NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kern/50453
The following reply was made to PR kern/50453; it has been noted by GNATS.
From: Jose Luis Rodriguez Garcia <joseyluis%gmail.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc:
Subject: Re: kern/50453
Date: Fri, 15 Jan 2016 22:18:37 +0100
--001a1135335c5616a9052965f2e3
Content-Type: text/plain; charset=UTF-8
I have also the same error with pineview.
I obtain this ACPI Error at the the begining.
This is from the output of boot -v of current of January 15 of 2016. (I
have copied the message from dmesg of next boot, not from serial console.
The boot output
was stored in /var/log/messages, although it couldn't boot).
acpi0 at mainbus0: Intel ACPICA 20160108
acpi0: X/RSDT: OemId <Shuttl,Shuttle ,20110321>, AslId <MSFT,00000097>
ACPI Error: No handler for Region [ECRM] (0xfffffe813eee9e00)
[EmbeddedControl] (20160108/evregion-184)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20160108/exfldio-323)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SBRG.EC0._REG] (Node
0xfffffe813eed8c10), AE_NOT_EXIST (20160108/psparse-559)
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
I copy the full output of the boot (all but crypto messages). There is
other messages about ACPI, but I don't know if they are important.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.25 (GENERIC.201601140500Z) #0: Thu Jan 14 05:53:23 UTC 2016
builds%b45.netbsd.org@localhost:
/home/builds/ab/HEAD/amd64/201601140500Z-obj/home/source/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 4086 MB
avail memory = 3948 MB
timecounter: Timecounters tick every 10.000 msec
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
............
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Standard XS35 (To Be Filled By O.E.M.)
mainbus0 (root)
ACPI: RSDP 0x00000000000F9ED0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000BF6B0100 00005C (v01 Shuttl Shuttle 20110321 MSFT
00000097)
ACPI: FACP 0x00000000BF6B0290 0000F4 (v04 032111 FACP1608 20110321 MSFT
00000097)
ACPI: DSDT 0x00000000BF6B05C0 006645 (v02 XS35V XS35V10 00000200 INTL
20051117)
ACPI: FACS 0x00000000BF6BE000 000040
ACPI: FACS 0x00000000BF6BE000 000040
ACPI: APIC 0x00000000BF6B0390 00006C (v02 032111 APIC1608 20110321 MSFT
00000097)
ACPI: MCFG 0x00000000BF6B0400 00003C (v01 032111 OEMMCFG 20110321 MSFT
0000 097)
ACPI: SLIC 0x00000000BF6B0440 000176 (v01 Shuttl Shuttle 20110321 MSFT
00000097)
ACPI: OEMB 0x00000000BF6BE040 000072 (v01 032111 OEMB1608 20110321 MSFT
00000097)
ACPI: HPET 0x00000000BF6BA5C0 000038 (v01 032111 OEMHPET 20110321 MSFT
00000097)
ACPI: GSCI 0x00000000BF6BE0C0 002024 (v01 032111 GMCHSCI 20110321 MSFT
00000097)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
timecounter: Timecounter "lapic" frequency 199592089 Hz quality -100
cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, id 0x106ca
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, id 0x106ca
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, id 0x106ca
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, id 0x106ca
acpi0 at mainbus0: Intel ACPICA 20160108
acpi0: X/RSDT: OemId <Shuttl,Shuttle ,20110321>, AslId <MSFT,00000097>
ACPI Error: No handler for Region [ECRM] (0xfffffe813eee9e00)
[EmbeddedControl] (20160108/evregion-184)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20160108/exfldio-323)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SBRG.EC0._REG] (Node
0xfffffe813eed8c10), AE_NOT_EXIST (20160108/psparse-559)
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0410): ACPI Display Output Device
acpiout1: brightness levels: [0-7]
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0,
bios detect
acpivga0: 0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1,
head 0, bios detect
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
RMEM (PNP0C01) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AMW0, PNP0C14-1): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 104.0 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 1F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product a000 (rev. 0x02)
agp0 at pchb0: i915-family chipset
agp0: can't set up chipset flush page: 35
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product a001 (rev. 0x02)
DRM error in i915_gmch_probe: failed to set up gmch
i915drmkms0: unable to attach drm: 5
vendor 8086 product a002 (miscellaneous display, revision 0x02) at pci0 dev
2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: vendor 111d product 7605
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24
AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1
@ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1
@ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 197b product 2382 (miscellaneous system, revision 0x80) at pci2 dev
0 function 0 not configured
sdhc0 at pci2 dev 0 function 2: vendor 197b product 2381 (rev. 0x80)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SDHC 2.0, rev 176, SDMA, 50000 kHz, 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
vendor 197b product 2383 (miscellaneous system, revision 0x80) at pci2 dev
0 function 3 not configured
jme0 at pci2 dev 0 function 5
jme0: JMicron JMC250 Gigabit Ethernet Controller
jme0: PCI device revision : 0x3, Chip revision: 0x23
jme0: Ethernet address 80:ee:73:13:66:4f
jme0: interrupting at ioapic0 pin 17
ukphy0 at jme0 phy 1: OUI 0x00d831, model 0x0021, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 3: vendor 8086 product 27d6 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1
@ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
rtwn0 at pci3 dev 0 function 0: vendor 10ec product 8176 (rev. 0x01)
rtwn0: interrupting at msi0 vec 0
rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address e0:91:53:45:06:1a
rtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xe2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27bc (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 27c1 (rev. 0x02)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP
0xc720ff03<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1795578930 Hz quality -100
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb3: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb4: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
uhub4 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ehci0: handing over low speed device on port 8 to uhci3
wd0 at atabus0 drive 0
wd0: <TOSHIBA MQ01ABD100>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVDRAM GT32N, KZ7B2I13217, 1.00> cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
crypto: assign driver 1, flags 2
crypto: driver 1 registers alg 1 flags 0 maxoplen 0
........
crypto: driver 1 registers alg 22 flags 0 maxoplen 0
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, plface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20131218/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
ules
panic: cnopen: no console device
fatal breakpoint trap in supervisor mode
trap type 1 code 0 rip ffffffff80114a75 cs 8 rflags 246 cr2 7f7ff6c0cc00
ilevel 0 rsp fffffe8040e83ac8
curlwp 0xfffffe8107cc2280 pid 2.1 lowest kstack 0xfffffe8040e802c0
--001a1135335c5616a9052965f2e3
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr"><div><div><div>I have also the same error with pineview.<b=
r><br></div>I obtain this ACPI Error at the the begining.<br></div>This is =
from the output of boot -v of current of January 15 of 2016. (I have copied=
the message from dmesg of next boot, not from serial console. The boot out=
put<br></div><div>was stored in /var/log/messages, although it couldn't=
boot).<br></div><div><br>acpi0 at mainbus0: Intel ACPICA 20160108<br>acpi0=
: X/RSDT: OemId <Shuttl,Shuttle ,20110321>, AslId <MSFT,00000097&g=
t;<br>ACPI Error: No handler for Region [ECRM] (0xfffffe813eee9e00) [Embedd=
edControl] (20160108/evregion-184)<br>ACPI Error: Region EmbeddedControl (I=
D=3D3) has no handler (20160108/exfldio-323)<br>ACPI Error: Method parse/ex=
ecution failed [\_SB.PCI0.SBRG.EC0._REG] (Node 0xfffffe813eed8c10), AE_NOT_=
EXIST (20160108/psparse-559)<br>acpi0: MCFG: segment 0, bus 0-255, address =
0x00000000e0000000<br><br><br><br></div>I copy the full output of the boot =
(all but crypto messages). There is other messages about ACPI, but I don=
9;t know if they are important.<br><br>Copyright (c) 1996, 1997, 1998, 1999=
, 2000, 2001, 2002, 2003, 2004, 2005,<br>=C2=A0=C2=A0=C2=A0 2006, 2007, 200=
8, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016<br>=C2=A0=C2=A0=C2=A0 The=
NetBSD Foundation, Inc.=C2=A0 All rights reserved.<br>Copyright (c) 1982, =
1986, 1989, 1991, 1993<br>=C2=A0=C2=A0=C2=A0 The Regents of the University =
of California.=C2=A0 All rights reserved.<br><br>NetBSD 7.99.25 (GENERIC.20=
1601140500Z) #0: Thu Jan 14 05:53:23 UTC 2016<br>=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0 builds%b45.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/2016011=
40500Z-obj/home/source/ab/HEAD/src/sys/arch/amd64/compile/GENERIC<br>total =
memory =3D 4086 MB<br>avail memory =3D 3948 MB<br>timecounter: Timecounters=
tick every 10.000 msec<br>crypto: assign driver 0, flags 2<br>crypto: driv=
er 0 registers alg 1 flags 0 maxoplen 0<br>............<br>crypto: driver 0=
registers alg 22 flags 0 maxoplen 0<br>Kernelized RAIDframe activated<br>t=
imecounter: Timecounter "i8254" frequency 1193182 Hz quality 100<=
br>Standard XS35 (To Be Filled By O.E.M.)<br>mainbus0 (root)<br>ACPI: RSDP =
0x00000000000F9ED0 000024 (v02 ACPIAM)<br>ACPI: XSDT 0x00000000BF6B0100 000=
05C (v01 Shuttl Shuttle=C2=A0 20110321 MSFT 00000097)<br>ACPI: FACP 0x00000=
000BF6B0290 0000F4 (v04 032111 FACP1608 20110321 MSFT 00000097)<br>ACPI: DS=
DT 0x00000000BF6B05C0 006645 (v02 XS35V=C2=A0 XS35V10=C2=A0 00000200 INTL 2=
0051117)<br>ACPI: FACS 0x00000000BF6BE000 000040<br>ACPI: FACS 0x00000000BF=
6BE000 000040<br>ACPI: APIC 0x00000000BF6B0390 00006C (v02 032111 APIC1608 =
20110321 MSFT 00000097)<br>ACPI: MCFG 0x00000000BF6B0400 00003C (v01 032111=
OEMMCFG=C2=A0 20110321 MSFT 0000 097)<br>ACPI: SLIC 0x00000000BF6B0440 000=
176 (v01 Shuttl Shuttle=C2=A0 20110321 MSFT 00000097)<br>ACPI: OEMB 0x00000=
000BF6BE040 000072 (v01 032111 OEMB1608 20110321 MSFT 00000097)<br>ACPI: HP=
ET 0x00000000BF6BA5C0 000038 (v01 032111 OEMHPET=C2=A0 20110321 MSFT 000000=
97)<br>ACPI: GSCI 0x00000000BF6BE0C0 002024 (v01 032111 GMCHSCI=C2=A0 20110=
321 MSFT 00000097)<br>ACPI: 1 ACPI AML tables successfully acquired and loa=
ded<br><br>ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20, 24 pins=
<br>cpu0 at mainbus0 apid 0<br>timecounter: Timecounter "lapic" f=
requency 199592089 Hz quality -100<br>cpu0: Intel(R) Atom(TM) CPU D525=C2=
=A0=C2=A0 @ 1.80GHz, id 0x106ca<br>cpu1 at mainbus0 apid 2<br>cpu1: Intel(R=
) Atom(TM) CPU D525=C2=A0=C2=A0 @ 1.80GHz, id 0x106ca<br>cpu2 at mainbus0 a=
pid 1<br>cpu2: Intel(R) Atom(TM) CPU D525=C2=A0=C2=A0 @ 1.80GHz, id 0x106ca=
<br>cpu3 at mainbus0 apid 3<br>cpu3: Intel(R) Atom(TM) CPU D525=C2=A0=C2=A0=
@ 1.80GHz, id 0x106ca<br>acpi0 at mainbus0: Intel ACPICA 20160108<br>acpi0=
: X/RSDT: OemId <Shuttl,Shuttle ,20110321>, AslId <MSFT,00000097&g=
t;<br>ACPI Error: No handler for Region [ECRM] (0xfffffe813eee9e00) [Embedd=
edControl] (20160108/evregion-184)<br>ACPI Error: Region EmbeddedControl (I=
D=3D3) has no handler (20160108/exfldio-323)<br>ACPI Error: Method parse/ex=
ecution failed [\_SB.PCI0.SBRG.EC0._REG] (Node 0xfffffe813eed8c10), AE_NOT_=
EXIST (20160108/psparse-559)<br>acpi0: MCFG: segment 0, bus 0-255, address =
0x00000000e0000000<br>acpi0: SCI interrupting at int 9<br>timecounter: Time=
counter "ACPI-Safe" frequency 3579545 Hz quality 900<br>hpet0 at =
acpi0: high precision event timer (mem 0xfed00000-0xfed00400)<br>timecounte=
r: Timecounter "hpet0" frequency 14318180 Hz quality 2000<br>acpi=
ec0 at acpi0 (EC0, PNP0C09)<br>: io 0x62,0x66<br>MCH (PNP0C01) at acpi0 not=
configured<br>attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0<br>pckb=
c1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1<br>pckbc2 at acp=
i0 (PS2M, PNP0F03) (aux port): irq 12<br>pcppi1 at acpi0 (SPKR, PNP0800): i=
o 0x61<br>midi0 at pcppi1: PC speaker<br>sysbeep0 at pcppi1<br>RMSC (PNP0C0=
2) at acpi0 not configured<br>FWH (INT0800) at acpi0 not configured<br>FWHE=
(PNP0C02) at acpi0 not configured<br>OMSC (PNP0C02) at acpi0 not configure=
d<br>PCIE (PNP0C02) at acpi0 not configured<br>acpivga0 at acpi0 (GFX0): AC=
PI Display Adapter<br>acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Outp=
ut Device<br>acpiout1 at acpivga0 (LCD, 0x0410): ACPI Display Output Device=
<br>acpiout1: brightness levels: [0-7]<br>acpivga0: connected output device=
s:<br>acpivga0:=C2=A0=C2=A0 0x0100 (acpiout0): VGA Analog Monitor, index 0,=
port 0, head 0, bios detect<br>acpivga0:=C2=A0=C2=A0 0x0410 (acpiout1): In=
t. Digital Flat Panel, index 0, port 1, head 0, bios detect<br>acpibut0 at =
acpi0 (SLPB, PNP0C0E): ACPI Sleep Button<br>RMEM (PNP0C01) at acpi0 not con=
figured<br>acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button<br>acpi=
wmi0 at acpi0 (AMW0, PNP0C14-1): ACPI WMI Interface<br>wmieeepc0 at acpiwmi=
0: Asus Eee PC WMI mappings<br>acpitz0 at acpi0 (TZ00)<br>acpitz0: levels: =
critical 104.0 C, passive cooling<br>ACPI: Enabled 3 GPEs in block 00 to 1F=
<br>pckbd0 at pckbc1 (kbd slot)<br>pckbc1: using irq 1 for kbd slot<br>wskb=
d0 at pckbd0: console keyboard<br>attimer1: attached to pcppi1<br>pci0 at m=
ainbus0 bus 0: configuration mode 1<br>pci0: i/o space, memory space enable=
d, rd/line, rd/mult, wr/inv ok<br>pchb0 at pci0 dev 0 function 0: vendor 80=
86 product a000 (rev. 0x02)<br>agp0 at pchb0: i915-family chipset<br>agp0: =
can't set up chipset flush page: 35<br>i915drmkms0 at pci0 dev 2 functi=
on 0: vendor 8086 product a001 (rev. 0x02)<br>DRM error in i915_gmch_probe:=
failed to set up gmch<br>i915drmkms0: unable to attach drm: 5<br>vendor 80=
86 product a002 (miscellaneous display, revision 0x02) at pci0 dev 2 functi=
on 1 not configured<br>hdaudio0 at pci0 dev 27 function 0: HD Audio Control=
ler<br>hdaudio0: interrupting at ioapic0 pin 16<br>hdafg0 at hdaudio0: vend=
or 111d product 7605<br>hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack=
]<br>hdafg0: ADC01 2ch: Mic In [Jack]<br>hdafg0: ADC02 2ch: Mic In [Built-I=
n]<br>hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 =
PCM24 AC3<br>audio0 at hdafg0: full duplex, playback, capture, mmap, indepe=
ndent<br>ppb0 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x0=
2)<br>ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Co=
mplex> x1 @ 2.5GT/s<br>pci1 at ppb0 bus 1<br>pci1: i/o space, memory spa=
ce enabled, rd/line, wr/inv ok<br>ppb1 at pci0 dev 28 function 1: vendor 80=
86 product 27d2 (rev. 0x02)<br>ppb1: PCI Express capability version 1 <R=
oot Port of PCI-E Root Complex> x1 @ 2.5GT/s<br>pci2 at ppb1 bus 2<br>pc=
i2: i/o space, memory space enabled, rd/line, wr/inv ok<br>vendor 197b prod=
uct 2382 (miscellaneous system, revision 0x80) at pci2 dev 0 function 0 not=
configured<br>sdhc0 at pci2 dev 0 function 2: vendor 197b product 2381 (re=
v. 0x80)<br>sdhc0: interrupting at ioapic0 pin 18<br>sdhc0: SDHC 2.0, rev 1=
76, SDMA, 50000 kHz, 3.3V, 512 byte blocks<br>sdmmc0 at sdhc0 slot 0<br>ven=
dor 197b product 2383 (miscellaneous system, revision 0x80) at pci2 dev 0 f=
unction 3 not configured<br>jme0 at pci2 dev 0 function 5<br>jme0: JMicron =
JMC250 Gigabit Ethernet Controller<br>jme0: PCI device revision : 0x3, Chip=
revision: 0x23<br>jme0: Ethernet address 80:ee:73:13:66:4f<br>jme0: interr=
upting at ioapic0 pin 17<br>ukphy0 at jme0 phy 1: OUI 0x00d831, model 0x002=
1, rev. 1<br>ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000ba=
seT, 1000baseT-FDX, auto<br>ppb2 at pci0 dev 28 function 3: vendor 8086 pro=
duct 27d6 (rev. 0x02)<br>ppb2: PCI Express capability version 1 <Root Po=
rt of PCI-E Root Complex> x1 @ 2.5GT/s<br>pci3 at ppb2 bus 3<br>pci3: i/=
o space, memory space enabled, rd/line, wr/inv ok<br>rtwn0 at pci3 dev 0 fu=
nction 0: vendor 10ec product 8176 (rev. 0x01)<br>rtwn0: interrupting at ms=
i0 vec 0<br>rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address e0:91:53:45:06:1=
a<br>rtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps<br>rtwn0: 11g rates: 1Mbp=
s 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbp=
s<br>uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)<=
br>uhci0: interrupting at ioapic0 pin 23<br>usb0 at uhci0: USB revision 1.0=
<br>uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)<b=
r>uhci1: interrupting at ioapic0 pin 19<br>usb1 at uhci1: USB revision 1.0<=
br>uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)<br=
>uhci2: interrupting at ioapic0 pin 18<br>usb2 at uhci2: USB revision 1.0<b=
r>uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)<br>=
uhci3: interrupting at ioapic0 pin 16<br>usb3 at uhci3: USB revision 1.0<br=
>ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)<br>e=
hci0: interrupting at ioapic0 pin 23<br>ehci0: EHCI version 1.0<br>ehci0: c=
ompanion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3<br>usb4 at ehci=
0: USB revision 2.0<br>ppb3 at pci0 dev 30 function 0: vendor 8086 product =
2448 (rev. 0xe2)<br>pci4 at ppb3 bus 4<br>pci4: i/o space, memory space ena=
bled<br>ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27bc (rev.=
0x02)<br>timecounter: Timecounter "ichlpcib0" frequency 3579545 =
Hz quality 1000<br>ichlpcib0: 24-bit timer<br>tco0 at ichlpcib0: TCO (watch=
dog) timer configured.<br>tco0: Min/Max interval 1/367 seconds<br>gpio0 at =
ichlpcib0: 64 pins<br>ahcisata0 at pci0 dev 31 function 2: vendor 8086 prod=
uct 27c1 (rev. 0x02)<br>ahcisata0: interrupting at ioapic0 pin 19<br>ahcisa=
ta0: 64-bit DMA<br>ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0x=
c720ff03<PSC,SSC,PMD,ISS=3D0x2=3DGen2,SCLO,SAL,SALP,SNCQ,S64A><br>ata=
bus0 at ahcisata0 channel 0<br>atabus1 at ahcisata0 channel 1<br>atabus2 at=
ahcisata0 channel 2<br>atabus3 at ahcisata0 channel 3<br>ichsmb0 at pci0 d=
ev 31 function 3: vendor 8086 product 27da (rev. 0x02)<br>ichsmb0: interrup=
ting at ioapic0 pin 19<br>iic0 at ichsmb0: I2C bus<br>isa0 at ichlpcib0<br>=
acpicpu0 at cpu0: ACPI CPU<br>acpicpu0: C1: HLT, lat=C2=A0=C2=A0 0 us, pow=
=C2=A0=C2=A0=C2=A0=C2=A0 0 mW<br>coretemp0 at cpu0: thermal sensor, 1 C res=
olution, Tjmax=3D100<br>acpicpu1 at cpu1: ACPI CPU<br>coretemp1 at cpu1: th=
ermal sensor, 1 C resolution, Tjmax=3D100<br>acpicpu2 at cpu2: ACPI CPU<br>=
acpicpu3 at cpu3: ACPI CPU<br>timecounter: Timecounter "clockinterrupt=
" frequency 100 Hz quality 0<br>timecounter: Timecounter "TSC&quo=
t; frequency 1795578930 Hz quality -100<br>IPsec: Initialized Security Asso=
ciation Processing.<br>uhub0 at usb0: vendor 8086 UHCI root hub, class 9/0,=
rev 1.00/1.00, addr 1<br>uhub0: 2 ports with 2 removable, self powered<br>=
uhub1 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1<=
br>uhub1: 2 ports with 2 removable, self powered<br>uhub2 at usb3: vendor 8=
086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1<br>uhub2: 2 ports with =
2 removable, self powered<br>uhub3 at usb4: vendor 8086 EHCI root hub, clas=
s 9/0, rev 2.00/1.00, addr 1<br>uhub3: 8 ports with 8 removable, self power=
ed<br>uhub4 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, a=
ddr 1<br>uhub4: 2 ports with 2 removable, self powered<br>ahcisata0 port 0:=
device present, speed: 3.0Gb/s<br>ahcisata0 port 1: device present, speed:=
1.5Gb/s<br>ehci0: handing over low speed device on port 8 to uhci3<br>wd0 =
at atabus0 drive 0<br>wd0: <TOSHIBA MQ01ABD100><br>wd0: drive support=
s 16-sector PIO transfers, LBA48 addressing<br>wd0: 931 GB, 1938021 cyl, 16=
head, 63 sec, 512 bytes/sect x 1953525168 sectors<br>wd0: drive supports P=
IO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)<br>wd0(ahcisata0:0:0): =
using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)<br>a=
tapibus0 at atabus1: 1 targets<br>cd0 at atapibus0 drive 0: <HL-DT-STDVD=
RAM GT32N, KZ7B2I13217, 1.00> cdrom removable<br>cd0: drive supports PIO=
mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)<br>cd0(ahcisata0:1:0): us=
ing PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)<br>cry=
pto: assign driver 1, flags 2<br>crypto: driver 1 registers alg 1 flags 0 m=
axoplen 0<br>........<br>crypto: driver 1 registers alg 22 flags 0 maxoplen=
0<br>pad0: outputs: 44100Hz, 16-bit, stereo<br>audio1 at pad0: half duplex=
, plface-646)<br>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State=
[\_S2_] (20131218/hwxface-646)<br>pckbd0 at pckbc1 (kbd slot)<br>ules<br>p=
anic: cnopen: no console device<br>fatal breakpoint trap in supervisor mode=
<br>trap type 1 code 0 rip ffffffff80114a75 cs 8 rflags 246 cr2 7f7ff6c0cc0=
0 ilevel 0 rsp fffffe8040e83ac8<br>curlwp 0xfffffe8107cc2280 pid 2.1 lowest=
kstack 0xfffffe8040e802c0<br><br></div>
--001a1135335c5616a9052965f2e3--
Home |
Main Index |
Thread Index |
Old Index