port-i386/40507: AR5005G - ath0: unable to attach hardware; HAL status 3

[dalibor.gudzic%gmail.com@localhost]

>Number:         40507
>Category:       port-i386
>Synopsis:       AR5005G - ath0: unable to attach hardware; HAL status 3
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Jan 28 18:45:00 +0000 2009
>Originator:     Dalibor Gudzic
>Release:        NetBSD 5.0_BETA
>Organization:
>Environment:
NetBSD 5.0_BETA (GENERIC) #0: Wed Dec 31 00:05:12 UTC 2008
        
builds%b0.netbsd.org@localhost:/home/builds/ab/netbsd-5/i386/200812300000Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
>Description:
NetBSD has recognized Atheros AR5005G wireless card, but cannot "attach" it, 
therefore not usable. It doesn't work on FreeBSD or OpenBSD either, but works 
on Fedora 10.
This is on Fujitsu Siemens Amilo Pro V3515 laptop. Attached are dmesg and 
scanpci outputs.

dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_BETA (GENERIC) #0: Wed Dec 31 00:05:12 UTC 2008
        
builds%b0.netbsd.org@localhost:/home/builds/ab/netbsd-5/i386/200812300000Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
total memory = 1470 MB
avail memory = 1433 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU SIEMENS AMILO PRO V3515 (20)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1729MHz, id 0x6e8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfecc0000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <FSC   ,PC      ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 10
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, STL3842): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PS2K, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: DPK , Lion, DPK-LMXXSS6 
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 59.8C critical 109.8C passive 
38.8C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0364 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xc0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1364 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2364 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3364 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4364 (rev. 0x00)
vendor 0x1106 product 0x5364 (interrupt system, interface 0x20) at pci0 dev 0 
function 5 not configured
pchb5 at pci0 dev 0 function 6
pchb5: vendor 0x1106 product 0x6364 (rev. 0x00)
pchb6 at pci0 dev 0 function 7
pchb6: vendor 0x1106 product 0x7364 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3371 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb1 at pci0 dev 2 function 0: vendor 0x1106 product 0xa364 (rev. 0x80)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 0: vendor 0x1106 product 0xc364 (rev. 0x80)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237A SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: using ioapic0 pin 21 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237A ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel ignored (disabled)
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15
atabus2 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0xa0)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0xa0)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0xa0)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0xa0)
uhci3: interrupting at ioapic0 pin 23
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21
ehci0: dropped intr workaround enabled
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3337 (rev. 0x00)
pchb7 at pci0 dev 17 function 7
pchb7: vendor 0x1106 product 0x287e (rev. 0x00)
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at ioapic0 pin 23
vr0: Ethernet address: 00:14:0b:08:64:5b
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb3 at pci0 dev 19 function 0: vendor 0x1106 product 0x337b (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
azalia0 at pci4 dev 1 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x1106/0x3288 (rev. 16), HDA rev. 1.0
ppb4 at pci0 dev 19 function 1: vendor 0x1106 product 0x337a (rev. 0x00)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
ath0 at pci5 dev 1 function 0
ath0: interrupting at ioapic0 pin 18
ath0: unable to attach hardware; HAL status 3
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1729102440 Hz quality 3000
acpiacad0: AC adapter online.
azalia0: codec[0]: 0x14f1/0x5045 (rev. 1.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viaide0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <WDC WD600BEVS-07LAT0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-T10N, M006BM21412, PW02> cdrom 
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
umass0 at uhub4 port 3 configuration 1 interface 0
umass0: vendor 0x3538 USB Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic, USB Flash Disk, 0.00> disk removable
sd0: 984 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 2015232 sectors
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
findroot: unable to read block 30716281
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

scanpci:

pci bus 0x0005 cardnum 0x01 function 0x00: vendor 0x168c device 0x001a
 Atheros Communications, Inc. AR5005G 802.11abg NIC
 CardVendor 0x168c card 0x2052 (Atheros Communications, Inc. Compex Wireless 
802.11 b/g  MiniPCI Adapter, Rev A1 [WLM54G])
  STATUS    0x0290  COMMAND 0x0116
  CLASS     0x02 0x00 0x00  REVISION 0x01
  BIST      0x00  HEADER 0x00  LATENCY 0x50  CACHE 0x08
  BASE0     0xc9000000  addr 0xc9000000  MEM
  MAX_LAT   0x1c  MIN_GNT 0x0a  INT_PIN 0x01  INT_LINE 0x0a

pci bus 0x0005 cardnum 0x01 function 0x01: vendor 0x168c device 0xff96
 Atheros Communications, Inc.  Device unknown
 CardVendor 0x168c card 0xee96 (Card unknown)
  STATUS    0x0290  COMMAND 0x0000
  CLASS     0x07 0x00 0x02  REVISION 0x01
  BIST      0x00  HEADER 0x80  LATENCY 0x00  CACHE 0x00
  BASE0     0x00000001  addr 0x00000000  I/O
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE 0x00

>How-To-Repeat:
Install NetBSD on Fujitsu Siemens Amilo Pro V3515 and boot.
>Fix: