Re: kern/45477 cannot change audion volume on 5.99.55 (GENERIC)

[Aleksey Cheusov <cheusov%tut.by@localhost>]

The following reply was made to PR kern/45477; it has been noted by GNATS.

From: Aleksey Cheusov <cheusov%tut.by@localhost>
To: gnats-bugs%gnats.NetBSD.org@localhost
Cc: 
Subject: Re: kern/45477 cannot change audion volume on 5.99.55 (GENERIC)
Date: Mon, 10 Dec 2012 19:31:22 +0300

 Similar issue happens on different machine running 6.0/i386 and
 different driver (azalia(4)).  I'm able to change volume using
 mixerctl(1) but cannot do so using aumix, xmms and others.  Using
 aumix (PCM), I successfully decreased volume but could not increase
 it.  Only mixerctl (outputs.line) helped.
 
 "mixerctl -a" and dmesg output is below
 
 
 outputs.spdif.source=hdaudio
 outputs.headphones.mute=off
 outputs.headphones.boost=on
 outputs.headphones=200,200
 outputs.line.mute=off
 outputs.line.boost=off
 outputs.line.eapd=on
 outputs.line=248,248
 outputs.surround.mute=off
 outputs.surround=200,200
 outputs.clfe.mute=off
 outputs.clfe=120,120
 outputs.clfe.lrswap=off
 outputs.mono.source=mixerout
 outputs.mono.mute=off
 outputs.mono=120
 inputs.dac.mute=off
 inputs.dac=8,8
 record.mic.gain=85,85
 record.mic.mute=off
 record.mic=8,8
 inputs.line.mute=off
 inputs.line=8,8
 inputs.phone.mute=off
 inputs.phone=120
 inputs.cd.mute=off
 inputs.cd=8,8
 inputs.aux.mute=off
 inputs.aux=8,8
 inputs.speaker.mute=on
 inputs.speaker=119
 record.source=mic
 record.volume.mute=off
 record.volume=187,187
 playback.mode=analog
 
 
 NetBSD 6.0.0_PATCH (GENERIC) #3: Fri Dec  7 11:55:38 FET 2012
         
cheusov%cheusov.imb.invention.com@localhost:/srv/obj/sys/arch/i386/compile/GENERIC
 total memory = 3294 MB
 avail memory = 3225 MB
 timecounter: Timecounters tick every 10.000 msec
 cprng kernel: WARNING insufficient entropy at creation.
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 System manufacturer System Product Name (System Version)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, id 
0x40fb2
 cpu1 at mainbus0 apid 1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, id 
0x40fb2
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20110623
 acpi0: X/RSDT: OemId <Nvidia,ASUSACPI,42302e31>, AslId <AWRD,00000000>
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfefff000-0xfefff400)
 timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 MBIO (PNP0C02) at acpi0 not configured
 SYSR (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
 npx1: reported by CPUID; using exception 16
 pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
 aibs0: failed to evaluate FSIF: AE_BAD_VALUE
 EXPL (PNP0C02) at acpi0 not configured
 MEM (PNP0C01) at acpi0 not configured
 acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
 acpitz0 at acpi0 (THRM): cpu0
 acpitz0: active cooling level 0: 73.0C
 acpitz0: levels: critical 75.0 C, passive 73.0 C
 AWY (AWY0001) at acpi0 not configured
 apm0 at acpi0: Power Management spec V1.2
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 vendor 0x10de product 0x02f0 (RAM memory, revision 0xa2) at pci0 dev 0 
function 0 not configured
 vendor 0x10de product 0x02fa (RAM memory, revision 0xa2) at pci0 dev 0 
function 1 not configured
 vendor 0x10de product 0x02fe (RAM memory, revision 0xa2) at pci0 dev 0 
function 2 not configured
 vendor 0x10de product 0x02f8 (RAM memory, revision 0xa2) at pci0 dev 0 
function 3 not configured
 vendor 0x10de product 0x02f9 (RAM memory, revision 0xa2) at pci0 dev 0 
function 4 not configured
 Skipping broken PCI header on 0:0:5
 vendor 0x10de product 0x02ff (RAM memory, revision 0xa2) at pci0 dev 0 
function 5 not configured
 vendor 0x10de product 0x027f (RAM memory, revision 0xa2) at pci0 dev 0 
function 6 not configured
 vendor 0x10de product 0x027e (RAM memory, revision 0xa2) at pci0 dev 0 
function 7 not configured
 ppb0 at pci0 dev 2 function 0: vendor 0x10de product 0x02fc (rev. 0xa1)
 ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb1 at pci0 dev 3 function 0: vendor 0x10de product 0x02fd (rev. 0xa1)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb2 at pci0 dev 4 function 0: vendor 0x10de product 0x02fb (rev. 0xa1)
 ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 vga1 at pci0 dev 5 function 0: vendor 0x10de product 0x0240 (rev. 0xa2)
 vga1: WARNING: ignoring 64-bit BAR @ 0x14
 vga1: WARNING: ignoring 64-bit BAR @ 0x1c
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga1 not configured
 vendor 0x10de product 0x0270 (RAM memory, revision 0xa2) at pci0 dev 9 
function 0 not configured
 pcib0 at pci0 dev 10 function 0: vendor 0x10de product 0x0260 (rev. 0xa3)
 nfsmbc0 at pci0 dev 10 function 1: vendor 0x10de product 0x0264 (rev. 0xa3)
 nfsmb0 at nfsmbc0 SMBus 1
 iic0 at nfsmb0: I2C bus
 nfsmb1 at nfsmbc0 SMBus 2
 iic1 at nfsmb1: I2C bus
 vendor 0x10de product 0x0272 (RAM memory, revision 0xa3) at pci0 dev 10 
function 2 not configured
 ohci0 at pci0 dev 11 function 0: vendor 0x10de product 0x026d (rev. 0xa3)
 csr: 00b00007
 APCF: Picked IRQ 20 with weight 0
 ohci0: interrupting at ioapic0 pin 20
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 ehci0 at pci0 dev 11 function 1: vendor 0x10de product 0x026e (rev. 0xa3)
 APCL: Picked IRQ 21 with weight 0
 ehci0: interrupting at ioapic0 pin 21
 ehci0: EHCI version 1.0
 ehci0: companion controller, 8 ports each: ohci0
 usb1 at ehci0: USB revision 2.0
 viaide0 at pci0 dev 13 function 0: NVIDIA nForce430 IDE Controller (rev. 0xa1)
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to compatibility mode
 viaide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at viaide0 channel 0
 viaide0: secondary channel configured to compatibility mode
 viaide0: secondary channel interrupting at ioapic0 pin 15
 atabus1 at viaide0 channel 1
 viaide1 at pci0 dev 14 function 0: NVIDIA nForce430 Serial ATA Controller 
(rev. 0xa1)
 viaide1: bus-master DMA support present
 viaide1: primary channel wired to native-PCI mode
 APSI: Picked IRQ 22 with weight 0
 viaide1: using ioapic0 pin 22 for native-PCI interrupt
 atabus2 at viaide1 channel 0
 viaide1: secondary channel wired to native-PCI mode
 atabus3 at viaide1 channel 1
 viaide2 at pci0 dev 15 function 0: NVIDIA nForce430 Serial ATA Controller 
(rev. 0xa1)
 viaide2: bus-master DMA support present
 viaide2: primary channel wired to native-PCI mode
 APSJ: Picked IRQ 23 with weight 0
 viaide2: using ioapic0 pin 23 for native-PCI interrupt
 atabus4 at viaide2 channel 0
 viaide2: secondary channel wired to native-PCI mode
 atabus5 at viaide2 channel 1
 ppb3 at pci0 dev 16 function 0: vendor 0x10de product 0x026f (rev. 0xa2)
 pci4 at ppb3 bus 4
 pci4: i/o space, memory space enabled
 fwohci0 at pci4 dev 5 function 0: vendor 0x104c product 0x8023 (rev. 0x00)
 APC4: Picked IRQ 19 with weight 0
 fwohci0: interrupting at ioapic0 pin 19
 fwohci0: OHCI version 1.10 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:11:d8:00:00:e5:61:53
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 ex0 at pci4 dev 8 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
 APC1: Picked IRQ 16 with weight 0
 ex0: interrupting at ioapic0 pin 16
 ex0: MAC address 00:60:97:b8:b5:1b
 nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 azalia0 at pci0 dev 16 function 1: Generic High Definition Audio Controller
 AAZA: Picked IRQ 20 with weight 1
 azalia0: interrupting at ioapic0 pin 20
 azalia0: host: 0x10de/0x026c (rev. 162), HDA rev. 1.0
 nfe0 at pci0 dev 20 function 0: vendor 0x10de product 0x0269 (rev. 0xa3)
 APCH: Picked IRQ 21 with weight 1
 nfe0: interrupting at ioapic0 pin 21
 nfe0: Ethernet address 00:17:31:6f:ba:88
 makphy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
 pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
 pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
 pchb3 at pci0 dev 24 function 3: vendor 0x1022 product 0x1103 (rev. 0x00)
 amdtemp0 at pchb3: AMD CPU Temperature Sensors (K8: core rev BH-F2, socket AM2)
 isa0 at pcib0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 acpicpu0: P0: FFH, lat 100 us, pow 65000 mW, 2400 MHz
 acpicpu0: P1: FFH, lat 100 us, pow 54912 mW, 2200 MHz
 acpicpu0: P2: FFH, lat 100 us, pow 45846 mW, 2000 MHz
 acpicpu0: P3: FFH, lat 100 us, pow 41262 mW, 1800 MHz
 acpicpu0: P4: FFH, lat 100 us, pow 20973 mW, 1000 MHz
 acpicpu1 at cpu1: ACPI CPU
 fwohci0: BUS reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
 ieee1394if0: bus manager 0
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 azalia0: codec[0]: Analog Devices AD1986A (rev. 5.0), HDA rev. 1.0
 audio0 at azalia0: full duplex, playback, capture, independent
 uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 8 ports with 8 removable, self powered
 atapibus0 at atabus0: 2 targets
 uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 8 ports with 8 removable, self powered
 cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-M1912, , TM01> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 viaide1 port 1: device present, speed: 3.0Gb/s
 viaide2 port 0: device present, speed: 3.0Gb/s
 viaide1 port 0: device present, speed: 3.0Gb/s
 wd0 at atabus2 drive 0
 wd0: <SAMSUNG HD200HJ>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 186 GB, 387618 cyl, 16 head, 63 sec, 512 bytes/sect x 390719855 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
 wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd1 at atabus3 drive 0
 wd1: <ST3320620AS>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 298 GB, 620178 cyl, 16 head, 63 sec, 512 bytes/sect x 625140335 sectors
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd2 at atabus4 drive 0
 wd2: <SAMSUNG SP2504C>
 wd2: drive supports 16-sector PIO transfers, LBA48 addressing
 wd2: 232 GB, 484518 cyl, 16 head, 63 sec, 512 bytes/sect x 488395055 sectors
 wd2: 32-bit data port
 wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
 wd2(viaide2:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 Kernelized RAIDframe activated
 cprng sysctl: WARNING insufficient entropy at creation.
 boot device: wd0
 root on wd0a dumps on wd0b
 mountroot: trying smbfs...
 mountroot: trying ntfs...
 mountroot: trying nfs...
 mountroot: trying msdos...
 mountroot: trying lfs...
 mountroot: trying ext2fs...
 mountroot: trying ffs...
 root file system type: ffs
 init: copying out path `/sbin/init' 11
 uhidev0 at uhub0 port 3 configuration 1 interface 0
 uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
 ums0 at uhidev0: 3 buttons and Z dir
 wsmouse0 at ums0 mux 0