The PS2 keyboard worked, and took a screen shot of the bt, attached.
> -----Original Message-----
> From: John Refling [mailto:netbsdrat%gmail.com@localhost]
> Sent: Friday, August 14, 2015 3:12 AM
> To: 'netbsd-bugs%netbsd.org@localhost'
> Subject: netbsd 7.0 rc3 amd64 fails on HP dc5700
>
> Tried the rc3 and it crashes very early in the attempted boot. see screen
> shot attached.
>
> Tried option #3, no ACPI or SMP, same thing.
>
> USB keybd is unresponsive after the crash.
>
> Machine booted the following OK:
>
> Pentoo64, Ubuntu Amd 64, XP 64, FreeBSD 10.0 Amd 64, Jibbed (NetBSD 6.0
> live Amd64).
>
> Dmesg from Jibbed 6.0 below:
>
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
> 2006, 2007, 2008, 2009, 2010, 2011, 2012
> The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 6.0 (JIBBED6) #0: Fri Nov 2 02:51:50 CET 2012
> root%amd64.aydogan.net@localhost:/root/livecd/work/JIBBED6
> total memory = 1015 MB
> avail memory = 970 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> Hewlett-Packard HP Compaq dc5700 Microtower ( )
> mainbus0 (root)
> cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf65
> cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf65
> ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20110623
> acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,20060831>, AslId < ,00000000>
> acpi0: SCI interrupting at int 9
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
> pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
> ECP0 (PNP0401) at acpi0 not configured
> COM1 (PNP0501) at acpi0 not configured
> FDC0 (PNP0700) at acpi0 not configured
> APIC (PNP0003) at acpi0 not configured
> SBD1 (PNP0C02) at acpi0 not configured
> SBD2 (PNP0C02) at acpi0 not configured
> acpivga0 at acpi0 (GFX0): ACPI Display Adapter
> MBRD (PNP0C01) at acpi0 not configured
> acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
> acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
> wmihp0 at acpiwmi0: HP WMI mappings
> attimer1: attached to pcppi1
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2990 (rev. 0x02)
> agp0 at pchb0: detected 7676k stolen memory
> agp0: aperture at 0xe0000000, size 0x20000000
> vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2992 (rev. 0x02)
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> i915drm0 at vga0: Intel i965Q
> i915drm0: AGP at 0xe0000000 256MB
> i915drm0: Initialized i915 1.6.0 20080730
> uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x02)
> uhci0: interrupting at ioapic0 pin 20
> usb0 at uhci0: USB revision 1.0
> uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x02)
> uhci1: interrupting at ioapic0 pin 21
> usb1 at uhci1: USB revision 1.0
> ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x02)
> ehci0: interrupting at ioapic0 pin 22
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1
> usb2 at ehci0: USB revision 2.0
> hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
> hdaudio0: interrupting at ioapic0 pin 21
> hdafg0 at hdaudio0: Realtek ALC260
> hdafg0: DAC00 2ch: Speaker [Jack], HP Out [Jack]
> hdafg0: ADC02 2ch: Line In [Jack], AUX [Built-In], Mic In [Jack]
> hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
> audio0 at hdafg0: full duplex, playback, capture, independent
> ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x02)
> ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
> pci1 at ppb0 bus 32
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x02)
> ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
> pci2 at ppb1 bus 63
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> bge0 at pci2 dev 0 function 0: Broadcom BCM5755 Gigabit Ethernet
> bge0: interrupting at ioapic0 pin 17
> bge0: adjust device control 0x102004 -> 0x105004
> bge0: ASIC BCM5755 A2 (0xa002), Ethernet address 00:1a:4b:45:7d:dc
> bge0: setting short Tx thresholds
> brgphy0 at bge0 phy 1: BCM5755 1000BASE-T media interface, rev. 0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x02)
> uhci2: interrupting at ioapic0 pin 20
> usb3 at uhci2: USB revision 1.0
> uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x02)
> uhci3: interrupting at ioapic0 pin 21
> usb4 at uhci3: USB revision 1.0
> ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x02)
> ehci1: interrupting at ioapic0 pin 20
> ehci1: EHCI version 1.0
> ehci1: companion controllers, 2 ports each: uhci2 uhci3
> usb5 at ehci1: USB revision 2.0
> ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xf2)
> pci3 at ppb2 bus 7
> pci3: i/o space, memory space enabled
> ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2810 (rev.
> 0x02)
> timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
> ichlpcib0: 24-bit timer
> ichlpcib0: TCO (watchdog) timer configured.
> piixide0 at pci0 dev 31 function 2: Intel 82801H Serial ATA Controller
> (ICH8) (rev. 0x02)
> piixide0: bus-master DMA support present
> piixide0: primary channel configured to compatibility mode
> piixide0: primary channel interrupting at ioapic0 pin 14
> atabus0 at piixide0 channel 0
> piixide0: secondary channel configured to compatibility mode
> piixide0: secondary channel interrupting at ioapic0 pin 15
> atabus1 at piixide0 channel 1
> piixide1 at pci0 dev 31 function 5: Intel 82801H Serial ATA Controller
> (ICH8) (rev. 0x02)
> piixide1: bus-master DMA support present
> piixide1: primary channel wired to native-PCI mode
> piixide1: using ioapic0 pin 18 for native-PCI interrupt
> atabus2 at piixide1 channel 0
> piixide1: secondary channel wired to native-PCI mode
> atabus3 at piixide1 channel 1
> isa0 at ichlpcib0
> lpt0 at isa0 port 0x378-0x37b irq 7
> tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: Broadcom BCM0102 rev 0x2
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> acpicpu0 at cpu0: ACPI CPU
> acpicpu0: C1: HLT, lat 0 us, pow 0 mW
> acpicpu0: P0: I/O, lat 160 us, pow 135000 mW, 3200 MHz
> acpicpu0: P1: I/O, lat 160 us, pow 109784 mW, 2800 MHz
> acpicpu0: P2: I/O, lat 160 us, pow 86400 mW, 2400 MHz
> acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
> acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
> acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
> acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
> acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
> acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
> acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
> acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
> acpicpu1 at cpu1: ACPI CPU
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> timecounter: Timecounter "TSC" frequency 3192143360 Hz quality 3000
> uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
> 1
> uhub2: 4 ports with 4 removable, self powered
> uhub3 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
> 1
> uhub3: 4 ports with 4 removable, self powered
> uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub4: 2 ports with 2 removable, self powered
> acpicpu1: failed to set frequency to 2400 (err 35)
> uhub5 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub5: 2 ports with 2 removable, self powered
> acpicpu0: failed to set frequency to 2400 (err 35)
> acpicpu0: failed to set frequency to 2400 (err 35)
> uhidev0 at uhub1 port 2 configuration 1 interface 0
> uhidev0: Microsoft Wired Keyboard 600, rev 1.10/1.10, addr 2, iclass 3/1
> ukbd0 at uhidev0
> uhidev1 at uhub4 port 1 configuration 1 interface 0
> uhidev1: vendor 0x15d9 USB Mouse, rev 1.10/1.00, addr 2, iclass 3/1
> ums0 at uhidev1: 3 buttons and Z dir
> wsmouse0 at ums0 mux 0
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev2 at uhub1 port 2 configuration 1 interface 1
> uhidev2: Microsoft Wired Keyboard 600, rev 1.10/1.10, addr 2, iclass 3/0
> uhidev2: 3 report ids
> uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
> uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0
> atapibus0 at atabus1: 2 targets
> cd0 at atapibus0 drive 0: <TSSTcorp CD-RW/DVD-ROM TS-H493B, , D300> cdrom
> removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
> DMA)
> Kernelized RAIDframe activated
> pad0: outputs: 44100Hz, 16-bit, stereo
> audio1 at pad0: half duplex, playback, capture
> boot device: cd0
> root on cd0a
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> wsdisplay0: screen 5 added (80x25, vt100 emulation)
> wsdisplay0: screen 6 added (80x25, vt100 emulation)
> wsdisplay0: screen 7 added (80x25, vt100 emulation)
> i915drm0: interrupting at ioapic0 pin 16
> set{u,g}id pid 265 (gnome-pty-helper) was invoked by uid 1000 ppid 998
> (Terminal) with fd 2 closed
>
>
Attachment:
z522701.jpg
Description: JPEG image
