Re: port-sgimips/58269

To: port-sgimips-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,tmcintos%eskimo.com@localhost
Subject: Re: port-sgimips/58269
From: <iwama%t3.rim.or.jp@localhost>
Date: Tue, 21 May 2024 21:00:03 +0000 (UTC)
The following reply was made to PR port-sgimips/58269; it has been noted by GNATS.

From: <iwama%t3.rim.or.jp@localhost>
To: <gnats-bugs%NetBSD.org@localhost>
Cc: 
Subject: Re: port-sgimips/58269
Date: Wed, 22 May 2024 04:41:28 +0900

   I had a similar problem on Indy with NetBSD-9.3.
 
 >> hinv
                    System: IP22
                 Processor: 200 Mhz R4400, with FPU
      Primary I-cache size: 16 Kbytes
      Primary D-cache size: 16 Kbytes
      Secondary cache size: 1024 Kbytes
               Memory size: 256 Mbytes
                  Graphics: Indy 24-bit
                 SCSI Disk: scsi(0)disk(1)
                 SCSI Disk: scsi(0)disk(2)
                 SCSI Disk: scsi(0)disk(3)
                SCSI CDROM: scsi(0)cdrom(6)
                     Audio: Iris Audio Processor: version A2 revision 4.1.0
 >> boot
 
 NetBSD/sgimips 9.3 Bootstrap, Revision 1.5 (Thu Aug  4 15:30:37 UTC 2022)
 
 devopen: scsi(0)disk(3)rdisk(0)partition(0) type scsi file netbsd.ecoff
 4929840+127440=0x4b3930
 [   1.0000000] [ Kernel symbol table invalid! ]
 [   1.0000000] phys segment: 0xe000 @ 0x8002000
 [   1.0000000] adding 0xe000 @ 0x8002000 to freelist 0
 [   1.0000000] phys segment: 0x730000 @ 0x8010000
 [   1.0000000] adding 0x58000 @ 0x8010000 to freelist 0
 [   1.0000000] adding 0x22c000 @ 0x8514000 to freelist 0
 [   1.0000000] phys segment: 0xf800000 @ 0x8800000
 [   1.0000000] adding 0xf800000 @ 0x8800000 to freelist 0
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
 2015, 2016, 2017,
 [   1.0000000]     2018, 2019, 2020, 2021, 2022
 [   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights
 reserved.
 
 [   1.0000000] NetBSD 9.3 (GENERIC32_IP2x) #0: Thu Aug  4 15:30:37 UTC 2022
 [   1.0000000]
 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/sgimips/compile/GENERIC32_IP2x
 [   1.0000000] total memory = 256 MB
 [   1.0000000] (768 KB reserved for ARCS)
 [   1.0000000] avail memory = 245 MB
 [   1.0000000] WARNING: module error: built-in module sequencer can't find
 builtin dependency `midi'
 [   1.0000000] WARNING: module error: built-in module sequencer prerequisite
 midi failed, error 2
 [   1.0000000] mainbus0 (root): SGI-IP22 [SGI, 6909c4ea], 1 processor
 [   1.0000000] cpu0 at mainbus0: MIPS R4400 CPU (0x460) Rev. 6.0 with MIPS
 R4010 FPC Rev. 0.0
 [   1.0000000] cpu0: 48 TLB entries, 16MB max page size
 [   1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache
 [   1.0000000] cpu0: 16KB/16B direct-mapped write-back L1 data cache
 [   1.0000000] cpu0: 1024KB/128B direct-mapped write-back L2 unified cache
 [   1.0000000] int0 at mainbus0 addr 0x1fbd9880
 [   1.0000000] int0: bus 100MHz, CPU 200MHz
 [   1.0000000] imc0 at mainbus0 addr 0x1fa00000: revision 3
 [   1.0000000] gio0 at imc0
 [   1.0000000] newport0 at gio0: SGI NG1 (board revision 1, cmap revision 5,
 xmap revision 5, vc2 revision 0), depth 24
 [   1.0000000] wsdisplay0 at newport0 kbdmux 1
 [   1.0000000] hpc0 at gio0: SGI HPC3 (onboard)
 [   1.0000000] zsc0 at hpc0 offset 0x59830
 [   1.0000000] zstty0 at zsc0 channel 1 (console i/o)
 [   1.0000000] zstty1 at zsc0 channel 0
 [   1.0000000] pckbc0 at hpc0 offset 0x59840
 [   1.0000000] pckbd0 at pckbc0 (kbd slot)
 [   1.0000000] wskbd0 at pckbd0 mux 1
 [   1.0000000] pms0 at pckbc0 (aux slot)
 [   1.0000000] wsmouse0 at pms0 mux 0
 [   1.0000000] sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
 [   1.0000000] sq0: Ethernet address 08:00:69:09:c4:ea
 [   1.0000000] wdsc0 at hpc0 offset 0x44000: WD33C93B (20.0 MHz clock, BURST
 DMA, SCSI ID 0)
 [   1.0000000] wdsc0: microcode revision 0x0d, Fast SCSI
 [   1.0000000] scsibus0 at wdsc0: 8 targets, 8 luns per target
 [   1.0000000] haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
 [   1.0000000] audio0 at haltwo0: playback
 [   1.0000000] audio0: slinear_be:16 2ch 48000Hz, blk 4096 bytes (21.3ms)
 for playback
 [   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
 [   1.0000000] wsbell at spkr0 not configured
 [   1.0000000] pi1ppc0 at hpc0 offset 0x59800
 [   1.0000000] pi1ppc0: capabilities=0x8<PS2>
 [   1.0000000] ppbus0 at pi1ppc0
 [   1.0000000] ppbus0: No IEEE1284 device found.
 [   1.0000000] lpt0 at ppbus0: port mode = 0x1<COMPATIBLE>
 [   1.0000000] button0 at hpc0 offset 0x59850
 [   1.0000000] dsclock0 at mainbus0 addr 0x1fbe0000
 [   1.0000000] ioc0 at mainbus0 addr 0x1fbd9800: rev 0, machine Indy
 (Guinness), board rev 0
 [   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
 [   1.0687213] sysctl: log 0x27bdffd8 root mismatch (0x8850c150)
 [   1.2677407] pid 0(system): trap: cpu0, TLB miss (load or instr. fetch) in
 kernel mode
 [   1.2677407] status=0x4ff03, cause=0x8, epc=0x88428100, vaddr=0
 [   1.2677407] tf=0x88003c40 ksp=0x88003ce0 ra=0x88335f28 ppl=0x8850c81c
 [   1.2677407] kernel: TLB miss (load or instr. fetch) trap
 Stopped in pid 0.1 (system) at  88428100:       lbu     t0,0(a0)
 db> 
 
 >> boot
 
 NetBSD/sgimips 9.3 Bootstrap, Revision 1.5 (Thu Aug  4 15:30:37 UTC 2022)
 
 devopen: scsi(0)disk(3)rdisk(0)partition(0) type scsi file netbsd
 4929840+127440 [285568+277831]=0x55ca10
 
 Exception: <vector=UTLB Miss>
 Status register: 0x2<IPL=8,MODE=KERNEL,EXL>
 Cause register: 0x30008008<CE=3,IP8,EXC=RMISS>
 Exception PC: 0x0, Exception RA: 0x882f12cc
 exception, bad address: 0x0
 Local I/O interrupt register 1: 0x80 <VR/GIO2>
 Local I/O interrupt register 2: 0x4 <>
   Saved user regs in hex (&gpda 0xa8740e48, &_regs 0xa8741048):
   arg: a8740000 5f 0 2
   tmp: a8740000 27c0 41ef 88578cc8 88578cc8 88575028 88578cc8 4
   sve: a8740000 0 0 0 0 0 0 0
   t8 a8740000 t9 0 at 0 v0 0 v1 0 k1 88510000
   gp a8740000 fp 0 sp 0 ra 0
 
 PANIC: Unexpected exception
 
 [Press reset or ENTER to restart.]
 
   I get around this problem by putting the kernel in IRIX's / partition and
 starting it using sash.
 
 >> boot -f scsi(0)disk(1)rdisk(0)partition(8)sash
 scsi(0)disk(1)rdisk(0)partition(0)NetBSD/netbsd
 136336+22752+3248+341792+49344d+4620+6880 entry: 0x97fa5ee0
 [   1.0000000] phys segment: 0x73e000 @ 0x8002000
 [   1.0000000] adding 0x66000 @ 0x8002000 to freelist 0
 [   1.0000000] adding 0x20d000 @ 0x8533000 to freelist 0
 [   1.0000000] phys segment: 0xf784000 @ 0x8800000
 [   1.0000000] adding 0xf784000 @ 0x8800000 to freelist 0
 [   1.0000000] phys segment: 0x7c000 @ 0x17f84000
 [   1.0000000] adding 0x7c000 @ 0x17f84000 to freelist 0
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
 2015, 2016, 2017,
 [   1.0000000]     2018, 2019, 2020, 2021, 2022
 [   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights
 reserved.
 
 [   1.0000000] NetBSD 9.3 (GENERIC32_IP2x) #0: Thu Aug  4 15:30:37 UTC 2022
 [   1.0000000]
 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/sgimips/compile/GENERIC32_IP2x
 [   1.0000000] total memory = 256 MB
 [   1.0000000] (768 KB reserved for ARCS)
 [   1.0000000] avail memory = 245 MB
 [   1.0000000] WARNING: module error: built-in module sequencer can't find
 builtin dependency `midi'
 [   1.0000000] WARNING: module error: built-in module sequencer prerequisite
 midi failed, error 2
 [   1.0000000] mainbus0 (root): SGI-IP22 [SGI, 6909c4ea], 1 processor
 [   1.0000000] cpu0 at mainbus0: MIPS R4400 CPU (0x460) Rev. 6.0 with MIPS
 R4010 FPC Rev. 0.0
 [   1.0000000] cpu0: 48 TLB entries, 16MB max page size
 [   1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache
 [   1.0000000] cpu0: 16KB/16B direct-mapped write-back L1 data cache
 [   1.0000000] cpu0: 1024KB/128B direct-mapped write-back L2 unified cache
 [   1.0000000] int0 at mainbus0 addr 0x1fbd9880
 [   1.0000000] int0: bus 100MHz, CPU 200MHz
 [   1.0000000] imc0 at mainbus0 addr 0x1fa00000: revision 3
 [   1.0000000] gio0 at imc0
 [   1.0000000] newport0 at gio0: SGI NG1 (board revision 1, cmap revision 5,
 xmap revision 5, vc2 revision 0), depth 24
 [   1.0000000] wsdisplay0 at newport0 kbdmux 1
 [   1.0000000] hpc0 at gio0: SGI HPC3 (onboard)
 [   1.0000000] zsc0 at hpc0 offset 0x59830
 [   1.0000000] zstty0 at zsc0 channel 1 (console i/o)
 [   1.0000000] zstty1 at zsc0 channel 0
 [   1.0000000] pckbc0 at hpc0 offset 0x59840
 [   1.0000000] pckbd0 at pckbc0 (kbd slot)
 [   1.0000000] wskbd0 at pckbd0 mux 1
 [   1.0000000] pms0 at pckbc0 (aux slot)
 [   1.0000000] wsmouse0 at pms0 mux 0
 [   1.0000000] sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
 [   1.0000000] sq0: Ethernet address 08:00:69:09:c4:ea
 [   1.0000000] wdsc0 at hpc0 offset 0x44000: WD33C93B (20.0 MHz clock, BURST
 DMA, SCSI ID 0)
 [   1.0000000] wdsc0: microcode revision 0x0d, Fast SCSI
 [   1.0000000] scsibus0 at wdsc0: 8 targets, 8 luns per target
 [   1.0000000] haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
 [   1.0000000] audio0 at haltwo0: playback
 [   1.0000000] audio0: slinear_be:16 2ch 48000Hz, blk 4096 bytes (21.3ms)
 for playback
 [   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
 [   1.0000000] wsbell at spkr0 not configured
 [   1.0000000] pi1ppc0 at hpc0 offset 0x59800
 [   1.0000000] pi1ppc0: capabilities=0x8<PS2>
 [   1.0000000] ppbus0 at pi1ppc0
 [   1.0000000] ppbus0: No IEEE1284 device found.
 [   1.0000000] lpt0 at ppbus0: port mode = 0x1<COMPATIBLE>
 [   1.0000000] button0 at hpc0 offset 0x59850
 [   1.0000000] dsclock0 at mainbus0 addr 0x1fbe0000
 [   1.0000000] ioc0 at mainbus0 addr 0x1fbd9800: rev 0, machine Indy
 (Guinness), board rev 0
 [   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
 [   1.2088050] WARNING: module error: built-in module sequencer can't find
 builtin dependency `midi'
 [   1.3101469] WARNING: module error: built-in module sequencer prerequisite
 midi failed, error 2
 [   3.2436803] sd0 at scsibus0 target 1 lun 0: <SEAGATE, ST32151N, 0560>
 disk fixed
 [   3.3263428] sd0: 2047 MB, 4177 cyl, 8 head, 125 sec, 512 bytes/sect x
 4193415 sectors
 [   3.4321276] sd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers,
 tagged queueing
 [   3.7877606] sd1 at scsibus0 target 3 lun 0: <IBM, DCAS-34330, S65A> disk
 fixed
 [   3.9309688] sd1: 4134 MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x
 8467200 sectors
 [   4.0206096] sd1: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers,
 tagged queueing
 [   5.1310107] boot device: sd0
 [   5.2064352] root on sd0a dumps on sd0b
 [   5.3824257] Supported file systems: mfs lfs ffs ext2fs nfs umap procfs
 overlay null kernfs fdesc union tmpfs smbfs puffs ptyfs ntfs msdos efs
 cd9660 coda
 [   5.5436282] no file system for sd0 (dev 0xa00)
 [   5.5969633] cannot mount root, error = 79
 [   5.6471580] root device (default sd0a): sd1a
 [   8.3478937] dump device (default sd1b): 
 [   9.2727785] file system (default generic): 
 [  10.0228762] root on sd1a dumps on sd1b
 [  10.1570741] root file system type: ffs
 [  10.2054057] kern.module.path=/stand/sgimips/9.3/modules
 [  10.3081482] init path (default /sbin/init): 
 [  10.8837101] init: trying /sbin/init
 Enter pathname of shell or RETURN for /bin/sh: 
 We recommend that you create a non-root account and use su(1) for root
 access.
 #
 -- 
 Yoshihiko Iwama
Prev by Date: NetBSD Nightly Trouble Ticket Report
Next by Date: Re: port-sgimips/58269
Previous by Thread: toolchain/58271: external/gpl3/gcc/dist/gcc/system.h: Early inclusion of "safe-type.h" causes toolchain build failure on macOS 14.5
Next by Thread: Re: port-sgimips/58269
Indexes:
Home | Main Index | Thread Index | Old Index