port-arm/60021: USB-only boot: uhub0 attaches but uhub1 never appears, no hotplug events; SD-boot sees hub+umass fine

To: port-arm-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: port-arm/60021: USB-only boot: uhub0 attaches but uhub1 never appears, no hotplug events; SD-boot sees hub+umass fine
From: "mac%culver.net@localhost via gnats" <gnats-admin%NetBSD.org@localhost>
Date: Fri, 20 Feb 2026 03:40:01 +0000 (UTC)
>Number:         60021
>Category:       port-arm
>Synopsis:       USB-only boot: uhub0 attaches but uhub1 never appears, no hotplug events; SD-boot sees hub+umass fi\
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-arm-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Fri Feb 20 03:40:00 +0000 2026
>Originator:     mac%culver.net@localhost
>Release:        NetBSD 11_0_RC1
>Organization:
        
>Environment:
NetBSD arm64 11.0_RC1 NetBSD 11.0_RC1 (GENERIC64) #0: Fri Feb  6 08:24:25 UTC 2026  mkrepro%mkrepro.NetBSD.org@localhost:/usr\
/src/sys/arch/evbarm/compile/GENERIC64 evbarm
        
System: NetBSD arm64 11.0_RC1 NetBSD 11.0_RC1 (GENERIC64) #0: Fri Feb  6 08:24:25 UTC 2026  mkrepro@mkrepro.NetBSD.\
org:/usr/src/sys/arch/evbarm/compile/GENERIC64 evbarm

Architecture: arm64
Machine: RPi 3B
>Description:
        using either MBR or non-MBR image boots via sdcard just fine.  Same image on USB stick does not
>How-To-Repeat:
        Write generic arm64 image onto USB stick, insert into RPi 3B, power up

Here is the sdcard boot:

[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[     1.000000]     2024, 2025, 2026
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 11.0_RC1 (GENERIC64) #0: Fri Feb  6 08:24:25 UTC 2026
[     1.000000]         mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/evbarm/compile/GENERIC64
[     1.000000] total memory = 930 MB
[     1.000000] avail memory = 895 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] armfdt0 (root)
[     1.000000] simplebus0 at armfdt0: Raspberry Pi 3 Model B Rev 1.2
[     1.000000] simplebus1 at simplebus0
[     1.000000] simplebus2 at simplebus0
[     1.000000] cpus0 at simplebus0
[     1.000000] simplebus3 at simplebus0
[     1.000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
[     1.000000] cpu0: package 0, core 0, smt 0, numa 0
[     1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.000000] cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
[     1.000000] cpu0: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
[     1.000000] cpu0: L1 32KB/64B 4-way (128 set) PIPT Data cache
[     1.000000] cpu0: L2 512KB/64B 16-way (512 set) PIPT Unified cache
[     1.000000] cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
[     1.000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
[     1.000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
[     1.000000] cpu1: package 0, core 1, smt 0, numa 0
[     1.000000] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.000000] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.000000] cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
[     1.000000] cpu1: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
[     1.000000] cpu1: L1 32KB/64B 4-way (128 set) PIPT Data cache
[     1.000000] cpu1: L2 512KB/64B 16-way (512 set) PIPT Unified cache
[     1.000000] cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
[     1.000000] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
[     1.000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
[     1.000000] cpu2: package 0, core 2, smt 0, numa 0
[     1.000000] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.000000] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.000000] cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
[     1.000000] cpu2: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
[     1.000000] cpu2: L1 32KB/64B 4-way (128 set) PIPT Data cache
[     1.000000] cpu2: L2 512KB/64B 16-way (512 set) PIPT Unified cache
[     1.000000] cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
[     1.000000] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
[     1.000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
[     1.000000] cpu3: package 0, core 3, smt 0, numa 0
[     1.000000] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.000000] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.000000] cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
[     1.000000] cpu3: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
[     1.000000] cpu3: L1 32KB/64B 4-way (128 set) PIPT Data cache
[     1.000000] cpu3: L2 512KB/64B 16-way (512 set) PIPT Unified cache
[     1.000000] cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
[     1.000000] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
[     1.000000] bcmicu0 at simplebus1
[     1.000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
[     1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller
[     1.000000] syscon0 at simplebus1autoconfiguration error: : couldn't get registers
[     1.000000] bcmaux0 at simplebus1
[     1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
[     1.000000] bcmicu1 at simplebus1: Multiprocessor
[     1.000000] gtmr0 at simplebus0: Generic Timer
[     1.000000] gtmr0: interrupting on local_intc irq 3
[     1.000000] armgtmr0 at gtmr0: Generic Timer (19200 kHz, virtual)
[     1.000000] timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500
[     1.000004] bcmgpio0 at simplebus1: GPIO controller 2835
[     1.000004] bcmgpio0: pins 0..31 interrupting on icu irq 49
[     1.000004] bcmgpio0: pins 32..54 interrupting on icu irq 50
[     1.000004] gpio0 at bcmgpio0: 54 pins
[     1.000004] plcom0 at simplebus1: ARM PL011 UART
[     1.000004] plcom0: txfifo 16 bytes
[     1.000004] plcom0: interrupting on icu irq 57
[     1.000004] com0 at simplebus1: BCM AUX UART, 1-byte FIFO
[     1.000004] com0: console
[     1.000004] com0: interrupting on icu irq 29, clock 800000000 Hz
[     1.000004] mmcpwrseq0 at simplebus0autoconfiguration error: : couldn't get reset GPIOs
[     1.000004] /soc/thermal@7e212000 at simplebus1 not configured
[     1.000004] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 DMA11
[     1.000004] /soc/power at simplebus1 not configured
[     1.000004] /phy at simplebus0 not configured
[     1.000004] bsciic0 at simplebus1: Broadcom Serial Controller
[     1.000004] bsciic0: interrupting on icu irq 53
[     1.000004] iic0 at bsciic0: I2C bus
[     1.000004] bcmmbox0 at simplebus1: VC mailbox
[     1.000004] bcmmbox0: interrupting on icu irq 65
[     1.000004] vcmbox0 at bcmmbox0
[     1.000004] /soc/timer@7e003000 at simplebus1 not configured
[     1.000004] /soc/txp@7e004000 at simplebus1 not configured
[     1.000004] bcmsdhost0 at simplebus1: SD HOST controller
[     1.000004] bcmsdhost0: interrupting on icu irq 56
[     1.000004] bsciic1 at simplebus1: Broadcom Serial Controller
[     1.000004] bsciic1: interrupting on icu irq 53
[     1.000004] iic1 at bsciic1: I2C bus
[     1.000004] /soc/pwm@7e20c000 at simplebus1 not configured
[     1.000004] sdhc0 at simplebus1: SDHC controller
[     1.000004] sdhc0: interrupting on icu irq 62
[     1.000004] bsciic2 at simplebus1: Broadcom Serial Controller
[     1.000004] bsciic2: interrupting on icu irq 53
[     1.000004] iic2 at bsciic2: I2C bus
[     1.000004] dwctwo0 at simplebus1: USB controller
[     1.000004] dwctwo0: interrupting on icu irq 9
[     1.000004] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
[     1.000004] /soc/vec@7e806000 at simplebus1 not configured
[     1.000004] /soc/hdmi@7e902000 at simplebus1 not configured
[     1.000004] /soc/gpu at simplebus1 not configured
[     1.000004] genfb0 at simplebus1: switching to framebuffer console
[     1.000004] genfb0: framebuffer at 0xfe876000, size 1280x720, depth 32, stride 5120
[     1.000004] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[     1.000004] wsmux1: connecting to wsdisplay0
[     1.000004] wsdisplay0: screen 1-3 added (default, vt100 emulation)
[     1.000004] vchiq0 at simplebus1: BCM2835 VCHIQ
[     1.000004] armpmu0 at simplebus0: Performance Monitor Unit
[     1.000004] gpioleds0 at simplebus0:
[     1.000004] bcmrng0 at simplebus1: RNG
[     1.000004] entropy: ready
[     1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.324135] sdmmc0 at bcmsdhost0
[     1.334137] sdhc0: SDHC 3.0, rev 153, caps <01610000/00000000>, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[     1.344137] sdmmc1 at sdhc0 slot 0
[     1.354139] dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
[     1.354139] usb0 at dwctwo0: USB revision 2.0
[     1.374142] armpmu0: interrupting on local_intc irq 9
[     1.374142] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.384144] uhub0: 1 port with 1 removable, self powered
[     1.394149] IPsec: Initialized Security Association Processing.
[     1.464150] sdmmc0: direct I/O error 5, r=6 p=0xffffc000b14fce5c write
[     1.484151] sdmmc0: SD card status: 4-bit, C10, U1
[     1.494154] ld0 at sdmmc0: <0x1b:0x534d:EB1QT:0x30:0x5c8b610b:0x126>
[     1.504159] ld0: 30528 MB, 7753 cyl, 128 head, 63 sec, 512 bytes/sect x 62521344 sectors (0 bytes/physsect)
[     1.514156] ld0: GPT GUID: 3efb4280-0335-11f1-8000-000000000000
[     1.514156] dk0 at ld0: "EFI", 163840 blocks at 32768, type: msdos
[     1.514156] dk1 at ld0: "netbsd-root", 62316544 blocks at 196608, type: ffs
[     1.529851] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
[     1.624164] sdmmc1: 4-bit width, 50.000 MHz
[     1.624164] bwfm0 at sdmmc1 function 1
[     1.634164] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured
[     2.034193] uhub1 at uhub0 port 1: vendor 0424 (0x0424) product 9514 (0x9514), class 9/0, rev 2.00/2.00, addr 2
[     2.044194] uhub1: multiple transaction translators
[     2.054195] uhub1: 5 ports with 4 removable, self powered
[     2.894256] usmsc0 at uhub1 port 1
[     2.904256] usmsc0: vendor 0424 (0x0424) product ec00 (0xec00), rev 2.00/2.00, addr 3
[     2.914257] smscphy0 at usmsc0 phy 1: SMSC LAN8700 10/100 Ethernet Transceiver, rev. 3
[     2.924257] smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     2.934259] usmsc0: Ethernet address b8:27:eb:6a:20:4b
[     3.444293] umass0 at uhub1 port 4 configuration 1 interface 0
[     3.454294] umass0: Samsung (0x04e8) Flash Drive (0x6300), rev 2.10/11.00, addr 4
[     3.464294] umass0: using SCSI over Bulk-Only
[     3.514298] scsibus0 at umass0: 2 targets, 1 lun per target
[     3.514298] uhub0: autoconfiguration error: illegal enable change, port 1
[     4.184346] sd0 at scsibus0 target 0 lun 0: <Samsung, Flash Drive, 1100> disk removable
[     4.194351] sd0: fabricating a geometry
[     4.194351] sd0: 61188 MB, 61188 cyl, 64 head, 32 sec, 512 bytes/sect x 125313283 sectors
[     4.204348] sd0: fabricating a geometry
[     4.214350] swwdog0: software watchdog initialized
[     4.224349] WARNING: 3 errors while detecting hardware; check system log.
[     4.234351] boot device: ld0
[     4.234351] root on dk1
[     4.244351] root file system type: ffs
[     4.254352] kern.module.path=/stand/evbarm/11.0/modules
[     4.264352] WARNING: no TOD clock present
[     4.264352] vchiq0: interrupting on icu irq 66
[     4.264352] WARNING: using filesystem time
[     4.264352] vchiq: vchiq_init_state: slot_zero = 0xffffc000b1608000, is_master = 0
[     4.277456] WARNING: CHECK AND RESET THE DATE!
[     4.277499] vchiq: local ver 8 (min 3), remote ver 8.
[     4.277499] vcaudio0 at vchiq0: auds
[     4.284987] bwfm0: Firmware file default:    brcmfmac43430-sdio.bin
[     4.284987] bwfm0: Firmware file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.bin
[     4.284987] audio0 at vcaudio0: playback
[     4.284987] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback
[     4.303157] spkr0 at audio0: PC Speaker (synthesized)
[     4.303157] wsbell at spkr0 not configured
[     4.323156] bwfm0: Found Firmware file: brcmfmac43430-sdio.bin
[     4.343157] bwfm0: NVRAM file default:    brcmfmac43430-sdio.txt
[     4.343157] bwfm0: NVRAM file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.txt
[     4.343157] bwfm0: Found NVRAM file: brcmfmac43430-sdio.raspberrypi,3-model-b.txt
[     4.343157] bwfm0: CLM file default:    brcmfmac43430-sdio.clm_blob
[     4.343157] bwfm0: CLM file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.clm_blob
[     5.663257] bwfm0: CHIPACTIVE
[     5.763264] bwfm0: address b8:27:eb:3f:75:1e
[     5.773265] bwfm0: wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[    40.166083] wsdisplay0: screen 4 added (default, vt100 emulation)


dmesg from FAILED usb stick boot attempt:


[ 1.0000000] NetBSD/evbarm (fdt) booting ... 
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 
[ 1.0000000] 2024, 2025, 2026 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. 
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 
[ 1.0000000] The Regents of the University of California. All rights reserved. 
[ 1.0000000] NetBSD 11.0_RC1 (GENERIC64) #0: Fri Feb 6 08:24:25 UTC 2026 [ 1.0000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/evbarm/compile/GENERIC64 
[ 1.0000000] total memory = 930 MB [ 1.0000000] avail memory = 895 MB [ 1.0000000] armfdt0 (root) 
[ 1.0000000] simplebus0 at armfdt0: Raspberry Pi 3 Model B Rev 1.2 
[ 1.0000000] simplebus1 at simplebus0 [ 1.0000000] simplebus2 at simplebus0 
[ 1.0000000] cpus0 at simplebus0 [ 1.0000000] simplebus3 at simplebus0 [ 1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0 
[ 1.0000000] cpu0: package 0, core 0, smt 0, numa 0 [ 1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1 
[ 1.0000000] cpu1: package 0, core 1, smt 0, numa 0 
[ 1.0000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2 
[ 1.0000000] cpu2: package 0, core 2, smt 0, numa 0 [ 1.0000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3 
[ 1.0000000] cpu3: package 0, core 3, smt 0, numa 0 
[ 1.0000000] bcmicu0 at simplebus1 [ 1.0000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc) 
[ 1.0000000] bcmcprman0 at simplebus1: BCM283x Clock Controller 
[ 1.0000000] syscon0 at simplebus1: couldn't get registers [ 1.0000000] bcmaux0 at simplebus1 
[ 1.0000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg) 
[ 1.0000000] bcmicu1 at simplebus1: Multiprocessor [ 1.0000000] gtmr0 at simplebus0: Generic Timer 
[ 1.0000000] gtmr0: interrupting on local_intc irq 3 
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (19200 kHz, virtual) 
[ 1.0000040] bcmgpio0 at simplebus1: GPIO controller 2835 [ 1.0000040] bcmgpio0: pins 0..31 interrupting on icu irq 49 
[ 1.0000040] bcmgpio0: pins 32..54 interrupting on icu irq 50 
[ 1.0000040] gpio0 at bcmgpio0: 54 pins [ 1.0000040] plcom0 at simplebus1: ARM PL011 UART 
[ 1.0000040] plcom0: txfifo 16 bytes 
[ 1.0000040] plcom0: interrupting on icu irq 57 
[ 1.0000040] com0 at simplebus1: BCM AUX UART, 1-byte FIFO 
[ 1.0000040] com0: console [ 1.0000040] com0: interrupting on icu irq 29, clock 800000000 Hz 
[ 1.0000040] mmcpwrseq0 at simplebus0: couldn't get reset GPIOs 
[ 1.0000040] /soc/thermal@7e212000 at simplebus1 not configured [ 1.0000040] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 DMA11 
[ 1.0000040] /soc/power at simplebus1 not configured [ 1.0000040] /phy at simplebus0 not configured 
[ 1.0000040] bsciic0 at simplebus1: Broadcom Serial Controller 
[ 1.0000040] bsciic0: interrupting on icu irq 53 [ 1.0000040] iic0 at bsciic0: I2C bus 
[ 1.0000040] bcmmbox0 at simplebus1: VC mailbox 
[ 1.0000040] bcmmbox0: interrupting on icu irq 65 
[ 1.0000040] vcmbox0 at bcmmbox0 [ 1.0000040] /soc/timer@7e003000 at simplebus1 not configured 
[ 1.0000040] /soc/txp@7e004000 at simplebus1 not configured 
[ 1.0000040] bcmsdhost0 at simplebus1: SD HOST controller [ 1.0000040] bcmsdhost0: interrupting on icu irq 56 
[ 1.0000040] bsciic1 at simplebus1: Broadcom Serial Controller 
[ 1.0000040] bsciic1: interrupting on icu irq 53 [ 1.0000040] iic1 at bsciic1: I2C bus 
[ 1.0000040] /soc/pwm@7e20c000 at simplebus1 not configured 
[ 1.0000040] sdhc0 at simplebus1: SDHC controller [ 1.0000040] sdhc0: interrupting on icu irq 62 
[ 1.0000040] bsciic2 at simplebus1: Broadcom Serial Controller 
[ 1.0000040] bsciic2: interrupting on icu irq 53 [ 1.0000040] iic2 at bsciic2: I2C bus 
[ 1.0000040] dwctwo0 at simplebus1: USB controller 
[ 1.0000040] dwctwo0: interrupting on icu irq 9 [ 1.0000040] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller 
[ 1.0000040] /soc/vec@7e806000 at simplebus1 not configured 
[ 1.0000040] /soc/hdmi@7e902000 at simplebus1 not configured [ 1.0000040] /soc/gpu at simplebus1 not configured 
[ 1.0000040] genfb0 at simplebus1: switching to framebuffer console 
[ 1.0000040] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) 
[ 1.0000040] vchiq0 at simplebus1: BCM2835 VCHIQ [ 1.0000040] armpmu0 at simplebus0: Performance Monitor Unit 
[ 1.0000040] gpioleds0 at simplebus0: 
[ 1.0000040] bcmrng0 at simplebus1: RNG 
[ 1.0000040] entropy: ready [ 1.3276864] sdmmc0 at bcmsdhost0 
[ 1.3376880] sdhc0: SDHC 3.0, rev 153, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks 
[ 1.3476881] sdmmc1 at sdhc0 slot 0 
[ 1.3676894] usb0 at dwctwo0: USB revision 2.0 
[ 1.3876912] armpmu0: interrupting on local_intc irq 9 
[ 1.3876912] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 
[ 1.4776999] sdmmc0: direct I/O error 5, r=6 p=0xffffc000b14fce5c write 
[ 1.4877014] sdmmc0: couldn't enable card: 5 [ 1.5977105] sdmmc1: 4-bit width, 50.000 MHz 
[ 1.5977105] bwfm0 at sdmmc1 function 1 
[ 1.6077105] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured 
[ 1.6177115] swwdog0: software watchdog initialized 
[ 1.6177115] WARNING: 3 errors while detecting hardware; check system log. 
[ 1.6277118] boot device: <unknown> 
[ 1.6277118] unknown device major 0xffffffffffffffff 
[ 2.6277792] unknown device major 0xffffffffffffffff 
[ 3.6278463] unknown device major 0xffffffffffffffff 
[ 4.6279139] unknown device major 0xffffffffffffffff 
[ 5.6279809] unknown device major 0xffffffffffffffff 
[ 6.6280471] unknown device major 0xffffffffffffffff 
[ 7.6281136] unknown device major 0xffffffffffffffff 
[ 8.6281796] unknown device major 0xffffffffffffffff 
[ 9.6282456] unknown device major 0xffffffffffffffff 
[ 10.6283119] unknown device major 0xffffffffffffffff 
[ 11.6283785] unknown device major 0xffffffffffffffff 
[ 12.6284449] unknown device major 0xffffffffffffffff 
[ 13.6285113] unknown device major 0xffffffffffffffff 
[ 14.6285777] unknown device major 0xffffffffffffffff 
[ 15.6286439] unknown device major 0xffffffffffffffff 
[ 16.6287103] unknown device major 0xffffffffffffffff 
[ 17.6287768] unknown device major 0xffffffffffffffff 
[ 18.6288429] unknown device major 0xffffffffffffffff 
[ 19.6289094] unknown device major 0xffffffffffffffff 
[ 20.6289757] unknown device major 0xffffffffffffffff 
[ 21.6290416] unknown device major 0xffffffffffffffff 
[ 21.6290416] root device:


>Fix:

Unknown
>Unformatted:
 ne
         
         
 NetBSD arm64 11.0_RC1 NetBSD 11.0_RC1 (GENERIC64) #0: Fri Feb  6 08:24:25 UTC 2026  mkrepro%mkrepro.NetBSD.org@localhost:/usr\
 /src/sys/arch/evbarm/compile/GENERIC64 evbarm
Prev by Date: kern/60020: Using ipf -D -T -E crashes the kernel
Next by Date: PR/60004 CVS commit: src/external/cddl/osnet/dist/uts/common/fs/zfs
Previous by Thread: kern/60020: Using ipf -D -T -E crashes the kernel
Next by Thread: PR/60004 CVS commit: src/external/cddl/osnet/dist/uts/common/fs/zfs
Indexes:
Home | Main Index | Thread Index | Old Index