I have Lenovo G500 with following dmesg and atactl smart staus. It gets froze automatically even at login screen if i leave it without using. what could be causing this behavior. when it freezes i am unable to get response from "CTRL+T" or "CTRL+ALT+F1-F5/Backspace"
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0_STABLE (GENERIC) #0: Wed Feb 20 09:51:25 UTC 2019
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3996 MB
avail memory = 3858 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 20236 (Lenovo G500)
mainbus0 (root)
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000CCFFE210 000094 (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x00000000CCFFA000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x00000000CCFEC000 00A06F (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x00000000CCFBB000 000040
ACPI: SLIC 0x00000000CCFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x00000000CCFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x00000000CCFFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x00000000CCFF9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x00000000CCFF8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x00000000CCFF7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000CCFEB000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x00000000CCFE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x00000000CCFE7000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x00000000CCFE6000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x00000000CCFE4000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000CCFE2000 0008E4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000CCFE1000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Pentium(R) CPU 2020M @ 2.40GHz, id 0x306a9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Pentium(R) CPU 2020M @ 2.40GHz, id 0x306a9
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <LENOVO,CB-01 ,00000001>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810721D008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE812E31E008 000303 (v01 PmRef ApIst 00003000 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810716B588 000119 (v01 PmRef ApCst 00003000 INTL 20120518)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
pckbc1 at acpi0 (PS2K, IDEA0102) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSS4, ETD0613) (aux port): irq 12
VPC0 (VPC2004) at acpi0 not configured
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: LENOVO Li-Ion rechargeable battery
acpibat0: granularity: low->warn 0.264 Wh, warn->full 3.780 Wh
acpibat0: ACPI 4.0 functionality present
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0-100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
MEM2 (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
PTID (INT340E) at acpi0 not configured
acpitz0 at acpi0 (TZ00): cpu0 cpu1
acpitz0: levels: critical 127.0 C, hot 127.0 C, passive 0.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0154 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0156 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800065fec000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 14f1 product 5115
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: DAC03 2ch: HP Out [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
alc0 at pci1 dev 0 function 0: Atheros AR8172 PCIe Fast Ethernet
alc0: interrupting at ioapic0 pin 16
alc0: Ethernet address 20:1a:06:7d:f8:c3
atphy0 at alc0 phy 0: Atheros AR8035 10/100/1000 PHY, rev. 9
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 8086 product 0893 (rev. 0xc4)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 1T1R, BGN, address 0c:d2:92:72:f5:65
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS refuses to give up ownership, using force
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e5e (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xcf30ff43<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 80 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2400 MHz
acpicpu0: P1: FFH, lat 10 us, pow 32872 mW, 2300 MHz
acpicpu0: P2: FFH, lat 10 us, pow 31127 mW, 2200 MHz
acpicpu0: P3: FFH, lat 10 us, pow 29417 mW, 2100 MHz
acpicpu0: P4: FFH, lat 10 us, pow 27740 mW, 2000 MHz
acpicpu0: P5: FFH, lat 10 us, pow 26096 mW, 1900 MHz
acpicpu0: P6: FFH, lat 10 us, pow 24490 mW, 1800 MHz
acpicpu0: P7: FFH, lat 10 us, pow 22588 mW, 1700 MHz
acpicpu0: P8: FFH, lat 10 us, pow 21045 mW, 1600 MHz
acpicpu0: P9: FFH, lat 10 us, pow 19534 mW, 1500 MHz
acpicpu0: P10: FFH, lat 10 us, pow 18055 mW, 1400 MHz
acpicpu0: P11: FFH, lat 10 us, pow 16611 mW, 1300 MHz
acpicpu0: P12: FFH, lat 10 us, pow 15194 mW, 1200 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=90
DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2394656680 Hz quality 3000
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 1.5Gb/s
drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: vendor 413c (0x413c) Dell KB216 Wired Keyboard (0x2113), rev 1.10/1.08, addr 1, iclass 3/1
ukbd0 at uhidev0
wd0 at atabus0 drive 0
wd0: <ST500LT012-9WS142>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 1033622 cyl, 15 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <PLDS DVD-RW DS8A9SH, O10A11857L1CG391JZX6, EL3A> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: vendor 413c (0x413c) Dell KB216 Wired Keyboard (0x2113), rev 1.10/1.08, addr 1, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub4: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
ubt0 at uhub4 port 3
ubt0: vendor 8087 (0x8087) product 07da (0x7da), rev 2.00/78.69, addr 3
uvideo0 at uhub5 port 4 configuration 1 interface 0: Generic (0x174f) Lenovo EasyCamera (0x114f), rev 2.00/3.27, addr 3
video0 at uvideo0: Generic (0x174f) Lenovo EasyCamera (0x114f), rev 2.00/3.27, addr 3
ugen0 at uhub4 port 4
ugen0: Generic (0xbda) USB2.0-CRW (0x129), rev 2.00/39.60, addr 4
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 7 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
/: replaying log to memory
root file system type: ffs
kern.module.path=/stand/amd64/8.0/modules
/: replaying log to disk
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
atactl wd0 smart status
Password:
SMART supported, SMART enabled
id value thresh crit collect reliability description raw
1 111 34 yes online positive Raw read error rate 37639016
3 99 0 yes online positive Spin-up time 0
4 97 20 no online positive Start/stop count 3419
5 100 36 yes online positive Reallocated sector count 0
7 75 30 yes online positive Seek error rate 8655159534
9 95 0 no online positive Power-on hours count 233096465093742
10 100 97 yes online positive Spin retry count 0
12 98 20 no online positive Device power cycle count 2892
184 100 99 no online positive End-to-end error 0
187 100 0 no online positive Reported uncorrect 0
188 100 0 no online positive Command Timeout 4295032834
189 100 0 no online positive High Fly Writes 0
190 55 45 no online positive Airflow Temperature 45 Lifetime min/max 43/89
191 100 0 no online positive G-sense error rate 811
192 100 0 no online positive Power-off retract count 153
193 6 0 no online positive Load cycle count 189339
194 45 0 no online positive Temperature 45 Lifetime min/max 0/18
196 95 30 yes online positive Reallocated event count 266554260328941
197 100 0 no online positive Current pending sector 0
198 100 0 no offline positive Offline uncorrectable 0
199 200 0 no online positive Ultra DMA CRC error count 0
254 100 0 no online positive Free Fall Sensor 0
Regards,
Jay