NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Little brightness issue on Pavilion dv2889



Hi,

I'm running NetBSD 5.0 Stable on my Pavilion dv2899, the acpi works
almost perfectly (battery time, temperature works fine) But I just
have a little issue with the brightness, in fact if I want to
decrease/increase my brightness using the fn keybinds it doesn't
change immediatly, I need to go in a tty and come back to X (seems
like `refresh' the screen).

This is the dmesg output

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (Fraise) #0: Mon May 25 01:28:09 CEST 2009
        
root%Fraise.malikania.org@localhost:/usr/obj/sys/arch/amd64/compile/Fraise
total memory = 3070 MB
avail memory = 2967 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xbfedf000 (35 entries)
Hewlett-Packard HP Pavilion dv2700 Notebook PC (F.2A    )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2094MHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel 686-class, 2094MHz, id 0x10676
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
hpqlb0 at acpi0 (QLBD, HPQ0007): HP Quick Launch Buttons
WMID (PNP0C14) at acpi0 not configured
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpidalb0 at acpi0 (MCEB, PNP0C32-4): Direct Application Launch Button
acpidalb1 at acpi0 (DVDB, PNP0C32-2): Direct Application Launch Button
acpidalb2 at acpi0 (QPWB, PNP0C32-1): Direct Application Launch Button
acpidalb3 at acpi0 (MUSB, PNP0C32-3): Direct Application Launch Button
acpidalb4 at acpi0 (PICB, PNP0C32-6): Direct Application Launch Button
acpidalb5 at acpi0 (VDOB, PNP0C32-7): Direct Application Launch Button
acpidalb6 at acpi0 (LTVB, PNP0C32-8): Direct Application Launch Button
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: SMP-SS26, LION, VE06055  5637
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
pckbc1 at acpi0 (KBD0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, AUI1500) (aux port): irq 12
FWHD (INT0800) at acpi0 not configured
attimer0 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpitz0 at acpi0 (TZS0): critical 120.0C hot 103.0C passive 60.0C,
passive cooling
acpitz1 at acpi0 (TZS1): critical 120.0C hot 120.0C, passive cooling
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a00 (rev. 0x0c)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2a01 (rev. 0x0c)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0427 (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 18
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x284b (rev. 3), HDA rev. 1.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
ppb1: disabling notification events
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03)
ppb2: disabling notification events
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 FE rev. A2 (0x3): ioapic0 pin 17
msk0 at mskc0 port A: Ethernet address 00:1d:72:55:82:92
OUI 0x000ac2 model 0x0008 rev 3 at msk0 phy 0 not configured
OUI 0x000800 model 0x0004 rev 0 at msk0 phy 3 not configured
OUI 0x002200 model 0x0011 rev 0 at msk0 phy 6 not configured
msk0: no PHY found!
ppb3 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x03)
ppb3: disabling notification events
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 3: vendor 0x8086 product 0x2845 (rev. 0x03)
ppb4: disabling notification events
pci5 at ppb4 bus 7
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci5 dev 0 function 0: vendor 0x8086 product 0x4229 (rev. 0x61)
iwn0: interrupting at ioapic0 pin 19
iwn0: MoW2, address 00:1f:3b:3b:f6:45
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 23
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
pci6 at ppb5 bus 8
pci6: i/o space, memory space enabled
vendor 0x1180 product 0x0832 (Firewire serial bus, interface 0x10,
revision 0x05) at pci6 dev 9 function 0 not configured
vendor 0x1180 product 0x0822 (SD Host Controller system, revision
0x22) at pci6 dev 9 function 1 not configured
vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x12) at
pci6 dev 9 function 2 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x12) at
pci6 dev 9 function 3 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x12) at
pci6 dev 9 function 4 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2815 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829
ahcisata0: interrupting at ioapic0 pin 20
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe720e080
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <Slimtype DVD A  DS8A1H, 803270105953, WH66>
cdrom removable
acpiacad0: AC adapter online.
azalia0: codec[0]: 0x14f1/0x5051 (rev. 0.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wd0 at atabus2 drive 0: <Hitachi HTS542525K9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
ahcisata0 port 1: PHY offline
uvideo0 at uhub6 port 5 configuration 1 interface 0: Chicony
Electronics Co., Ltd. HP Webcam, rev 2.00/6.04, addr 2
video0 at uvideo0: Chicony Electronics Co., Ltd. HP Webcam, rev
2.00/6.04, addr 2
uhidev0 at uhub4 port 2 configuration 1 interface 0
uhidev0: Microsoft Compact Optical Mouse 500, rev 1.10/1.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
hpqlb0: registering on wskbd0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ubt0 at uhub5 port 2
ubt0: Broadcom Corp HP Integrated Module, rev 2.00/1.00, addr 2
mskc0: interrupt moderation is 1000 us
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
uhidev0: at uhub4 port 2 (addr 2) disconnected
wsmouse1: detached
ums0: detached
uhidev0: detached
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Microsoft Compact Optical Mouse 500, rev 1.10/1.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
umass0 at uhub6 port 4 configuration 1 interface 0
umass0: Prolific Technology Inc. Mass Storage Device, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SAMSUNG, HM120JC, YL10> disk fixed
sd0: fabricating a geometry
sd0: 111 GB, 114473 cyl, 64 head, 32 sec, 512 bytes/sect x 234441648 sectors
sd0: fabricating a geometry
/dev/sd0e: file system not clean; please fsck(8)

And my graphic card is :
001:00:0: NVIDIA GeForce 8400M GS (VGA display, revision 0xa1)


Home | Main Index | Thread Index | Old Index