NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
port-riscv/60482: NetBSD 11.0_RC6 on Starfive Visionfive2 panics while booting from sd-card if nvme is connected
>Number: 60482
>Category: port-riscv
>Synopsis: NetBSD 11.0_RC6 on Starfive Visionfive2 panics while booting from sd-card if nvme is connected
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-riscv-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Thu Jul 23 11:25:00 +0000 2026
>Originator: Prince Sharma
>Release: NetBSD 11.0_RC6
>Organization:
Self-employed
>Environment:
Once booted from sd-card (128 GB Samsung EVO) -
riscv64# uname -a
NetBSD riscv64 11.0_RC6 NetBSD 11.0_RC6 (GENERIC64) #0: Tue Jul 7 15:10:39 UTC 2026 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/riscv/compile/GENERIC64 riscv
>Description:
I believe this was already reported a few months back by someone and I read the complete thread between the poster and Nick, and I would like to provide more details (latest), that the issue still exists in 11.0_rc6 on Visionfive2.
Booting from sd-card works fine (once the rootfs is expanded to full available size at first boot), if no nvme is connected. However if an nvme is connected to the board, I see the previously known -
"[17.0099762] panic: cpu0: softints stuck for 16 seconds"
Let me provide full details of the complete environment if it helps -
1. THE OPENSBI prompt -
********************************************************
U-Boot SPL 2021.10 (Oct 10 2025 - 11:25:33 +0800)
LPDDR4: 8G version: g8ad50857.
Trying to boot from SPI
OpenSBI v1.2
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|___/_____|
| |
|_|
Platform Name : StarFive VisionFive V2
Platform Features : medeleg
Platform HART Count : 5
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 4000000Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform PMU Device : ---
Platform Reboot Device : pm-reset
Platform Shutdown Device : pm-reset
Platform Suspend Device : ---
Firmware Base : 0x40000000
Firmware Size : 248 KB
Firmware RW Offset : 0x20000
Runtime SBI Version : 1.0
Domain0 Name : root
Domain0 Boot HART : 1
Domain0 HARTs : 0*,1*,2*,3*,4*
Domain0 Region00 : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
Domain0 Region01 : 0x0000000040000000-0x000000004001ffff M: (R,X) S/U: ()
Domain0 Region02 : 0x0000000040020000-0x000000004003ffff M: (R,W) S/U: ()
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff M: (R,W,X) S/U: (R,W,X)
Domain0 Next Address : 0x0000000040200000
Domain0 Next Arg1 : 0x0000000042200000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Domain0 SysSuspend : yes
Boot HART ID : 1
Boot HART Domain : root
Boot HART Priv Version : v1.11
Boot HART Base ISA : rv64imafdcbx
Boot HART ISA Extensions : none
Boot HART PMP Count : 8
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 34
Boot HART MHPM Count : 2
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10 (Oct 10 2025 - 11:25:33 +0800), Build: jenkins-github_visionfive2_6.12-16
CPU: rv64imacu_zba_zbb
Model: StarFive VisionFive V2
DRAM: 8 GiB
MMC: sdio0@16010000: 0, sdio1@16020000: 1
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
OK
StarFive EEPROM format v2
--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110B1-2318-D008E000-18005086
data version: 0x2
PCB revision: 0xb2
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:ba:4a
Ethernet MAC1 address: 6c:cf:39:00:ba:4b
--------EEPROM INFO--------
In: serial
Out: serial
Err: serial
Model: StarFive VisionFive V2
Net: eth0: ethernet@16030000, eth1: ethernet@16040000
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
Couldn't find partition mmc 1:1
Can't set block device
Card did not respond to voltage select! : -110
Couldn't find partition mmc 1:1
Can't set block device
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
No EFI system partition
ERROR: invalid device tree
StarFive #
=====================
StarFive # version
U-Boot 2021.10 (Oct 10 2025 - 11:25:33 +0800), Build: jenkins-github_visionfive2_6.12-16
riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot JH7110_VF2_6.12_v6.0.0) 12.2.0
GNU ld (GNU Binutils) 2.39
=====================
StarFive # mmcinfo
Card did not respond to voltage select! : -110
=====================
StarFive # mmc list
sdio0@16010000: 0
sdio1@16020000: 1
=====================
StarFive # usb info
USB is stopped. Please issue 'usb start' first.
StarFive # usb start
starting USB...
No working controllers found
=====================
StarFive # coninfo
List of available devices:
serial@10000000 00000007 IO
serial 00000003 IO stdin stdout stderr
vidconsole 00000002 .O
=====================
StarFive # nvme scan
StarFive #
StarFive # nvme detail
StarFive #
StarFive # nvme info
StarFive #
********************************************************
2. THE FAILURE TO BOOT LOGS WHEN BOOTING FROM SD-CARD AND AN NVME IS CONNECTED -
Welcome to minicom 2.10
OPTIONS: I18n
Port /dev/ttyUSB0, 00:55:48 [U]
Press CTRL-A Z for help on special keys
U-Boot SPL 2021.10 (Oct 10 2025 - 11:25:33 +0800)
LPDDR4: 8G version: g8ad50857.
Trying to boot from SPI
OpenSBI v1.2
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|___/_____|
| |
|_|
Platform Name : StarFive VisionFive V2
Platform Features : medeleg
Platform HART Count : 5
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 4000000Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform PMU Device : ---
Platform Reboot Device : pm-reset
Platform Shutdown Device : pm-reset
Platform Suspend Device : ---
Firmware Base : 0x40000000
Firmware Size : 248 KB
Firmware RW Offset : 0x20000
Runtime SBI Version : 1.0
\\-__,------,___.
\\ __,---` NetBSD/riscv efiboot (riscv64)
\\ `---,_. Revision 2.16 (Tue Jul 7 15:10:39 UTC 2026)
\\-,_____,.---`
\\
\\
\\
Press return to boot now, any other key for boot prompt
booting netbsd - starting in 0 seconds.
4586950+1907168+1476468+620684 [580296+355691]=0xae50c0
clk u0_mipitx_dphy_clk_txesc already disabled
------------
NetBSD start
sp: 0x0000_0000_f560_3000
pc: 0x0000_0000_f4e0_0080
hart: 0x0000_0000_0000_0001
dtb: 0x0000_0000_f5a0_0000
vendor: 0x0000_0000_0000_0489
l1: 0x0000_0000_f560_c000
l2: 0x0000_0000_f560_b000
uspace: 0x0000_0000_f560_1000
bootstk: 0x0000_0000_f560_3000
vtopdiff:0xffff_ffbf_0b20_0000
bss: 0x0000_0000_f576_8774 - 0x0000_0000_f560_d000
l2pde: 0x0000_0000_f560_b800: 0x0000_0000_3d58_3001
kern: 0x0000_0000_f560_c000: 0x0000_0000_3d38_00ef
kern: 0x0000_0000_f560_c008: 0x0000_0000_3d40_00ef
kern: 0x0000_0000_f560_c010: 0x0000_0000_3d48_00ef
kern: 0x0000_0000_f560_c018: 0x0000_0000_3d50_00ef
kern: 0x0000_0000_f560_c020: 0x0000_0000_3d58_00ef
kern: 0x0000_0000_f560_c028: 0x0000_0000_3d60_00ef
kern: 0x0000_0000_f560_c030: 0x0000_0000_3d68_00ef
kern: 0x0000_0000_f560_c038: 0x0000_0000_3d70_00ef
kern: 0x0000_0000_f560_c040: 0x0000_0000_3d78_00ef
kern: 0x0000_0000_f560_c048: 0x0000_0000_3d80_00ef
kern: 0x0000_0000_f560_c050: 0x0000_0000_3d88_00ef
kern: 0x0000_0000_f560_c058: 0x0000_0000_3d90_00ef
kern: 0x0000_0000_f560_c060: 0x0000_0000_3d98_00ef
kern: 0x0000_0000_f560_c068: 0x0000_0000_3da0_00ef
kern: 0x0000_0000_f560_c070: 0x0000_0000_3da8_00ef
kern: 0x0000_0000_f560_c078: 0x0000_0000_3db0_00ef
dtb: 0x0000_0000_f560_c080: 0x0000_0000_3d68_00e7
PM
[ 1.0000000] FDT<0xffffffc002000000>
[ 1.0000000] cpufunc
[ 1.0000000] devmap 0xffffffc00082f738
[ 1.0000000] bootstrap
[ 1.0000000] stdout
[ 1.0000000] fdt size a000/9a88
[ 1.0000000] consinit ok
[ 1.0000000] NetBSD/riscv (fdt) booting ...
[ 1.0000000] FDT /memory @ 0x40000000 size 0x7f00000
[ 1.0000000] FDT /memory @ 0x47f0d000 size 0xadf84000
[ 1.0000000] FDT /memory @ 0xf5e92000 size 0x2000
[ 1.0000000] FDT /memory @ 0xf5e95000 size 0x833000
[ 1.0000000] FDT /memory @ 0xf66c9000 size 0x3000
[ 1.0000000] FDT /memory @ 0xf66d4000 size 0x1829000
[ 1.0000000] FDT /memory @ 0xf7efe000 size 0x148102000
[ 1.0000000] init_riscv: memory start 40000000 end 240000000 (len 200000000)
[ 1.0000000] cpu_kernel_vm_init: kernel phys start 0xf4e00000 end 0xf5800000
[ 1.0000000] dm: 0xffffffc00080bc08 : 0x100000e7
[ 1.0000000] dm: 0xffffffc00080bc10 : 0x200000e7
[ 1.0000000] dm: 0xffffffc00080bc18 : 0x300000e7
[ 1.0000000] dm: 0xffffffc00080bc20 : 0x400000e7
[ 1.0000000] dm: 0xffffffc00080bc28 : 0x500000e7
[ 1.0000000] dm: 0xffffffc00080bc30 : 0x600000e7
[ 1.0000000] dm: 0xffffffc00080bc38 : 0x700000e7
[ 1.0000000] dm: 0xffffffc00080bc40 : 0x800000e7
[ 1.0000000] bootargs: console=tty1 console=ttyS0,115200 debug rootwait earlycon=sbi
[ 1.0000000] msgbufaddr = 0xffffffe23fff0000
[ 1.0000000] ------------------------------------------
[ 1.0000000] kern_vtopdiff = 0xffffffbf0b200000
[ 1.0000000] memory_start = 0x 40000000
[ 1.0000000] memory_end = 0x 240000000
[ 1.0000000] memory_size = 0x 200000000
[ 1.0000000] kernstart_phys = 0x f4e00000
[ 1.0000000] kernend_phys = 0x f5800000
[ 1.0000000] msgbufaddr = 0xffffffe23fff0000
[ 1.0000000] VM_MIN_KERNEL_ADDRESS = 0xffffffc000000000
[ 1.0000000] kernstart_mega = 0xffffffc000000000
[ 1.0000000] kernstart = 0xffffffc000000000
[ 1.0000000] kernend = 0xffffffc000a00000
[ 1.0000000] kernend_mega = 0xffffffc000a00000
[ 1.0000000] VM_MAX_KERNEL_ADDRESS = 0xffffffd000000000
[ 1.0000000] pmap_direct_base = 0xffffffe000000000
[ 1.0000000] ------------------------------------------
[ 1.0000000] adding 0x40040000 - 0x47f00000 to freelist 0
[ 1.0000000] adding 0x47f0d000 - 0xf4e00000 to freelist 0
[ 1.0000000] adding 0xf5800000 - 0xf5a00000 to freelist 0
[ 1.0000000] adding 0xf5a0a000 - 0xf5e91000 to freelist 0
[ 1.0000000] adding 0xf5e92000 - 0xf5e94000 to freelist 0
[ 1.0000000] adding 0xf5e95000 - 0xf66c8000 to freelist 0
[ 1.0000000] adding 0xf66c9000 - 0xf66cc000 to freelist 0
[ 1.0000000] adding 0xf66d4000 - 0xf7efd000 to freelist 0
[ 1.0000000] adding 0xf7efe000 - 0x23fff0000 to freelist 0
[ 1.0000000] common cpusets bs_pde 0xffffffc00080b000 ASID max 0 kcpusets nkmempages limits: ffffffc004000000 - ffffffd000000000
[ 1.0000000] kva : ffffffc004000000 - ffffffc2b9400000
[ 1.0000000] mpstart
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 11.0_RC6 (GENERIC64) #0: Tue Jul 7 15:10:39 UTC 2026
[ 1.0000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/riscv/compile/GENERIC64
[ 1.0000000] total memory = 8181 MB
[ 1.0000000] avail memory = 7912 MB
[ 1.0000000] mainbus0 (root)
[ 1.0000000] simplebus0 at mainbus0: StarFive VisionFive 2 v1.3B
[ 1.0000000] simplebus1 at simplebus0
[ 1.0000000] cpus0 at simplebus0
[ 1.0000000] simplebus2 at simplebus0
[ 1.0000000] cpu0 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427
[ 1.0000000] cpu1 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427
[ 1.0000000] cpu2 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427
[ 1.0000000] cpu3 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427
[ 1.0000000] intc0 at cpu0: local interrupt controller
[ 1.0000000] intc1 at cpu1: local interrupt controller
[ 1.0000000] intc2 at cpu2: local interrupt controller
[ 1.0000000] intc3 at cpu3: local interrupt controller
[ 1.0000000] fclock0 at simplebus0: 49152000 Hz fixed clock (tdm_ext)
[ 1.0000000] fclock1 at simplebus0: 12288000 Hz fixed clock (mclk_ext)
[ 1.0000000] fclock2 at simplebus0: 12288000 Hz fixed clock (i2srx_bclk_ext)
[ 1.0000000] fclock3 at simplebus0: 192000 Hz fixed clock (i2srx_lrck_ext)
[ 1.0000000] syscon0 at simplebus1: System Controller Registers
[ 1.0000000] jh7110syscon0 at simplebus1: JH7110 STG system controller
[ 1.0000000] fclock4 at simplebus0: 24000000 Hz fixed clock (osc)
[ 1.0000000] fclock5 at simplebus0: 12288000 Hz fixed clock (i2stx_bclk_ext)
[ 1.0000000] fclock6 at simplebus0: 192000 Hz fixed clock (i2stx_lrck_ext)
[ 1.0000000] fclock7 at simplebus0: 50000000 Hz fixed clock (gmac1_rmii_refin)
[ 1.0000000] fclock8 at simplebus0: 125000000 Hz fixed clock (gmac1_rgmii_rxin)
[ 1.0000000] syscon1 at simplebus1: System Controller Registers
[ 1.0000000] fclock9 at simplebus0: 50000000 Hz fixed clock (gmac0_rmii_refin)
[ 1.0000000] fclock10 at simplebus0: 125000000 Hz fixed clock (gmac0_rgmii_rxin)
[ 1.0000000] fclock11 at simplebus0: 32768 Hz fixed clock (rtc_osc)
[ 1.0000000] fclock12 at simplebus0: 74250000 Hz fixed clock (dvp_clk)
[ 1.0000000] fclock13 at simplebus0: 297000000 Hz fixed clock (hdmitx0_pixelclk)
[ 1.0000000] jh7110clkc0 at simplebus1: JH7110 System Clock and Reset Generator
[ 1.0000000] plic0 at simplebus1: RISC-V PLIC (136 IRQs)
[ 1.0000000] jh7110pinctrl0 at simplebus1: Pin Controller
[ 1.0000000] jh7110clkc1 at simplebus1: JH7110 System-Top-Group Clock and Reset Generator
[ 1.0000000] jh7110clkc2 at simplebus1: JH7110 Always-On Clock and Reset Generator
[ 1.0000000] jh7110pinctrl1 at simplebus1: Pin Controller
[ 1.0000000] jh7110clkc3 at simplebus1: JH7110 Video Output Clock and Reset Generator
[ 1.0000000] jh7110pciephy0 at simplebus1: JH7110 PCIe PHY
[ 1.0000000] jh7110pciephy1 at simplebus1: JH7110 PCIe PHY
[ 1.0000000] ccache0 at simplebus1: L2 cache controller. 2048 KiB/64B 16-way (2048 set).
[ 1.0000000] /opp-table-0 at simplebus0 not configured
[ 1.0000000] dwiic0 at simplebus1: I2C controller
[ 1.0000000] dwiic0: interrupting on plic0 irq 50
[ 1.0000000] iic0 at dwiic0: I2C bus
[ 1.0000000] pmic (x-powers,axp15060) at iic0 addr 0x36 not configured
[ 1.0000000] jh71x0temp0 at simplebus1: JH71x0 temperature sensor
[ 1.0000000] /soc/dma-controller@16050000 at simplebus1 not configured
[ 1.0000000] /soc/phy@10200000 at simplebus1 not configured
[ 1.0000000] /soc/syscon@13030000/clock-controller at syscon0 not configured
[ 1.0000000] /soc/dma-controller@16008000 at simplebus1 not configured
[ 1.0000000] eqos0 at simplebus1: DesignWare EQOS ver 0x52 (0x41)
[ 1.0000000] eqos0: Ethernet address 6c:cf:39:00:ba:4a
[ 1.0000000] mcommphy0 at eqos0 phy 0: Motorcomm YT8531 GbE PHY
[ 1.0000000] mcommphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[ 1.0000000] eqos0: interrupting on plic0 irq 7
[ 1.0000000] eqos1 at simplebus1: DesignWare EQOS ver 0x52 (0x41)
[ 1.0000000] eqos1: Ethernet address 6c:cf:39:00:ba:4b
[ 1.0000000] mcommphy1 at eqos1 phy 0: Motorcomm YT8531 GbE PHY
[ 1.0000000] mcommphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[ 1.0000000] eqos1: interrupting on plic0 irq 78
[ 1.0000000] /soc/clock-controller@19810000 at simplebus1 not configured
[ 1.0000000] /soc/phy@19820000 at simplebus1 not configured
[ 1.0000000] /soc/isp@19840000 at simplebus1 not configured
[ 1.0000000] /soc/power-controller@17030000 at simplebus1 not configured
[ 1.0000000] /soc/csi@19800000 at simplebus1 not configured
[ 1.0000000] jh7110pcie0 at simplebus1: PCIe
[ 1.0000000] jh7110pcie0: interrupting on plic0 irq 56
[ 1.0000000] pci0 at jh7110pcie0 bus 0
[ 1.0000000] ppb0 at pci0 dev 0 function 0: vendor 1556 product 1111 (rev. 0x02)
[ 1.0000000] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.0000000] pci1 at ppb0 bus 1
[ 1.0000000] xhci0 at pci1 dev 0 function 0: vendor 1106 product 3483 (rev. 0x01)
[ 1.0000000] xhci0: interrupting at plic0 irq 56
[ 1.0000000] usb0 at xhci0: USB revision 3.0
[ 1.0000000] usb1 at xhci0: USB revision 2.0
[ 1.0000000] jh7110pcie1 at simplebus1: PCIe
[ 1.0000000] jh7110pcie1: interrupting on plic0 irq 57
[ 1.0000000] pci2 at jh7110pcie1 bus 0
[ 1.0000000] ppb1 at pci2 dev 0 function 0: vendor 1556 product 1111 (rev. 0x02)
[ 1.0000000] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.0000000] pci3 at ppb1 bus 1
[ 1.0000000] nvme0 at pci3 dev 0 function 0: vendor 1e4b product 1202 (rev. 0x01)
[ 1.0000000] nvme0: NVMe 1.4
[ 1.0000000] nvme0: interrupting at plic0 irq 57
[ 1.0000000] nvme0: CONSISTENT NVME S7 128GB, firmware SN16672, serial HA202512040100801
[ 1.0000000] ld4 at nvme0 nsid 1
[ 1.0000000] ld4: 119 GB, 15566 cyl, 255 head, 63 sec, 512 bytes/sect x 250069680 sectors (0 bytes/physsect)
[ 1.0000000] /sound at simplebus0 not configured
[ 1.0000000] /soc/pwmdac@100b0000 at simplebus1 not configured
[ 1.0000000] /audio-codec at simplebus0 not configured
[ 1.0000000] /soc/timer@2000000 at simplebus1 not configured
[ 1.0000000] com0 at simplebus1: DesignWare APB UART, no fifo
[ 1.0000000] com0: console
[ 1.0000000] com0: interrupting on plic0 irq 32
[ 1.0000000] dwiic1 at simplebus1: I2C controller
[ 1.0000000] dwiic1: interrupting on plic0 irq 35
[ 1.0000000] iic1 at dwiic1: I2C bus
[ 1.0000000] dwiic2 at simplebus1: I2C controller
[ 1.0000000] dwiic2: interrupting on plic0 irq 37
[ 1.0000000] iic2 at dwiic2: I2C bus
[ 1.0000000] /soc/spi@10060000 at simplebus1 not configured
[ 1.0000000] jh71x0usb0 at simplebus1: USB
[ 1.0000000] dwiic3 at simplebus1: I2C controller
[ 1.0000000] dwiic3: interrupting on plic0 irq 51
[ 1.0000000] iic3 at dwiic3: I2C bus
[ 1.0000000] /soc/pwm@120d0000 at simplebus1 not configured
[ 1.0000000] /soc/spi@13010000 at simplebus1 not configured
[ 1.0000000] /soc/crypto@16000000 at simplebus1 not configured
[ 1.0000000] jh7110trng0 at simplebus1: JH7110 TRNG
[ 1.0000000] jh7110trng0: interrupting on plic0 irq 30
[ 1.0000000] dwcmmc0 at simplebus1: DesignWare SD/MMC
[ 1.0000000] dwcmmc0: interrupting on plic0 irq 74
[ 1.0000000] dwcmmc1 at simplebus1: DesignWare SD/MMC
[ 1.0000000] dwcmmc1: interrupting on plic0 irq 75
[ 1.0000000] /gpio-restart at simplebus0 not configured
[ 1.0000000] /soc/watchdog@13070000 at simplebus1 not configured
[ 1.0000000] /chosen/framebuffer@fe000000 at simplebus2 not configured
[ 1.0000000] xhci1 at simplebus1: cannot switch 'otg' mode to host
[ 1.0000000] /opp-table-0 at simplebus0 not configured
[ 1.0000000] /soc/dma-controller@16050000 at simplebus1 not configured
[ 1.0000000] /soc/phy@10200000 at simplebus1 not configured
[ 1.0000000] /soc/syscon@13030000/clock-controller at syscon0 not configured
[ 1.0000000] /soc/dma-controller@16008000 at simplebus1 not configured
[ 1.0000000] /soc/clock-controller@19810000 at simplebus1 not configured
[ 1.0000000] /soc/phy@19820000 at simplebus1 not configured
[ 1.0000000] /soc/isp@19840000 at simplebus1 not configured
[ 1.0000000] /soc/power-controller@17030000 at simplebus1 not configured
[ 1.0000000] /soc/csi@19800000 at simplebus1 not configured
[ 1.0000000] /sound at simplebus0 not configured
[ 1.0000000] /soc/pwmdac@100b0000 at simplebus1 not configured
[ 1.0000000] /audio-codec at simplebus0 not configured
[ 1.0000000] /soc/timer@2000000 at simplebus1 not configured
[ 1.0000000] /soc/spi@10060000 at simplebus1 not configured
[ 1.0000000] /soc/pwm@120d0000 at simplebus1 not configured
[ 1.0000000] /soc/spi@13010000 at simplebus1 not configured
[ 1.0000000] /soc/crypto@16000000 at simplebus1 not configured
[ 1.0000000] /gpio-restart at simplebus0 not configured
[ 1.0000000] /soc/watchdog@13070000 at simplebus1 not configured
[ 1.0000000] /chosen/framebuffer@fe000000 at simplebus2 not configured
[ 1.0000000] WARNING: system needs entropy for security; see entropy(7)
[ 1.7699837] cpu_boot_secondary_processors: starting secondary processors
[ 1.7699837] cpu_boot_secondary_processors: secondary processors hatched. 4 running
[ 1.7855747] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.7899837] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.7999780] sdmmc0 at dwcmmc0
[ 1.7999780] sdmmc1 at dwcmmc1
[ 1.9099775] sdmmc0: couldn't enable card: 60
[ 1.9299777] sdmmc1: SD card status: 4-bit, C10, U3
[ 1.9299777] ld1 at sdmmc1: <0x1b:0x534d:ED4QT:0x30:0x7a6f67b0:0x138>
[ 1.9399775] ld1: 119 GB, 15567 cyl, 255 head, 63 sec, 512 bytes/sect x 250085376 sectors (0 bytes/physsect)
[ 1.9599782] dk0 at ld1: "EFI", 163840 blocks at 32768, type: msdos
[ 1.9599782] dk1 at ld1: "netbsd-root", 249880576 blocks at 196608, type: ffs
[ 1.9699775] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 7.2399752] uhub1: device problem, disabling port 1
[ 17.0099762] panic: cpu0: softints stuck for 16 seconds
[ 17.0099762] cpu0: Begin traceback...
[ 17.0099762] have_addr: true
[ 17.0099762] addr: ffffffc2c35e2b10
[ 17.0099762] count: 65535
[ 17.0099762] modif:
[ 17.0099762] trace fp ffffffc2c35e2b10
[ 17.0099762] fp ffffffc2c35e2b50 vpanic() at ffffffc00033d5b6 netbsd:vpanic+0x13c
[ 17.0099762] fp ffffffc2c35e2b70 panic() at ffffffc00033d658 netbsd:panic+0x24
[ 17.0099762] fp ffffffc2c35e2c50 heartbeat() at ffffffc0002ee6c4 netbsd:heartbeat+0x30c
[ 17.0099762] fp ffffffc2c35e2c90 hardclock() at ffffffc0002da264 netbsd:hardclock+0x6c
[ 17.0099762] fp ffffffc2c35e2cb0 riscv_timer_intr() at ffffffc00000fea4 netbsd:riscv_timer_intr+0x4c
[ 17.0099762] fp ffffffc2c35e2d20 intc_intr_handler() at ffffffc00002086e netbsd:intc_intr_handler+0xb6
[ 17.0099762] tf ffffffc2c35e2d20 exception_kernexit() at ffffffc0000114d8 netbsd:cpu_exception_handler+0x98
[ 17.0099762] ---- trapframe 0xffffffc2c35e2d20 (288 bytes) ----
[ 17.0099762] Trapframe @ 0xffffffc2c35e2d20 (cause=9 (interrupt), status=0x120, pc=0xffffffc00030f464, va=0):
[ 17.0099762] ra =0xffffffc0002f442a sp =0xffffffc2c35e2e40 gp =0xffffffc000967fc0
[ 17.0099762] tp = 0 t0 = 0x5 t1 = 0x5 t2 = 0x222
[ 17.0099762] s0 =0xffffffc2c35e2e50 s1 =0xffffffc00095ba80 a0 = 0 a1 = 0x222
[ 17.0099762] a2 = 0 a3 =0xffffffc00081bcc0 a4 = 0 a5 = 0x1
[ 17.0099762] a6 =0xffffffe23fb534c0 a7 =0xffffffffffffffff s2 = 0x1 s3 =0xffffffc00081bcc0
[ 17.0099762] s4 =0xffffffc0000113b8 s5 =0xffffffe04011a900 s6 = 0x1 s7 = 0x1
[ 17.0099762] s8 = 0 s9 =0xffffffc00081bcc8 s10= 0 s11= 0
[ 17.0099762] t3 =0x3d81e9e750d701f2 t4 =0x9a4f0205405d766f t5 =0xbd8db8b1b5613354 t6 =0x659f598e8b66c169
[ 17.0099762] ------------------------------------------------
[ 17.0099762] fp ffffffc2c35e2e50 devnullop() at ffffffc00030f464 netbsd:devnullop+0x6
[ 17.0099762] fp 0000000000000000 ?() at ffffffc2c35e2edc
[ 17.0099762] cpu0: End traceback...
[ 17.0099762] Trapframe @ 0xffffffc2c35e29f0 (cause=3 (breakpoint), status=0x100, pc=0xffffffc000000628, va=0):
[ 17.0099762] ra =0xffffffc00033d5ba sp =0xffffffc2c35e2b10 gp =0xffffffc000967fc0
[ 17.0099762] tp = 0 t0 = 0x7 t1 =0xffffffc00000071a t2 = 0x222
[ 17.0099762] s0 =0xffffffc2c35e2b50 s1 =0xffffffc0006c4968 a0 = 0x6 a1 = 0x2
[ 17.0099762] a2 = 0 a3 =0xffffffc00081bcc0 a4 =0xffffffc00081bcc0 a5 = 0x1
[ 17.0099762] a6 = 0x75 a7 =0xffffffc0008f72e8 s2 =0xffffffc000993178 s3 =0xffffffc0009931f8
[ 17.0099762] s4 =0xffffffc2c35e2b78 s5 = 0x104 s6 =0xffffffc0009882d8 s7 = 0x9
[ 17.0099762] s8 = 0x1 s9 =0xffffffc00081bcc8 s10= 0 s11= 0
[ 17.0099762] t3 =0xffffffc2c35e2a1f t4 = 0xa t5 =0xfffffffffffffffe t6 = 0x63
[ 17.0099762] kernel: breakpoint
Stopped in pid 0.111 (system) at netbsd:clear_bss+0x10: c.ebreak
db{1}>
>How-To-Repeat:
Have the Visionfive2 board updated with latest firmware.
Flash the latest risc-v image to sd-card.
Connect an NVME to the VF2 board.
Connect the VF2 board to your computer using USB-TTL connector and open a serial monitor.
Boot VF2 in QSPI/Flash mode.
Do not press any key, let the boot process take from u-boot to sd-card to the kernel panic.
>Fix:
N/A
Home |
Main Index |
Thread Index |
Old Index