NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kern/56608: i915drmkms0: info: [drm] Cannot find any crtc or sizes
The following reply was made to PR kern/56608; it has been noted by GNATS.
From: "John D. Baker" <jdbaker%consolidated.net@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc:
Subject: Re: kern/56608: i915drmkms0: info: [drm] Cannot find any crtc or
sizes
Date: Thu, 26 May 2022 10:00:09 -0500 (CDT)
On Thu, 26 May 2022, John D. Baker wrote:
> Will test other intel-graphics systems when I am able.
A system with an i82946 chip set and integrated graphics works.
(The font chosen for the console is ridiculously large, resulting
in a 64x24 display and attempts to change it fail, but that's not
related to the issue in this PR.)
> Would be nice if the Q45-based system will be able to boot with the
> display turned off.
The machine still hangs if the display (attached via DisplayPort) is
turned off. The only way out is to power-cycle the machine. I'll see
if I can arrange for serial console, but I suspect it will be inconclusive
as historically, i915drmkms doesn't initialize at all if the console is
on the serial port, even if wscons and related ttyEn are enabled.
The machine also has VGA, so maybe it changes behavior if the displayport
display were not connected at all and/or the VGA port is used and the
display is turned off?
I'll see about checking other intel-graphics machines that don't have
DisplayPort to see how they behave with no monitor connected or monitor
connected but turned off.
--
|/"\ John D. Baker, KN5UKS NetBSD Darwin/MacOS X
|\ / jdbaker[snail]consolidated[flyspeck]net OpenBSD FreeBSD
| X No HTML/proprietary data in email. BSD just sits there and works!
|/ \ GPGkeyID: D703 4A7E 479F 63F8 D3F4 BD99 9572 8F23 E4AD 1645
Home |
Main Index |
Thread Index |
Old Index