Re: port-macppc/52712: Graphics corruption with Radeon 9600 card with or without radeonfb

To: port-macppc-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,venture37%geeklan.co.uk@localhost
Subject: Re: port-macppc/52712: Graphics corruption with Radeon 9600 card with or without radeonfb
From: Sevan Janiyan <venture37%geeklan.co.uk@localhost>
Date: Fri, 10 Nov 2017 17:35:01 +0000 (UTC)
The following reply was made to PR port-macppc/52712; it has been noted by GNATS.

From: Sevan Janiyan <venture37%geeklan.co.uk@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-macppc/52712: Graphics corruption with Radeon 9600 card with
 or without radeonfb
Date: Fri, 10 Nov 2017 17:30:37 +0000

 dmesg from latest kernel.
 
 FFWDDAQcBMAQdYQAAAYAAAA/gBMVE4xNTJXMwAAAAogAAAA/gBMVE4xNTJXMwAAAAogAAAA/ABDb2xvciBMQ0QKICAgAAs=</data>
 	<key>address</key>
 	<integer>0xbc008000</integer>
 	<key>backlight_callback</key>
 	<integer>0xa76d48</integer>
 	<key>brightness_callback</key>
 	<integer>0xa76d58</integer>
 	<key>cmap_callback</key>
 	<integer>0xa76d40</integer>
 	<key>depth</key>
 	<integer>0x8</integer>
 	<key>device-driver</key>
 	<string>radeonfb</string>
 	<key>device-parent</key>
 	<string>pci0</string>
 	<key>device-unit</key>
 	<integer>0x0</integer>
 	<key>device_node</key>
 	<integer>0xff9bf330</integer>
 	<key>height</key>
 	<integer>0x356</integer>
 	<key>interface-attributes</key>
 	<array>
 		<dict>
 			<key>attribute-name</key>
 			<string>drm</string>
 		</dict>
 		<dict>
 			<key>attribute-name</key>
 			<string>i2cbus</string>
 		</dict>
 		<dict>
 			<key>attribute-name</key>
 			<string>wsemuldisplaydev</string>
 			<key>locators</key>
 			<array>
 				<dict>
 					<key>default</key>
 					<string>-1</string>
 					<key>loc-name</key>
 					<string>console</string>
 				</dict>
 				<dict>
 					<key>default</key>
 					<string>1</string>
 					<key>loc-name</key>
 					<string>kbdmux</string>
 				</dict>
 			</array>
 		</dict>
 	</array>
 	<key>is_console</key>
 	<true/>
 	<key>linebytes</key>
 	<integer>0x500</integer>
 	<key>refclk</key>
 	<integer>0xa8c</integer>
 	<key>width</key>
 	<integer>0x500</integer>
 
 
 found RV* chip, backlight is supposedly linear
 RADEON_CRTC_EXT_CNTL = 00000000
 RADEON_CRTC_GEN_CNTL = 03000200
 RADEON_CRTC2_GEN_CNTL = 06700100
 RADEON_DISP_OUTPUT_CNTL = 00000000
 RADEON_DAC_CNTL2 = 00000000
 RADEON_BIOS_4_SCRATCH = 00000000
 RADEON_FP_GEN_CNTL = 00034048
 RADEON_FP2_GEN_CNTL = 01000008
 RADEON_TMDS_CNTL = 01000000
 RADEON_TMDS_TRANSMITTER_CNTL = 00000082
 RADEON_TMDS_PLL_CNTL = 000bffdd
 RADEON_LVDS_GEN_CNTL = 000d69a1
 RADEON_DISP_HW_DEBUG = 00000000
 RADEON_PIXCLKS_CNTL = 30000000
 RADEON_CRTC_H_SYNC_STRT_WID = 008e0510
 RADEON_FP_H_SYNC_STRT_WID = 008e0010
 RADEON_CRTC2_H_SYNC_STRT_WID = 00000000
 RADEON_FP_H2_SYNC_STRT_WID = 00000000
 radeonfb0: Video BIOS not present
 RADEON_PPLL_REF_DIV = 0000000c
 RADEON_PPLL_DIV_0 = 0002008e
 RADEON_PPLL_DIV_1 = 000001f2
 RADEON_PPLL_DIV_2 = 000001bb
 RADEON_PPLL_DIV_3 = 000001bb
 RADEON_CLOCK_CNTL_INDEX = 00000007
 RADEON_P2PLL_REF_DIV = 00000000
 RADEON_P2PLL_DIV_0 = 00000000
 radeonfb0: No video BIOS, using default clocks
 no suitable DFP table present
 TMDS_PLL dot clock 15000 pll b0155
 TMDS_PLL dot clock -1 pll b01cb
 TMDS_PLL dot clock 0 pll 0
 TMDS_PLL dot clock 0 pll 0
 radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
 No connector info in BIOS!
 Port #0:
    conn = 4
     ddc = 2
     dac = 1
    tmds = 0
    crtc = 0
 Port #1:
    conn = 2
     ddc = 3
     dac = 0
    tmds = 1
    crtc = 1
 aperbase = 3087007744
 RADEON_MC_FB_LOCATION = bbffb800
 RADEON_MC_AGP_LOCATION = bbffbc00
 radeonfb_attach: port 0 tmds type 0
 radeonfb_attach: plugging internal TMDS into CRTC 0
 radeonfb_attach: port 1 tmds type 1
 radeonfb_attach: plugging external TMDS into CRTC 1
 RADEON_DAC_CNTL2 = 00000002
 RADEON_DISP_HW_DEBUG = 00000020
 RADEON_DAC_CNTL = ff60410a
 RADEON_DAC_CNTL = ff000102
 RADEON_TV_DAC_CNTL = 00280203
 radeonfb0: 64 MB aperture at 0xb8000000, 64 KB registers at 0xb0000000
 dual crtcs!
 radeonfb0: display 0: initial virtual resolution 1280x854 at 8 bpp
 radeonfb0: using 32 MB per display
 radeonfb0: port 0: physical 1280x854 60Hz
 radeonfb0: port 1: physical 1280x854 60Hz
 stride: 1280
 fpbtr = 0xb8000000
 init engine
 RADEON_CLOCK_CNTL_INDEX = 0000002c
 init screen called, existing 1
 RADEON_FP_GEN_CNTL = 000340cc
 RADEON_FP2_GEN_CNTL = 01000408
 CRTC_GEN_CNTL = 03000200
 RADEON_CRTC_EXT_CNTL = 00008448
 CRTC_H_TOTAL_DISP = 009f00bf
 FP_H_TOTAL_DISP = 009f00bf
 CRTC_H_SYNC_STRT_WID = 008e0508
 FP_H_SYNC_STRT_WID = 008e0508
 CRTC_V_TOTAL_DISP = 03550361
 FP_V_TOTAL_DISP = 03550361
 CRTC_V_SYNC_STRT_WID = 00830356
 FP_V_SYNC_STRT_WID = 00830356
 dot clock: 79810
 outfreq: 319240
 post divider: 4 (mask 20000)
 feedback divider: 142
 RADEON_PPLL_CNTL = 0000bc30
 RADEON_PPLL_REF_DIV = 0030000c
 RADEON_PPLL_DIV_3 = 000001bb
 RADEON_CRTC_MORE_CNTL = 00000000
 RADEON_CRTC_EXT_CNTL = 00008048
 RADEON_CRTC_GEN_CNTL = 03000200
 RADEON_CLOCK_CNTL_INDEX = 00000000
 CRTC2_GEN_CNTL = 02000280
 RADEON_CRTC_EXT_CNTL = 00008048
 CRTC2_H_TOTAL_DISP = 009f00bf
 CRTC2_H_SYNC_STRT_WID = 008e0508
 FP_H2_SYNC_STRT_WID = 008e0508
 CRTC2_V_TOTAL_DISP = 03550361
 CRTC2_V_SYNC_STRT_WID = 00830356
 FP_V2_SYNC_STRT_WID = 00830356
 dot clock: 79810
 outfreq: 319240
 post divider: 4 (mask 20000)
 feedback divider: 142
 RADEON_P2PLL_REF_DIV = 0000000c
 RADEON_P2PLL_DIV_0 = 0002008e
 RADEON_CRTC_MORE_CNTL = 00000000
 RADEON_CRTC2_GEN_CNTL = 02000280
 RADEON_FP_GEN_CNTL = 000340cd
 RADEON_FP2_GEN_CNTL = 0100040c
 RADEON_FP_GEN_CNTL = 000340cc
 RADEON_FP2_GEN_CNTL = 01000408
 CRTC_GEN_CNTL = 03000200
 RADEON_CRTC_EXT_CNTL = 00008448
 CRTC_H_TOTAL_DISP = 009f00bf
 FP_H_TOTAL_DISP = 009f00bf
 CRTC_H_SYNC_STRT_WID = 008e0508
 FP_H_SYNC_STRT_WID = 008e0508
 CRTC_V_TOTAL_DISP = 03550361
 FP_V_TOTAL_DISP = 03550361
 CRTC_V_SYNC_STRT_WID = 00830356
 FP_V_SYNC_STRT_WID = 00830356
 dot clock: 79810
 outfreq: 319240
 post divider: 4 (mask 20000)
 feedback divider: 142
 RADEON_CRTC_EXT_CNTL = 00008048
 RADEON_CRTC_GEN_CNTL = 03000200
 RADEON_CLOCK_CNTL_INDEX = 00000004
 CRTC2_GEN_CNTL = 02000280
 RADEON_CRTC_EXT_CNTL = 00008048
 CRTC2_H_TOTAL_DISP = 009f00bf
 CRTC2_H_SYNC_STRT_WID = 008e0508
 FP_H2_SYNC_STRT_WID = 008e0508
 CRTC2_V_TOTAL_DISP = 03550361
 CRTC2_V_SYNC_STRT_WID = 00830356
 FP_V2_SYNC_STRT_WID = 00830356
 dot clock: 79810
 outfreq: 319240
 post divider: 4 (mask 20000)
 feedback divider: 142
 RADEON_P2PLL_REF_DIV = 0000000c
 RADEON_P2PLL_DIV_0 = 0002008e
 RADEON_CRTC_MORE_CNTL = 00000000
 RADEON_CRTC2_GEN_CNTL = 02000280
 RADEON_FP_GEN_CNTL = 000340cd
 RADEON_FP2_GEN_CNTL = 0100040c
 wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 RADEON_FP_GEN_CNTL = 000340cd
 RADEON_FP2_GEN_CNTL = 0100040c
 drm at radeonfb0 not configured
 needs_unmap: 0
 RADEON_CRTC_EXT_CNTL = 00008048
 RADEON_CRTC_GEN_CNTL = 03000200
 RADEON_CRTC2_GEN_CNTL = 02000280
 RADEON_DISP_OUTPUT_CNTL = 00000000
 RADEON_DAC_CNTL2 = 00000022
 RADEON_FP_GEN_CNTL = 000340cd
 RADEON_FP2_GEN_CNTL = 0100040c
 RADEON_TMDS_CNTL = 01000000
 RADEON_TMDS_TRANSMITTER_CNTL = 00000080
 RADEON_TMDS_PLL_CNTL = 000bffdd
 RADEON_PIXCLKS_CNTL = 40000000
 uninorth1 at mainbus0
 pci1 at uninorth1 bus 0
 pci1: i/o space, memory space enabled
 pchb1 at pci1 dev 11 function 0
 pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
 bwi0 at pci1 dev 18 function 0: Broadcom Wireless
 bwi0: interrupting at irq 52
 bwi0: BBP id 0x4306, BBP rev 0x2, BBP pkg 0
 bwi0: MAC: rev 4
 bwi0: PHY type 2, rev 1, ver 1
 bwi0: RF manu 0x17f, type 0x2050, rev 2
 bwi0: invalid antenna gain in sprom
 bwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 bwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
 24Mbps 36Mbps 48Mbps 54Mbps
 cbb0 at pci1 dev 19 function 0: Texas Instruments PCI1510 PCI-CardBus
 Bridge (rev. 0x00)
 obio0 at pci1 dev 23 function 0: addr 0x80000000
 zsc0 at obio0 irq 22,23
 zstty0 at zsc0 channel 0
 zstty1 at zsc0 channel 1
 snapper0 at obio0 offset 0x10000: irq 30,1,2
 pmu0 at obio0 offset 0x16000 irq 47:  rev. 12
 pmu0: initializing IIC bus
 iic1 at pmu0: I2C bus
 pmu0: initializing RTC
 pmu0: initializing ADB
 nadb0 at pmu0: Apple Desktop Bus
 pmu0: power-mgt not configured
 smartbat0 at pmu0 addr 0: smart battery
  flags: 1 AC
 ki2c1 at obio0
 iic2 at ki2c1: I2C bus
 cereal at iic2 addr 0x60 not configured
 deq0 at iic2 addr 0x35 Audio Codec (tas3004)
 i2c-modem at iic2 addr 0x1a not configured
 wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer
 atabus0 at wdc0 channel 0
 snapper0: codec: TAS3004
 audio0 at snapper0: full duplex, playback, capture, mmap
 snapper0: Virtual format configured - Format SLINEAR, precision 16,
 channels 2, frequency 48000
 snapper0: Latency: 128 milliseconds
 spkr0 at audio0: PC Speaker (synthesized)
 wsbell at spkr0 not configured
 ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller
 (rev. 0x00)
 ohci0: memory access is disabled
 ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller
 (rev. 0x00)
 ohci1: memory access is disabled
 ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller
 (rev. 0x00)
 ohci2: interrupting at irq 29
 ohci2: OHCI version 1.0, legacy support
 usb0 at ohci2: USB revision 1.0
 ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
 ohci3: interrupting at irq 63
 ohci3: OHCI version 1.0
 usb1 at ohci3: USB revision 1.0
 ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
 ohci4: interrupting at irq 63
 ohci4: OHCI version 1.0
 usb2 at ohci4: USB revision 1.0
 ehci0 at pci1 dev 27 function 2: NEC USB2 Host Controller (rev. 0x04)
 ehci0: interrupting at irq 63
 ehci0: EHCI version 1.0
 ehci0: 2 companion controllers, 3 ports each: ohci3 ohci4
 usb3 at ehci0: USB revision 2.0
 cbb0: cacheline 0x8 lattimer 0x10
 cbb0: bhlc 0x21008
 cbb0: interrupting at irq 53
 cardslot0 at cbb0
 cardbus0 at cardslot0: bus 1
 pcmcia0 at cardslot0
 uninorth2 at mainbus0
 pci2 at uninorth2 bus 0
 pci2: i/o space, memory space enabled
 pchb2 at pci2 dev 11 function 0
 pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
 wdc1 at pci2 dev 13 function 0: interrupting at irq 39
 atabus1 at wdc1 channel 0
 fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire
 (rev. 0x81)
 fwohci0: interrupting at irq 40
 fwohci0: OHCI version 1.10 (ROM=0)
 fwohci0: No. of Isochronous channels is 8.
 fwohci0: EUI64 00:0a:95:ff:fe:
 fwohci0: invalid speed 7 (fixed to 3).
 fwohci0: Phy 1394a available S800, 3 ports.
 fwohci0: Link S800, max_rec 4096 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
 gem0: interrupting at irq 41
 makphy0 at gem0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 1
 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
 1000baseT-FDX, auto
 gem0: Ethernet address 00:0a:95:, 10KB RX fifo, 4KB TX fifo
 vmmask 737e0000 schedmask 7ffe0000 highmask 7ffe0000
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "mftb" frequency 18432000 Hz quality 100
 fwohci0: BUS reset
 fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
 ieee1394if0: bus manager 0
 uhub0 at usb0: Apple Computer (0x106b) OHCI root hub (0000), class 9/0,
 rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: NEC (0x1033) OHCI root hub (0000), class 9/0, rev
 1.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 uhub2 at usb2: NEC (0x1033) OHCI root hub (0000), class 9/0, rev
 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: NEC (0x1033) EHCI root hub (0000), class 9/0, rev
 2.00/1.00, addr 1
 uhub3: 5 ports with 5 removable, self powered
 atapibus0 at atabus0: 2 targets
 cd0 at atapibus0 drive 0: <MATSHITADVD-R   UJ-816, , DXJ3> cdrom removable
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
 cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
 adbkbd0 at nadb0 addr 2: iBook keyboard
 wskbd0 at adbkbd0 mux 1
 wskbd0: connecting to wsdisplay0
 wsmouse0 at adbkbd0 mux 0
 adbms0 at nadb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
 wsmouse1 at adbms0 mux 0
 adbbt0 at nadb0 addr 7: button device
 AC Power: AC adapter online.
 umass0 at uhub3 port 2 configuration 1 interface 0
 umass0: SanDisk (0x781) Ultra Fit (0x5583), rev 2.10/1.00, addr 2
 umass0: using SCSI over Bulk-Only
 scsibus0 at umass0: 2 targets, 1 lun per target
 sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra Fit, 1.00> disk removable
 sd0: 29327 MB, 59585 cyl, 16 head, 63 sec, 512 bytes/sect x 60062500 sectors
 ugen0 at uhub0 port 1
 ugen0: Apple Computer (0x5ac) product 8203 (0x8203), rev 1.10/5.26, addr 2
 swwdog0: software watchdog initialized
 WARNING: 4 errors while detecting hardware; check system log.
 boot device: <unknown>
 root device: sd0
 dump device (default sd0b):
 file system (default generic):
 root on sd0a dumps on sd0b
 root file system type: ffs
 kern.module.path=/stand/macppc/8.99.6/modules
 init path (default /sbin/init):
 init: trying /sbin/init
Prev by Date: PR/52715 CVS commit: src/bin/sh
Next by Date: Re: PR/52715 CVS commit: src/bin/sh
Previous by Thread: Re: port-macppc/52712: Graphics corruption with Radeon 9600 card with or without radeonfb
Next by Thread: Re: port-macppc/52712: Graphics corruption with Radeon 9600 card with or without radeonfb
Indexes:
Home | Main Index | Thread Index | Old Index