NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
kern/49363: drm2 GENERIC blank screen after startx Intel G45 graphics X11_TYPE=native
>Number: 49363
>Category: kern
>Synopsis: drm2 GENERIC blank screen after startx Intel G45 graphics X11_TYPE=native
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Wed Nov 05 07:05:00 +0000 2014
>Originator: David Shao
>Release: NetBSD 7.99.1 GENERIC amd64
>Organization:
>Environment:
NetBSD 7.99.1 NetBSD 7.99.1 (GENERIC) #9: Tue Nov 4 21:16:35 PST 2014 xxxxxx@:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
>Description:
For a Shuttle SG45H7 small form factor system with Intel G45 (Eaglelake) graphics, X11_TYPE=native, trying to start xfce4 with startx merely results in a blank screen. The tail end of /var/log/messages reads:
Nov 4 22:34:27 /netbsd: drm: GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
Nov 4 22:34:27 /netbsd: drm: GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
The machine is connected using a HDMI to DVI connector to a Samsung Syncmaster P2370HD monitor. X.org in other BSDs such as FreeBSD 10.x and DragonFly have not had a problem with this setup, also, this setup worked fine with NetBSD current prior to the implementation of drm2.
No /etc/X11/xorg.conf is being used.
For NetBSD 7.99.1 GENERIC amd64 through
Module Name: src
Date: Wed Nov 5 01:40:30 UTC 2014
Modified Files:
src/lib/librumpuser: configure configure.ac rumpuser_config.h.in
Log Message:
check for clock_gettime from librt too
and pkgsrc through
Module Name: pkgsrc
Date: Tue Nov 4 22:39:20 UTC 2014
Modified Files:
pkgsrc/doc: CHANGES-2014
Log Message:
Note update of tnftp to 20141104
dmesg:
i915drm0 at vga0: Intel G45/G43
i915drm0: AGP at 0xd0000000 256MB
i915drm0:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.1 (GENERIC) #9: Tue Nov 4 21:16:35 PST 2014
xxxxxx@:/usr/obj/sys/arch/amd64/compile/GENERIC
total memory = 8124 MB
avail memory = 7869 MB
kern.module.path=/stand/amd64/7.99.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Shuttle Inc SG45 (V10)
mainbus0 (root)
ACPI: RSDP 0x00000000000F7EE0 000014 (v00 Shuttl)
ACPI: RSDT 0x00000000BBCE3000 00003C (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: FACP 0x00000000BBCE3080 000084 (v02 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20140926/tbfadt-678)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20140926/tbfadt-730)
ACPI: DSDT 0x00000000BBCE3140 004E30 (v01 SHUTTL SG45V10 00001000 MSFT 03000000)
ACPI: FACS 0x00000000BBC90000 000040
ACPI: HPET 0x00000000BBCE8040 000038 (v01 Shuttl Shuttle 42302E31 AWRD 00000098)
ACPI: MCFG 0x00000000BBCE8080 00003C (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: SLIC 0x00000000BBCE80C0 000176 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: APIC 0x00000000BBCE7F80 000084 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: SSDT 0x00000000BBCE8B60 000590 (v01 PmRef CpuPm 00003000 INTL 20041203)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz, id 0x1067a
cpu1 at mainbus0 apid 3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz, id 0x1067a
cpu2 at mainbus0 apid 1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz, id 0x1067a
cpu3 at mainbus0 apid 2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz, id 0x1067a
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20140926
acpi0: X/RSDT: OemId <Shuttl,Shuttle ,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
SYSR (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
ECP1 (PNP0401) at acpi0 not configured
PMIO (PNP0C02) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
EXPL (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
acpitz0 at acpi0 (THRM): cpu0
acpitz0: active cooling level 0: 50.0C
acpitz0: levels: critical 60.0 C, passive 50.0 C
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-646)
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2e20 (rev. 0x03)
agp0 at pchb0: G4X-family chipset
agp0: detected 65020k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2e22 (rev. 0x03)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff80008ed3d000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
vendor 8086 product 2e23 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 8086 product 3a37 (rev. 0x00)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 3a38 (rev. 0x00)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 3a39 (rev. 0x00)
uhci2: interrupting at ioapic0 pin 19
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 3a3c (rev. 0x00)
ehci0: interrupting at ioapic0 pin 18
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: vendor 10ec product 0888
hdafg0: DAC00 8ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: ADC03 2ch: Line In [Jack], AUX [Built-In], Mic In [Jack]
hdafg0: DIG-In04 2ch: SPDIF In [Jack]
hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg1 at hdaudio0: vendor 8086 product 2803
hdafg1: HDMI00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 3a40 (rev. 0x00)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci1 dev 0 function 0: vendor 197b product 2368 (rev. 0x00)
jmide0: 1 PATA port
jmide0: interrupting at ioapic0 pin 16
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is PATA
atabus0 at jmide0 channel 0
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is unused
ppb1 at pci0 dev 28 function 2: vendor 8086 product 3a44 (rev. 0x00)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci2 dev 0 function 0, Yukon-2 EC Ultra (0x5): ioapic0 pin 18
msk0 at mskc0 port A: Ethernet address 00:30:1b:bd:74:7c
makphy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci3 at pci0 dev 29 function 0: vendor 8086 product 3a34 (rev. 0x00)
uhci3: interrupting at ioapic0 pin 23
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 3a35 (rev. 0x00)
uhci4: interrupting at ioapic0 pin 19
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 3a36 (rev. 0x00)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 3a3a (rev. 0x00)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0x90)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3a18 (rev. 0x00)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3a22 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xef22ffc5<EMS,CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 1
atabus3 at ahcisata0 channel 2
atabus4 at ahcisata0 channel 3
atabus5 at ahcisata0 channel 4
atabus6 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 3a30 (rev. 0x00)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt1 at isa0 port 0x278-0x27b irq : polled
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
wd0 at atabus2 drive 0
wd0: <WDC WD1002FBYS-02A6B0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus3 drive 0
wd1: <WDC WD1002FBYS-02A6B0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub8 at uhub7 port 4: vendor 1a40 USB 2.0 Hub [MTT], class 9/0, rev 2.00/1.00, addr 2
uhub8: multiple transaction translators
uhub8: 7 ports with 7 removable, self powered
uhub9 at uhub8 port 3: Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 3
uhub9: single transaction translator
uhub9: 3 ports with 2 removable, bus powered
uhidev0 at uhub9 port 2 configuration 1 interface 0
uhidev0: Apple, Inc Apple Keyboard, rev 2.00/0.71, addr 4, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 5 key codes, apple fn key
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub9 port 2 configuration 1 interface 1
uhidev1: Apple, Inc Apple Keyboard, rev 2.00/0.71, addr 4, iclass 3/0
uhid0 at uhidev1: input=1, output=0, feature=0
uhidev2 at uhub8 port 4 configuration 1 interface 0
uhidev2: Logitech USB Optical Mouse, rev 2.00/34.01, addr 5, iclass 3/1
ums0 at uhidev2: 8 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
drm: GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
drm: GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
Xorg.0.log:
[ 205.799]
X.Org X Server 1.10.6
Release Date: 2011-07-08
[ 205.799] X Protocol Version 11, Revision 0
[ 205.799] Build Operating System: NetBSD/amd64 -
[ 205.799] Current Operating System: NetBSD 7.99.1 NetBSD 7.99.1 (GENERIC) #9: Tue Nov 4 21:16:35 PST 2014 xxxxxx@:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
[ 205.800] Build Date: 01 August 2011 01:01:00AM
[ 205.800]
[ 205.800] Current version of pixman: 0.32.6
[ 205.800] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 205.800] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 205.800] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 4 22:34:27 2014
[ 205.811] (II) Loader magic: 0x828c80
[ 205.811] (II) Module ABI versions:
[ 205.811] X.Org ANSI C Emulation: 0.4
[ 205.811] X.Org Video Driver: 10.0
[ 205.811] X.Org XInput driver : 12.2
[ 205.811] X.Org Server Extension : 5.0
[ 205.828] (--) PCI:*(0:0:2:0) 8086:2e22:1297:3141 rev 3, Mem @ 0xfd400000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/8
[ 205.828] (--) PCI: (0:0:2:1) 8086:2e23:1297:3141 rev 3, Mem @ 0xfdd00000/1048576
[ 205.828] (==) Using default built-in configuration (21 lines)
[ 205.828] (==) --- Start of built-in configuration ---
[ 205.828] Section "Device"
[ 205.828] Identifier "Builtin Default intel Device 0"
[ 205.828] Driver "intel"
[ 205.828] EndSection
[ 205.828] Section "Screen"
[ 205.828] Identifier "Builtin Default intel Screen 0"
[ 205.828] Device "Builtin Default intel Device 0"
[ 205.828] EndSection
[ 205.828] Section "Device"
[ 205.828] Identifier "Builtin Default vesa Device 0"
[ 205.828] Driver "vesa"
[ 205.828] EndSection
[ 205.828] Section "Screen"
[ 205.828] Identifier "Builtin Default vesa Screen 0"
[ 205.828] Device "Builtin Default vesa Device 0"
[ 205.828] EndSection
[ 205.828] Section "ServerLayout"
[ 205.828] Identifier "Builtin Default Layout"
[ 205.828] Screen "Builtin Default intel Screen 0"
[ 205.828] Screen "Builtin Default vesa Screen 0"
[ 205.828] EndSection
[ 205.828] (==) --- End of built-in configuration ---
[ 205.829] (==) ServerLayout "Builtin Default Layout"
[ 205.829] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 205.829] (**) | |-->Monitor "<default monitor>"
[ 205.829] (**) | |-->Device "Builtin Default intel Device 0"
[ 205.829] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 205.829] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
[ 205.829] (**) | |-->Monitor "<default monitor>"
[ 205.829] (**) | |-->Device "Builtin Default vesa Device 0"
[ 205.829] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 205.829] (==) Not automatically adding devices
[ 205.829] (==) Not automatically enabling devices
[ 205.830] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 205.830] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 205.830] (==) |-->Input Device "<default pointer>"
[ 205.830] (==) |-->Input Device "<default keyboard>"
[ 205.830] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 205.830] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 205.830] (II) LoadModule: "extmod"
[ 205.842] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 205.863] (II) Module extmod: vendor="X.Org Foundation"
[ 205.869] compiled for 1.10.6, module version = 1.0.0
[ 205.869] Module class: X.Org Server Extension
[ 205.869] ABI class: X.Org Server Extension, version 5.0
[ 205.870] (II) Loading extension MIT-SCREEN-SAVER
[ 205.870] (II) Loading extension XFree86-VidModeExtension
[ 205.870] (II) Loading extension XFree86-DGA
[ 205.870] (II) Loading extension DPMS
[ 205.870] (II) Loading extension XVideo
[ 205.870] (II) Loading extension XVideo-MotionCompensation
[ 205.870] (II) Loading extension X-Resource
[ 205.870] (II) LoadModule: "dbe"
[ 205.871] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 205.882] (II) Module dbe: vendor="X.Org Foundation"
[ 205.882] compiled for 1.10.6, module version = 1.0.0
[ 205.882] Module class: X.Org Server Extension
[ 205.882] ABI class: X.Org Server Extension, version 5.0
[ 205.882] (II) Loading extension DOUBLE-BUFFER
[ 205.882] (II) LoadModule: "glx"
[ 205.883] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 205.912] (II) Module glx: vendor="X.Org Foundation"
[ 205.919] compiled for 1.10.6, module version = 1.0.0
[ 205.919] ABI class: X.Org Server Extension, version 5.0
[ 205.919] (==) AIGLX enabled
[ 205.919] (II) Loading extension GLX
[ 205.919] (II) LoadModule: "record"
[ 205.920] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 205.927] (II) Module record: vendor="X.Org Foundation"
[ 205.927] compiled for 1.10.6, module version = 1.13.0
[ 205.927] Module class: X.Org Server Extension
[ 205.927] ABI class: X.Org Server Extension, version 5.0
[ 205.927] (II) Loading extension RECORD
[ 205.927] (II) LoadModule: "dri"
[ 205.928] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 205.931] (II) Module dri: vendor="X.Org Foundation"
[ 205.932] compiled for 1.10.6, module version = 1.0.0
[ 205.932] ABI class: X.Org Server Extension, version 5.0
[ 205.932] (II) Loading extension XFree86-DRI
[ 205.932] (II) LoadModule: "dri2"
[ 205.933] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 205.940] (II) Module dri2: vendor="X.Org Foundation"
[ 205.940] compiled for 1.10.6, module version = 1.2.0
[ 205.940] ABI class: X.Org Server Extension, version 5.0
[ 205.940] (II) Loading extension DRI2
[ 205.940] (II) LoadModule: "intel"
[ 205.940] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 205.981] (II) Module intel: vendor="X.Org Foundation"
[ 205.990] compiled for 1.10.6, module version = 2.21.15
[ 205.990] Module class: X.Org Video Driver
[ 205.990] ABI class: X.Org Video Driver, version 10.0
[ 205.990] (II) LoadModule: "vesa"
[ 205.991] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 205.993] (II) Module vesa: vendor="X.Org Foundation"
[ 205.993] compiled for 1.10.6, module version = 2.3.3
[ 205.993] Module class: X.Org Video Driver
[ 205.993] ABI class: X.Org Video Driver, version 10.0
[ 205.993] (II) LoadModule: "mouse"
[ 205.994] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 205.999] (II) Module mouse: vendor="X.Org Foundation"
[ 205.999] compiled for 1.10.6, module version = 1.9.0
[ 205.999] Module class: X.Org XInput Driver
[ 205.999] ABI class: X.Org XInput driver, version 12.2
[ 205.999] (II) LoadModule: "kbd"
[ 205.999] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 206.008] (II) Module kbd: vendor="X.Org Foundation"
[ 206.008] compiled for 1.10.6, module version = 1.8.0
[ 206.008] Module class: X.Org XInput Driver
[ 206.008] ABI class: X.Org XInput driver, version 12.2
[ 206.008] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 206.009] (II) VESA: driver for VESA chipsets: vesa
[ 206.009] (--) Using wscons driver on /dev/ttyE0 in pcvt compatibility mode (version 3.32)
[ 206.009] (--) using VT number 1
[ 206.009] drmOpenDevice: node name is /dev/dri/card0
[ 206.010] drmOpenDevice: open result is 12, (OK)
[ 206.010] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 206.010] drmOpenDevice: node name is /dev/dri/card0
[ 206.010] drmOpenDevice: open result is 12, (OK)
[ 206.010] drmOpenByBusid: drmOpenMinor returns 12
[ 206.010] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 206.010] drmOpenDevice: node name is /dev/dri/card0
[ 206.010] drmOpenDevice: open result is 12, (OK)
[ 206.010] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 206.010] drmOpenDevice: node name is /dev/dri/card0
[ 206.010] drmOpenDevice: open result is 12, (OK)
[ 206.010] drmOpenByBusid: drmOpenMinor returns 12
[ 206.010] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 206.010] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 206.010] (WW) Falling back to old probe method for vesa
[ 206.010] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 206.010] drmOpenDevice: node name is /dev/dri/card0
[ 206.010] drmOpenDevice: open result is 12, (OK)
[ 206.011] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 206.011] drmOpenDevice: node name is /dev/dri/card0
[ 206.011] drmOpenDevice: open result is 12, (OK)
[ 206.011] drmOpenByBusid: drmOpenMinor returns 12
[ 206.011] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 206.011] (II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 206.011] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 206.011] (==) intel(0): RGB weight 888
[ 206.011] (==) intel(0): Default visual is TrueColor
[ 206.011] (--) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
[ 206.011] (**) intel(0): Relaxed fencing enabled
[ 206.011] (**) intel(0): Wait on SwapBuffers? enabled
[ 206.011] (**) intel(0): Triple buffering? enabled
[ 206.011] (**) intel(0): Framebuffer tiled
[ 206.011] (**) intel(0): Pixmaps tiled
[ 206.011] (**) intel(0): 3D buffers tiled
[ 206.011] (**) intel(0): SwapBuffers wait enabled
[ 206.011] (==) intel(0): video overlay key set to 0x101fe
[ 206.038] (II) intel(0): Output VGA1 has no monitor section
[ 206.040] (II) intel(0): Output HDMI1 has no monitor section
[ 206.040] (II) intel(0): Output DP1 has no monitor section
[ 206.065] (II) intel(0): EDID for output VGA1
[ 206.067] (II) intel(0): EDID for output HDMI1
[ 206.067] (II) intel(0): EDID for output DP1
[ 206.067] (II) intel(0): Output VGA1 disconnected
[ 206.067] (II) intel(0): Output HDMI1 disconnected
[ 206.067] (II) intel(0): Output DP1 disconnected
[ 206.067] (WW) intel(0): No outputs definitely connected, trying again...
[ 206.067] (II) intel(0): Output VGA1 disconnected
[ 206.067] (II) intel(0): Output HDMI1 disconnected
[ 206.067] (II) intel(0): Output DP1 disconnected
[ 206.067] (WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 206.067] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 206.067] (II) intel(0): Kernel page flipping support detected, enabling
[ 206.067] (==) intel(0): DPI set to (96, 96)
[ 206.067] (II) Loading sub module "fb"
[ 206.067] (II) LoadModule: "fb"
[ 206.072] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 206.077] (II) Module fb: vendor="X.Org Foundation"
[ 206.077] compiled for 1.10.6, module version = 1.0.0
[ 206.077] ABI class: X.Org ANSI C Emulation, version 0.4
[ 206.077] (II) Loading sub module "dri2"
[ 206.077] (II) LoadModule: "dri2"
[ 206.078] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 206.078] (II) Module dri2: vendor="X.Org Foundation"
[ 206.078] compiled for 1.10.6, module version = 1.2.0
[ 206.078] ABI class: X.Org Server Extension, version 5.0
[ 206.078] (II) UnloadModule: "vesa"
[ 206.078] (II) Unloading vesa
[ 206.078] (==) Depth 24 pixmap format is 32 bpp
[ 206.088] (II) intel(0): [DRI2] Setup complete
[ 206.088] (II) intel(0): [DRI2] DRI driver: i965
[ 206.089] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 206.102] (II) UXA(0): Driver registered support for the following operations:
[ 206.102] (II) solid
[ 206.102] (II) copy
[ 206.102] (II) composite (RENDER acceleration)
[ 206.102] (II) put_image
[ 206.102] (II) get_image
[ 206.102] (==) intel(0): Backing store disabled
[ 206.102] (==) intel(0): Silken mouse enabled
[ 206.103] (II) intel(0): Initializing HW Cursor
[ 206.103] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 206.104] (==) intel(0): DPMS enabled
[ 206.104] (==) intel(0): Intel XvMC decoder enabled
[ 206.104] (II) intel(0): Set up textured video
[ 206.105] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 206.105] (II) intel(0): direct rendering: DRI2 Enabled
[ 206.126] (--) RandR disabled
[ 206.126] (II) Initializing built-in extension Generic Event Extension
[ 206.126] (II) Initializing built-in extension SHAPE
[ 206.126] (II) Initializing built-in extension MIT-SHM
[ 206.126] (II) Initializing built-in extension XInputExtension
[ 206.126] (II) Initializing built-in extension XTEST
[ 206.126] (II) Initializing built-in extension BIG-REQUESTS
[ 206.126] (II) Initializing built-in extension SYNC
[ 206.126] (II) Initializing built-in extension XKEYBOARD
[ 206.126] (II) Initializing built-in extension XC-MISC
[ 206.126] (II) Initializing built-in extension SECURITY
[ 206.126] (II) Initializing built-in extension XINERAMA
[ 206.126] (II) Initializing built-in extension XFIXES
[ 206.126] (II) Initializing built-in extension XFree86-Bigfont
[ 206.126] (II) Initializing built-in extension RENDER
[ 206.126] (II) Initializing built-in extension RANDR
[ 206.126] (II) Initializing built-in extension COMPOSITE
[ 206.126] (II) Initializing built-in extension DAMAGE
[ 206.430] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 206.430] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 206.430] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 206.430] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 206.430] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 206.430] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/i965_dri.so
[ 206.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 206.924] (II) Using input driver 'mouse' for '<default pointer>'
[ 206.924] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 206.924] (**) Option "CorePointer"
[ 206.924] (**) <default pointer>: always reports core events
[ 206.931] (WW) <default pointer>: No Device specified, looking for one...
[ 206.931] (II) <default pointer>: found Device "/dev/wsmouse"
[ 206.932] (--) <default pointer>: Device: "/dev/wsmouse"
[ 206.932] (==) <default pointer>: Protocol: "WSMouse"
[ 206.932] (**) <default pointer>: always reports core events
[ 206.932] (**) Option "Device" "/dev/wsmouse"
[ 206.932] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 206.932] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 206.932] (**) <default pointer>: Buttons: 9
[ 206.933] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
[ 206.933] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 206.933] (**) <default pointer>: (accel) acceleration profile 0
[ 206.933] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 206.933] (**) <default pointer>: (accel) acceleration threshold: 4
[ 206.933] (II) Using input driver 'kbd' for '<default keyboard>'
[ 206.933] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 206.933] (**) Option "CoreKeyboard"
[ 206.933] (**) <default keyboard>: always reports core events
[ 206.933] (**) <default keyboard>: always reports core events
[ 206.933] (**) Option "Protocol" "standard"
[ 206.933] (**) Option "XkbRules" "base"
[ 206.933] (**) Option "XkbModel" "pc105"
[ 206.933] (**) Option "XkbLayout" "us"
[ 206.933] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
>How-To-Repeat:
>Fix:
Home |
Main Index |
Thread Index |
Old Index