Re: port-sparc/46530 (Install failure of NetBSD/sparc 5.1.2 and6.0_BETA2 on qemu-1.0.1 and 1.1.0)

[Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>]

From: Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>, Date: Fri, 28 Sep 2012 
12:40:05 +0000 (UTC)

> The following reply was made to PR port-sparc/46530; it has been noted by 
> GNATS.
> 
> From: Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>
> To: gnats-bugs%NetBSD.org@localhost
> Cc: tsutsui%ceres.dti.ne.jp@localhost
> Subject: Re: port-sparc/46530 (Install failure of NetBSD/sparc 5.1.2 
> and6.0_BETA2
>        on qemu-1.0.1 and 1.1.0)
> Date: Fri, 28 Sep 2012 21:36:21 +0900
> 
>  >  esp0: !TC on DATA XFER [intr 10, stat 83, step 0] prevphase 2, resid 0
>  >  
>  >  Frequency is relatively low, but reproducable.
>  
>  Does it happen even on old (0.15.1 etc) qemu?

It is too complicated. Many problems are mixed...

It seems that !TC error is not happened on qemu-0.15.1 and -0.14
in short time test run.
But I have gotten the following errors.

cd0(esp0:0:2:0): command aborted, retrying, cmd 0x35, info 0x0, data = 00 00 00 
00 00 06 00
cd0(esp0:0:2:0): command aborted, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 
00


On qemu-0.15.1 and -0.14, I have gotten timeout errors.
I cannot understand why I had missed these errors...

6.0_RC2 on qemu-1.2.0

sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 1.2.> disk fixed
sd0: 3072 MB, 6241 cyl, 16 head, 63 sec, 512 bytes/sect x 6291456 sectors


5.1.2 on qemu-1.2.0

sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 1.2.> disk fixed
sd0: 3072 MB, 6241 cyl, 16 head, 63 sec, 512 bytes/sect x 6291456 sectors


6.0_RC2 on qemu-0.15.1

sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.15> disk fixed
sd0: fabricating a geometry
sd0: 3072 MB, 3072 cyl, 64 head, 32 sec, 512 bytes/sect x 6291456 sectors
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0ad3f88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf0ad3f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0ad3f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf0ad3f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
sd0: async, 8-bit transfers


5.1.2 on qemu-0.15.1

sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.15> disk fixed
sd0: fabricating a geometry
sd0: 3072 MB, 3072 cyl, 64 head, 32 sec, 512 bytes/sect x 6291456 sectors
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf07e2f88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf07e2f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf07e2f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf07e2f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
sd0: async, 8-bit transfers


6.0_RC2 on qemu-0.14

sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.14> disk fixed
sd0: fabricating a geometry
sd0: 3072 MB, 3072 cyl, 64 head, 32 sec, 512 bytes/sect x 6291456 sectors
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0ad3f88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf0ad3f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0ad3f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf0ad3f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
sd0: async, 8-bit transfers


5.1.2 on qemu-0.14

sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.14> disk fixed
sd0: fabricating a geometry
sd0: 3072 MB, 3072 cyl, 64 head, 32 sec, 512 bytes/sect x 6291456 sectors
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf07e2f88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf07e2f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf07e2f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf07e2f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
sd0: async, 8-bit transfers