kern/42618: slow or no boot of netbsd-5.x unless acpi disabled, messages: viaide0 lost interrupt

[oivulf%gmail.com@localhost]

>Number:         42618
>Category:       kern
>Synopsis:       slow or no boot of netbsd-5.x unless acpi disabled, messages: 
>viaide0 lost interrupt
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Jan 14 11:05:00 +0000 2010
>Originator:     fulvio ciriaco
>Release:        5.99.23
>Organization:
>Environment:
NetBSD  5.99.23 NetBSD 5.99.23 (GENERIC) #0: Mon Jan 11 17:47:30 UTC 2010  
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201001110000Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
 i386

>Description:
The system does not boot or boots really slowly unless acpi disabled.
The problem is related to access to wd0d and lost interrupts on viaide0.
This happens both with NetBSD 5.0.1 and with latest 5.99.23.
Usually no problem or warning with acpi disabled.
Below I report dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.23 (GENERIC) #0: Mon Jan 11 17:47:30 UTC 2010
        
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201001110000Z-obj/home/b$
total memory = 958 MB
avail memory = 931 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MICRO-STAR INTERNATIONAL CO., LTD MS-7312 (1.00)
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0 apid 0: AMD 686-class, 2100MHz, id 0x60fb1
cpu1 at mainbus0 apid 1: AMD 686-class, 2100MHz, id 0x60fb1
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1106 product 0x0204 (rev. 0x00)
agp0 at pchb0: 1 Miscellaneous Control unit(s) found.
agp0: aperture at 0xe8000000, size 0x8000000
pchb1 at pci0 dev 0 function 1: vendor 0x1106 product 0x1204 (rev. 0x00)
pchb2 at pci0 dev 0 function 2: vendor 0x1106 product 0x2204 (rev. 0x00)
pchb3 at pci0 dev 0 function 3: vendor 0x1106 product 0x3204 (rev. 0x00)
pchb4 at pci0 dev 0 function 4: vendor 0x1106 product 0x4204 (rev. 0x00)
pchb5 at pci0 dev 0 function 7: vendor 0x1106 product 0x7204 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3108 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
viaide0 at pci0 dev 15 function 0: VIA Technologies VT8237 SATA Controller (rev$
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: using ioapic0 pin 20 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21
usb3 at uhci3: USB revision 1.0
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
viapcib0 at pci0 dev 17 function 0: vendor 0x1106 product 0x3227 (rev. 0x00)
viapcib0: SMBus found at 0x5000 (revision 0x0)
iic0 at viapcib0: I2C bus
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, playback, capture, independent
vr0 at pci0 dev 18 function 0: vendor 0x1106 product 0x3065 (rev. 0x78)
vr0: interrupting at ioapic0 pin 23
vr0: Ethernet address: 00:19:db:aa:9c:94
rlphy0 at vr0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pchb6 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb7 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb8 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3: AMD CPU Temperature Sensors (K8: core rev B$
isa0 at viapcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viaide0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <STM3250318AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST CD-RW GCE-8240B, , 1.07> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(viaide1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

>How-To-Repeat:

>Fix: