kern/43806: No sound on Thinkpad T510

[lechapelaing%yahoo.fr@localhost]

>Number:         43806
>Category:       kern
>Synopsis:       No sound on Thinkpad T510
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Fri Aug 27 13:30:00 +0000 2010
>Originator:     Germain Le Chapelain
>Release:        Current
>Organization:
BCG
>Environment:
NetBSD germ 5.99.39 NetBSD 5.99.39 (germ) #13: Fri Aug 27 06:11:58 UTC 2010  
root@:/usr/obj/sys/arch/amd64/compile/germ amd64

>Description:
I cannot ear any sound from MPlayer or xmms.  The volume bar does appear in 
mplayer when I tune the sound.

mixerctl -av returns a single line

bash-4.1$ mixerctl -av
outputs.dacsel=DAC00  { DAC00 }

I have added the azalia device and "options AZALIA_DEBUG" in my kernel 
configuration but nothing shows in dmesg 

===8<===8<===
opyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.39 (germ) #13: Fri Aug 27 06:11:58 UTC 2010
        root@:/usr/obj/sys/arch/amd64/compile/germ
total memory = 3955 MB
avail memory = 3818 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 4313CTO (ThinkPad T510)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2527MHz, id 0x20655
cpu1 at mainbus0 apid 1: Intel 686-class, 2527MHz, id 0x20655
cpu2 at mainbus0 apid 4: Intel 686-class, 2527MHz, id 0x20655
cpu3 at mainbus0 apid 5: Intel 686-class, 2527MHz, id 0x20655
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20100528
acpi0: X/RSDT: OemId <LENOVO,TP-6M   ,00001240>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU4 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU5 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU6 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU7 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, LEN0015) (aux port): irq 12
TPM (SMO1200) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpiwmi0 at acpi0 (WMI1, pnp0c14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpitz0 at acpi0 (THM0): ACPI Thermal Zone
acpitz0: critical 103.0 C, passive 91.5 C, passive cooling
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Passthrough, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0044 (rev. 0x02)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0045 (rev. 0x02)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0a6c (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0 vendor 0x10DE product 0x000B nid 0x01 (firmware 
configuration)
hdafg0: DAC00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 48000Hz 16/16*
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0 vendor 0x10DE product 0x000B nid 0x01 (firmware 
configuration)
hdafg1: DAC00 2ch: Digital Out [Jack]
hdafg1: 2ch/0ch 48000Hz 16/16*
audio1 at hdafg1: full duplex, playback, capture, independent
hdafg2 at hdaudio0 vendor 0x10DE product 0x000B nid 0x01 (firmware 
configuration)
hdafg2: DAC00 2ch: Digital Out [Jack]
hdafg2: 2ch/0ch 48000Hz 16/16*
audio2 at hdafg2: half duplex, capture
hdafg3 at hdaudio0 vendor 0x10DE product 0x000B nid 0x01 (firmware 
configuration)
hdafg3: DAC00 2ch: Digital Out [Jack]
hdafg3: 2ch/0ch 48000Hz 16/16*
audio3 at hdafg3: half duplex, capture
vendor 0x8086 product 0x3b64 (miscellaneous communications, revision 0x06) at 
pci0 dev 22 function 0 not configured
vendor 0x8086 product 0x3b67 (serial communications, interface 0x02, revision 
0x06) at pci0 dev 22 function 3 not configured
wm0 at pci0 dev 25 function 0: PCH LAN (82577LM) Controller, rev. 6
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address f0:de:f1:01:6b:98
ukphy0 at wm0 phy 2: OUI 0x00aa00, model 0x0005, rev. 3
ukphy0: no media present
ifmedia_set: no match for 0x20/0xfffffff
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x06)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 17
hdafg4 at hdaudio1 vendor 0x14F1 product 0x5069 nid 0x01 (firmware 
configuration)
hdafg4: DAC00 2ch: HP Out [Jack]
hdafg4: ADC01 2ch: Mic In [Jack]
hdafg4: DAC02 2ch: Speaker [Built-In]
hdafg4: ADC03 2ch: Mic In [Built-In]
hdafg4: 2ch/2ch 44100Hz 48000Hz 96000Hz 16/16 20/32 24/32
audio4 at hdafg4: full duplex, playback, capture, independent
hdvsmfg at hdaudio1 vendor 0x14F1 product 0x5069 nid 0x02 not configured
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x06)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x3b44 (rev. 0x06)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci3 dev 0 function 0: vendor 0x8086 product 0x0084 (rev. 0x00)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 1T2R, BGS, address 00:26:c7:5a:b1:86
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x3b48 (rev. 0x06)
ppb3: unsupported PCI Express version
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x3b4a (rev. 0x06)
ppb4: unsupported PCI Express version
pci5 at ppb4 bus 13
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci5 dev 0 function 0: vendor 0x1180 product 0xe822 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 16
sdmmc0 at sdhc0
vendor 0x1180 product 0xe230 (miscellaneous system, revision 0x01) at pci5 dev 
0 function 1 not configured
fwohci0 at pci5 dev 0 function 3: vendor 0x1180 product 0xe832 (rev. 0x01)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 f0:de:f1:ff:01:6b:98:ff
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x06)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xa6)
pci6 at ppb5 bus 14
pci6: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3b07 (rev. 0x06)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b2f
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 0x10300, 6 ports, 32 command slots, features 0xff20e060
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3b30 (rev. 0x06)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
vendor 0x8086 product 0x3b32 (miscellaneous DASP, revision 0x06) at pci0 dev 31 
function 6 not configured
isa0 at pcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <ST9500420AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ890, UG99  098100, SB01> cdrom 
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, 
addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, 
addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
uvideo0 at uhub2 port 6 configuration 1 interface 0: Chicony Electronics Co., 
Ltd. Integrated Camera, rev 2.00/23.45, addr 4
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev 
2.00/23.45, addr 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio5 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
===>8===>8===

Any help would be greatly appreciated.
>How-To-Repeat:
Install NetBSD-current for amd64 on a ThinkPad T510.
>Fix: