kern/51945: crash after resume

[martin%NetBSD.org@localhost]

>Number:         51945
>Category:       kern
>Synopsis:       crash after resume
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Feb 04 17:30:00 +0000 2017
>Originator:     Martin Husemann
>Release:        NetBSD 7.99.59
>Organization:
The NetBSD Foundation, Inc.
>Environment:
System: NetBSD night-owl.duskware.de 7.99.59 NetBSD 7.99.59 (NIGHT-OWL) #479: Thu Feb 2 21:44:14 CET 2017 martin%night-owl.duskware.de@localhost:/usr/src/sys/arch/amd64/compile/NIGHT-OWL amd64
Architecture: x86_64
Machine: amd64
>Description:
After previous bad experiences with totaly non working suspend/resume,
I tried again.

To my suprise it mostly worked, screen came up (on text console ttyE0) and
the keyboard worked - yay!
Unfortunately it crashes imediately and I couldn't get a crash dump
(due to port-amd64/51944).

dmesg of the machine:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.59 (NIGHT-OWL) #479: Thu Feb  2 21:44:14 CET 2017
	martin%night-owl.duskware.de@localhost:/usr/src/sys/arch/amd64/compile/NIGHT-OWL
total memory = 3956 MB
avail memory = 3819 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Acer            Aspire 7740                     (Rev            )
mainbus0 (root)
ACPI: RSDP 0x00000000000F6A10 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000BF7F2B2F 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
ACPI: FACP 0x00000000BF7E2000 0000F4 (v03 INTEL  CALPELLA 06040000 PTEC 00000001)
ACPI: DSDT 0x00000000BF7E3000 00C03F (v02 Intel  CALPELLA 06040000 INTL 20060912)
ACPI: FACS 0x00000000BF79AFC0 000040
ACPI: FACS 0x00000000BF79AFC0 000040
ACPI: HPET 0x00000000BF7FED6A 000038 (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
ACPI: MCFG 0x00000000BF7FEDA2 00003C (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
ACPI: SLIC 0x00000000BF7FEDDE 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
ACPI: APIC 0x00000000BF7FEF54 000084 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: BOOT 0x00000000BF7FEFD8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SSDT 0x00000000BF7E1000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20060912)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz, id 0x20652
cpu1 at mainbus0 apid 4
cpu1: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz, id 0x20652
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz, id 0x20652
cpu3 at mainbus0 apid 5
cpu3: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz, id 0x20652
acpi0 at mainbus0: Intel ACPICA 20170119
acpi0: X/RSDT: OemId <ACRSYS,ACRPRDCT,06040000>, AslId <INNA,00000000>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8107081C10 0003AE (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810715B010 000842 (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8107081410 000303 (v01 PmRef  ApIst    00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81070541D0 000119 (v01 PmRef  ApCst    00003000 INTL 20060912)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpivga0 at acpi0 (PEGP): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout1: brightness levels: [10,20,30,40,50,60,70,80,90,100]
acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0200 (acpiout2): TV, head 0, bios detect
acpivga0:   0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0, bios detect
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: SONY LION rechargeable battery
acpibat0: granularity: low->warn 0.065 Ah, warn->full 4.027 Ah
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
pckbc1 at acpi0 (KBD0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0302) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (TZS0): cpu0 cpu1 cpu2 cpu3
acpitz0: levels: critical 92.0 C, passive 88.0 C, passive cooling
acpitz1 at acpi0 (TZS1)
acpitz1: levels: critical 92.0 C, passive cooling
ACPI: Enabled 7 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Extended W mode, Up/down buttons, Palm detect, Multi-finger Report
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0044 (rev. 0x12)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 0045 (rev. 0x12)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 68e0 (rev. 0x00)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
vendor 8086 product 3b64 (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi1 vec 0
hdafg1 at hdaudio1: vendor 10ec product 0670
hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg1: DIG01 2ch: SPDIF Out [Jack]
hdafg1: ADC02 2ch: Line In [Jack], Mic In [Built-In]
hdafg1: ADC03 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdvsmfg at hdaudio1 not configured
ppb1 at pci0 dev 28 function 0: vendor 8086 product 3b42 (rev. 0x05)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM57780 Fast Ethernet
bge0: interrupting at msi2 vec 0
bge0: HW config 000a0554, 00004004, 00000008, 00000000 00000000
bge0: ASIC BCM57780 A1 (0x57780001), Ethernet address 00:26:2d:90:46:d1
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM57780 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 1: vendor 8086 product 3b44 (rev. 0x05)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
athn0 at pci3 dev 0 function 0: Atheros AR9280
athn0: rev 2 (2T2R), ROM rev 22, address c4:17:fe:ce:37:34
athn0: interrupting at ioapic0 pin 17
athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ehci1 at pci0 dev 29 function 0: vendor 8086 product 3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xa5)
pci4 at ppb3 bus 15
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3b09 (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3b29 (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xff20ff63<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 3b30 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pci5 at mainbus0 bus 255
pci5: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb1 at pci5 dev 0 function 0: vendor 8086 product 2c62 (rev. 0x02)
pchb2 at pci5 dev 0 function 1: vendor 8086 product 2d01 (rev. 0x02)
pchb3 at pci5 dev 2 function 0: vendor 8086 product 2d10 (rev. 0x02)
pchb4 at pci5 dev 2 function 1: vendor 8086 product 2d11 (rev. 0x02)
pchb5 at pci5 dev 2 function 2: vendor 8086 product 2d12 (rev. 0x02)
pchb6 at pci5 dev 2 function 3: vendor 8086 product 2d13 (rev. 0x02)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C3: FFH, lat 245 us, pow   350 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 25000 mW, 2133 MHz
acpicpu0: P1: FFH, lat  10 us, pow 23440 mW, 1999 MHz
acpicpu0: P2: FFH, lat  10 us, pow 21952 mW, 1866 MHz
acpicpu0: P3: FFH, lat  10 us, pow 20472 mW, 1733 MHz
acpicpu0: P4: FFH, lat  10 us, pow 19025 mW, 1599 MHz
acpicpu0: P5: FFH, lat  10 us, pow 17604 mW, 1466 MHz
acpicpu0: P6: FFH, lat  10 us, pow 16232 mW, 1333 MHz
acpicpu0: P7: FFH, lat  10 us, pow 14869 mW, 1199 MHz
acpicpu0: P8: FFH, lat  10 us, pow 13565 mW, 1066 MHz
acpicpu0: P9: FFH, lat  10 us, pow 12259 mW,  933 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=90
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2128032680 Hz quality 3000
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 4: device present, speed: 1.5Gb/s
acpiacad0: AC adapter online.
wd0 at atabus0 drive 0
wd0: <Hitachi HTS545050B9A300>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus2: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVDRAM GT30N, KZJ9CM31623, 1.01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 8087 product 0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 8087 product 0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uvideo0 at uhub3 port 5 configuration 1 interface 0: SuYin Video WebCam, rev 2.00/5.00, addr 3
video0 at uvideo0: SuYin Video WebCam, rev 2.00/5.00, addr 3
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.59/modules
drm: initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1025:0x0347).
drm: register mmio base: 0xcfee0000
drm: register mmio size: 131072
drm kern info: ATOM BIOS: Acer
radeon0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon0: info: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
drm: Detected VRAM RAM=200M, BAR=256M
drm: RAM width 64bits DDR
Zone  kernel: Available graphics memory: 1378272 kiB
drm: radeon: 512M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading CEDAR Microcode
drm: Internal thermal controller without fan control
drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffff800046a16c00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffff800046a16c0c
radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffff800046a4c418
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 16 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ring test on 3 succeeded in 1 usecs
drm: ring test on 5 succeeded in 1 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm:   LVDS-1
drm:   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
drm:   Encoders:
drm:     LCD1: INTERNAL_UNIPHY
drm: Connector 1:
drm:   HDMI-A-1
drm:   HPD1
drm:   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
drm:   Encoders:
drm:     DFP1: INTERNAL_UNIPHY1
drm: Connector 2:
drm:   VGA-1
drm:   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
drm:   Encoders:
drm:     CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff80004706d000, size 1600x900, depth 32, stride 6400
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)


>How-To-Repeat:
Close lid on this notebook, open it again and press power button,

>Fix:
n/a