 at pci0 dev 2 function 3: vendor 1022 product 1439 (rev. 0x00)
[ 1.033457] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.033457] ppb2: link is x1 @ 2.5GT/s
[ 1.033457] pci3 at ppb2 bus 3
[ 1.033457] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.033457] wm2 at pci3 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.033457] wm2: for TX and RX interrupting at msix2 vec 0 affinity to 1
[ 1.033457] wm2: for TX and RX interrupting at msix2 vec 1 affinity to 2
[ 1.033457] wm2: for LINK interrupting at msix2 vec 2
[ 1.033457] wm2: PCI-Express bus
[ 1.033457] wm2: 64 words iNVM, version 0.6
[ 1.033457] wm2: Ethernet address 00:0d:b9:4e:88:12
[ 1.033457] wm2: Copper
[ 1.033457] wm2: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.033457] makphy2 at wm2 phy 1: I210 10/100/1000 media interface, rev. 0
[ 1.033457] makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.033457] ppb3 at pci0 dev 2 function 4: vendor 1022 product 1439 (rev. 0x00)
[ 1.033457] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.033457] ppb3: link is x1 @ 2.5GT/s
[ 1.033457] pci4 at ppb3 bus 4
[ 1.033457] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.033457] wm3 at pci4 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.033457] wm3: for TX and RX interrupting at msix3 vec 0 affinity to 1
[ 1.033457] wm3: for TX and RX interrupting at msix3 vec 1 affinity to 2
[ 1.033457] wm3: for LINK interrupting at msix3 vec 2
[ 1.033457] wm3: PCI-Express bus
[ 1.033457] wm3: 64 words iNVM, version 0.6
[ 1.033457] wm3: Ethernet address 00:0d:b9:4e:88:13
[ 1.033457] wm3: Copper
[ 1.033457] wm3: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.033457] makphy3 at wm3 phy 1: I210 10/100/1000 media interface, rev. 0
[ 1.033457] makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.033457] vendor 1022 product 1537 (miscellaneous crypto) at pci0 dev 8 function 0 not configured
[ 1.033457] xhci0 at pci0 dev 16 function 0: vendor 1022 product 7814 (rev. 0x11)
[ 1.033457] xhci0: interrupting at msix4 vec 0
[ 1.033457] xhci0: xHCI version 1.0
[ 1.033457] usb0 at xhci0: USB revision 3.0
[ 1.033457] usb1 at xhci0: USB revision 2.0
[ 1.033457] ahcisata0 at pci0 dev 17 function 0: vendor 1022 product 7800 (rev. 0x39)
[ 1.033457] ahcisata0: 64-bit DMA
[ 1.033457] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf733ff81<CCCS,PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[ 1.033457] ahcisata0: interrupting at msi5 vec 0
[ 1.033457] atabus0 at ahcisata0 channel 0
[ 1.033457] atabus1 at ahcisata0 channel 1
[ 1.033457] ehci0 at pci0 dev 19 function 0: vendor 1022 product 7808 (rev. 0x39)
[ 1.033457] ehci0: interrupting at ioapic0 pin 18
[ 1.033457] ehci0: EHCI version 1.0
[ 1.033457] usb2 at ehci0: USB revision 2.0
[ 1.033457] piixpm0 at pci0 dev 20 function 0: vendor 1022 product 780b (rev. 0x42)
[ 1.033457] piixpm0: polling
[ 1.033457] iic0 at piixpm0 port 0: I2C bus
[ 1.033457] iic1 at piixpm0 port 1: I2C bus
[ 1.033457] iic2 at piixpm0 port 2: I2C bus
[ 1.033457] iic3 at piixpm0 port 3: I2C bus
[ 1.033457] pcib0 at pci0 dev 20 function 3: vendor 1022 product 780e (rev. 0x11)
[ 1.033457] sdhc0 at pci0 dev 20 function 7: vendor 1022 product 7813 (rev. 0x01)
[ 1.033457] sdhc0: interrupting at ioapic0 pin 16
[ 1.033457] sdhc0: SDHC 2.0, rev 16, SDMA, 50000 kHz, HS 3.3V, 2048 byte blocks
[ 1.033457] sdmmc0 at sdhc0 slot 0
[ 1.033457] pchb2 at pci0 dev 24 function 0: vendor 1022 product 1580 (rev. 0x00)
[ 1.033457] pchb3 at pci0 dev 24 function 1: vendor 1022 product 1581 (rev. 0x00)
[ 1.033457] pchb4 at pci0 dev 24 function 2: vendor 1022 product 1582 (rev. 0x00)
[ 1.033457] amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
[ 1.033457] amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family16h)
[ 1.033457] pchb5 at pci0 dev 24 function 4: vendor 1022 product 1584 (rev. 0x00)
[ 1.033457] pchb6 at pci0 dev 24 function 5: vendor 1022 product 1585 (rev. 0x00)
[ 1.033457] isa0 at pcib0
[ 1.033457] lpt0 at isa0 port 0x378-0x37b irq 7
[ 1.033457] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[ 1.033457] com0: console
[ 1.033457] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
[ 1.033457] acpicpu0 at cpu0: ACPI CPU
[ 1.033457] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.033457] acpicpu0: C2: I/O, lat 400 us, pow 0 mW
[ 1.033457] acpicpu0: P0: FFH, lat 4 us, pow 966 mW, 1000 MHz
[ 1.033457] acpicpu0: P1: FFH, lat 4 us, pow 795 mW, 800 MHz
[ 1.033457] acpicpu0: P2: FFH, lat 4 us, pow 600 mW, 600 MHz
[ 1.033457] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.033457] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.033457] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.033457] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.033457] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.033457] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.033457] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.033457] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.033457] acpicpu1 at cpu1: ACPI CPU
[ 1.033457] acpicpu2 at cpu2: ACPI CPU
[ 1.033457] acpicpu3 at cpu3: ACPI CPU
[ 1.033457] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.214576] timecounter: Timecounter "TSC" frequency 998166960 Hz quality 3000
[ 1.216872] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.225880] uhub0: 2 ports with 2 removable, self powered
[ 1.225880] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.225880] uhub1: 2 ports with 2 removable, self powered
[ 1.344634] uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.344634] uhub2: 2 ports with 2 removable, self powered
[ 1.344634] sdhc0: cmd timeout error
[ 1.374661] IPsec: Initialized Security Association Processing.
[ 1.374661] sdmmc0: SD card status: 4-bit, C10, U3
[ 1.384655] ld0 at sdmmc0: <0x1b:0x534d:EC2QT:0x30:0x814961cd:0x134>
[ 1.394657] ld0: 61056 MB, 7783 cyl, 255 head, 63 sec, 512 bytes/sect x 125042688 sectors
[ 1.394657] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 1.404662] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 2.875323] umass0 at uhub1 port 1 configuration 1 interface 0
[ 2.885423] umass0: vendor 058f (0x58f) product 6387 (0x6387), rev 2.00/1.00, addr 1
[ 2.895734] umass0: using SCSI over Bulk-Only
[ 2.895734] scsibus0 at umass0: 2 targets, 1 lun per target
[ 2.895734] sd0 at scsibus0 target 0 lun 0: <, , 8.07> disk removable
[ 2.906333] sd0: fabricating a geometry
[ 2.906333] sd0: 14800 MB, 14800 cyl, 64 head, 32 sec, 512 bytes/sect x 30310400 sectors
[ 2.916403] sd0: fabricating a geometry
[ 2.927305] sd0: GPT GUID: 3a52e035-4567-4d0e-9770-4611ad1eb388
[ 2.927305] dk0 at sd0: "9232cac1-82f9-484a-bba0-1163147295de", 1024000 blocks at 34, type: ffs
[ 2.942697] dk1 at sd0: "11f1e91b-a1a5-4bd6-866b-ef731937dd51", 29286333 blocks at 1024034, type: <unknown>
[ 2.952393] wd0 at atabus0 drive 0
[ 2.955610] wd0: <Samsung SSD 860 EVO mSATA 500GB>
[ 2.955610] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[ 2.955610] wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
[ 2.971070] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 2.971070] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.595647] uhub3 at uhub2 port 1: vendor 0438 (0x438) product 7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
[ 3.607439] uhub3: single transaction translator
[ 3.607439] uhub3: 4 ports with 4 removable, self powered
[ 3.805742] uhub4 at uhub1 port 2: vendor 1a40 (0x1a40) USB 2.0 Hub (0x101), class 9/0, rev 2.00/1.11, addr 2
[ 3.818273] uhub4: single transaction translator
[ 3.818273] uhub4: 4 ports with 4 removable, self powered
[ 4.215950] boot device: ld0
[ 4.227205] root on ld0a dumps on ld0b
[ 4.227205] root file system type: ffs
[ 4.238962] kern.module.path=/stand/amd64/9.0/modules
[ 5.216403] WARNING: ZFS on NetBSD is under development
[ 5.236482] ZFS filesystem version: 5
[ 368.431581] uhub4: detached
[ 368.431581] uhub4: at uhub1 port 2 (addr 2) disconnected
[ 435.791321] uhub1: autoconfiguration error: device problem, disabling port 2
Home |
Main Index |
Thread Index |
Old Index