Re: port-sparc/46530 (Install failure of NetBSD/sparc 5.1.2 and6.0_BETA2 on qemu-1.0.1 and 1.1.0)

[Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>]

The following reply was made to PR port-sparc/46530; it has been noted by GNATS.

From: Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>
To: gnats-bugs%NetBSD.org@localhost, tsutsui%ceres.dti.ne.jp@localhost
Cc: martin%NetBSD.org@localhost, gnats-admin%NetBSD.org@localhost, 
netbsd-bugs%NetBSD.org@localhost
Subject: Re: port-sparc/46530 (Install failure of NetBSD/sparc 5.1.2
 and6.0_BETA2 on qemu-1.0.1 and 1.1.0)
Date: Sat, 29 Sep 2012 01:04:21 +0900 (JST)

 From: Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>, Date: Fri, 28 Sep 
2012 12:40:05 +0000 (UTC)
 
 > The following reply was made to PR port-sparc/46530; it has been noted by 
 > GNATS.
 > 
 > From: Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc: tsutsui%ceres.dti.ne.jp@localhost
 > Subject: Re: port-sparc/46530 (Install failure of NetBSD/sparc 5.1.2 
 > and6.0_BETA2
 >       on qemu-1.0.1 and 1.1.0)
 > Date: Fri, 28 Sep 2012 21:36:21 +0900
 > 
 >  >  esp0: !TC on DATA XFER [intr 10, stat 83, step 0] prevphase 2, resid 0
 >  >  
 >  >  Frequency is relatively low, but reproducable.
 >  
 >  Does it happen even on old (0.15.1 etc) qemu?
 
 It is too complicated. Many problems are mixed...
 
 It seems that !TC error is not happened on qemu-0.15.1 and -0.14
 in short time test run.
 But I have gotten the following errors.
 
 cd0(esp0:0:2:0): command aborted, retrying, cmd 0x35, info 0x0, data = 00 00 
00 00 00 06 00
 cd0(esp0:0:2:0): command aborted, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 
00
 
 
 On qemu-0.15.1 and -0.14, I have gotten timeout errors.
 I cannot understand why I had missed these errors...
 
 6.0_RC2 on qemu-1.2.0
 
 sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 1.2.> disk fixed
 sd0: 3072 MB, 6241 cyl, 16 head, 63 sec, 512 bytes/sect x 6291456 sectors
 
 
 5.1.2 on qemu-1.2.0
 
 sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 1.2.> disk fixed
 sd0: 3072 MB, 6241 cyl, 16 head, 63 sec, 512 bytes/sect x 6291456 sectors
 
 
 6.0_RC2 on qemu-0.15.1
 
 sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.15> disk fixed
 sd0: fabricating a geometry
 sd0: 3072 MB, 3072 cyl, 64 head, 32 sec, 512 bytes/sect x 6291456 sectors
 sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0ad3f88 (flags 0x1, dleft 0, stat 
0)], <state 2, nexus 0xf0ad3f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
 sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0ad3f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf0ad3f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
 sd0: async, 8-bit transfers
 
 
 5.1.2 on qemu-0.15.1
 
 sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.15> disk fixed
 sd0: fabricating a geometry
 sd0: 3072 MB, 3072 cyl, 64 head, 32 sec, 512 bytes/sect x 6291456 sectors
 sd0(esp0:0:0:0): esp0: timed out [ecb 0xf07e2f88 (flags 0x1, dleft 0, stat 
0)], <state 2, nexus 0xf07e2f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
 sd0(esp0:0:0:0): esp0: timed out [ecb 0xf07e2f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf07e2f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
 sd0: async, 8-bit transfers
 
 
 6.0_RC2 on qemu-0.14
 
 sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.14> disk fixed
 sd0: fabricating a geometry
 sd0: 3072 MB, 3072 cyl, 64 head, 32 sec, 512 bytes/sect x 6291456 sectors
 sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0ad3f88 (flags 0x1, dleft 0, stat 
0)], <state 2, nexus 0xf0ad3f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
 sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0ad3f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf0ad3f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
 sd0: async, 8-bit transfers
 
 
 5.1.2 on qemu-0.14
 
 sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.14> disk fixed
 sd0: fabricating a geometry
 sd0: 3072 MB, 3072 cyl, 64 head, 32 sec, 512 bytes/sect x 6291456 sectors
 sd0(esp0:0:0:0): esp0: timed out [ecb 0xf07e2f88 (flags 0x1, dleft 0, stat 
0)], <state 2, nexus 0xf07e2f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
 sd0(esp0:0:0:0): esp0: timed out [ecb 0xf07e2f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf07e2f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
 sd0: async, 8-bit transfers