Re: kern/40008 (netbsd-5 hangs on boot with ACPI on an ASUS a7n8x deluxe)

[Jasper Wallace <jasper%pointless.net@localhost>]

The following reply was made to PR kern/40008; it has been noted by GNATS.

From: Jasper Wallace <jasper%pointless.net@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: joerg%NetBSD.org@localhost, kern-bug-people%netbsd.org@localhost, 
netbsd-bugs%netbsd.org@localhost, 
    gnats-admin%netbsd.org@localhost, joerg%NetBSD.org@localhost
Subject: Re: kern/40008 (netbsd-5 hangs on boot with ACPI on an ASUS a7n8x
 deluxe)
Date: Tue, 25 Nov 2008 20:46:04 +0000 (GMT)

 On Mon, 24 Nov 2008, joerg%NetBSD.org@localhost wrote:
 
 > Synopsis: netbsd-5 hangs on boot with ACPI on an ASUS a7n8x deluxe
 > 
 > Can you please test boot -c and
 > disable ioapic
 > and report whether this fixes the problem.
 
 no, it hangs after fdc0:
 
 >> NetBSD/x86 BIOS Boot, Revision 5.2 (from NetBSD 5.0_BETA)
 >> Memory: 640/2096064 k
 > 
 > boot -svxc
 booting hd2a:netbsd (howto 0xa1002)
 -9758844+423748+615696- [502272+484503]=0xb3ef80
 BIOS CFG: Model-SubM-Rev: fc-01-00, 0x70<KBDINT,RTC,IC2>
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 5.0_BETA (GENERIC) #0: Sun Nov 23 11:36:42 GMT 2008
        root@meep-meep:/usr/obj/sys/arch/i386/compile/GENERIC
 total memory = 2047 MB
 rbus: rbus_min_start set to 0x80000000
 avail memory = 2000 MB
 timecounter: Timecounters tick every 10.000 msec
 userconf: configure system autoconfiguration:
 uc> disable ioapic
 [240] ioapic* disabled
 uc> quit
 Continuing...
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 BIOS32 rev. 0 found at 0xfb470
 SMBIOS rev. 2.2 @ 0xf0000 (43 entries)
 ASUSTeK Computer INC. A7N8X (REV 1.xx)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0cpu0: 8 page colors
 cpu0: calibrating local timer
 cpu0: apic clock running at 334 MHz
 timecounter: Timecounter "lapic" frequency 334247118 Hz quality -100
 : AMD 686-class, 2088MHz, id 0x681
 ioapic at mainbus0 apid 2 not configured
 acpi0 at mainbus0: Intel ACPICA 20080321
 acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
 APCS: Links after initial probe:
 Link Device APCS:
 Index  IRQ  Rtd  Ref  IRQs
     0   23   N     0  23 polarity 0 trigger 0
 
 APCS: Links after initial validation:
 Link Device APCS:
 Index  IRQ  Rtd  Ref  IRQs
     0   23   N     0  23 polarity 0 trigger 0
 
 APCS: Links after disable:
 Link Device APCS:
 Index  IRQ  Rtd  Ref  IRQs
     0   23   Y     0  23 polarity 0 trigger 0
 
 APCF: Links after initial probe:
 Link Device APCF:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCF: Links after initial validation:
 Link Device APCF:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCF: Links after disable:
 Link Device APCF:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCG: Links after initial probe:
 Link Device APCG:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCG: Links after initial validation:
 Link Device APCG:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCG: Links after disable:
 Link Device APCG:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCL: Links after initial probe:
 Link Device APCL:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCL: Links after initial validation:
 Link Device APCL:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCL: Links after disable:
 Link Device APCL:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCH: Links after initial probe:
 Link Device APCH:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCH: Links after initial validation:
 Link Device APCH:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCH: Links after disable:
 Link Device APCH:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCI: Links after initial probe:
 Link Device APCI:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCI: Links after initial validation:
 Link Device APCI:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCI: Links after disable:
 Link Device APCI:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCJ: Links after initial probe:
 Link Device APCJ:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCJ: Links after initial validation:
 Link Device APCJ:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCJ: Links after disable:
 Link Device APCJ:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCK: Links after initial probe:
 Link Device APCK:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCK: Links after initial validation:
 Link Device APCK:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCK: Links after disable:
 Link Device APCK:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCM: Links after initial probe:
 Link Device APCM:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCM: Links after initial validation:
 Link Device APCM:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCM: Links after disable:
 Link Device APCM:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 AP3C: Links after initial probe:
 Link Device AP3C:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 AP3C: Links after initial validation:
 Link Device AP3C:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 AP3C: Links after disable:
 Link Device AP3C:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCZ: Links after initial probe:
 Link Device APCZ:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCZ: Links after initial validation:
 Link Device APCZ:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APCZ: Links after disable:
 Link Device APCZ:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  20 21 22 polarity 0 trigger 0
 
 APC1: Links after initial probe:
 Link Device APC1:
 Index  IRQ  Rtd  Ref  IRQs
     0   16   N     0  16 polarity 0 trigger 0
 
 APC1: Links after initial validation:
 Link Device APC1:
 Index  IRQ  Rtd  Ref  IRQs
     0   16   N     0  16 polarity 0 trigger 0
 
 APC1: Links after disable:
 Link Device APC1:
 Index  IRQ  Rtd  Ref  IRQs
     0   16   Y     0  16 polarity 0 trigger 0
 
 APC2: Links after initial probe:
 Link Device APC2:
 Index  IRQ  Rtd  Ref  IRQs
     0   17   N     0  17 polarity 0 trigger 0
 
 APC2: Links after initial validation:
 Link Device APC2:
 Index  IRQ  Rtd  Ref  IRQs
     0   17   N     0  17 polarity 0 trigger 0
 
 APC2: Links after disable:
 Link Device APC2:
 Index  IRQ  Rtd  Ref  IRQs
     0   17   Y     0  17 polarity 0 trigger 0
 
 APC3: Links after initial probe:
 Link Device APC3:
 Index  IRQ  Rtd  Ref  IRQs
     0   18   N     0  18 polarity 0 trigger 0
 
 APC3: Links after initial validation:
 Link Device APC3:
 Index  IRQ  Rtd  Ref  IRQs
     0   18   N     0  18 polarity 0 trigger 0
 
 APC3: Links after disable:
 Link Device APC3:
 Index  IRQ  Rtd  Ref  IRQs
     0   18   Y     0  18 polarity 0 trigger 0
 
 APC4: Links after initial probe:
 Link Device APC4:
 Index  IRQ  Rtd  Ref  IRQs
     0   19   N     0  19 polarity 0 trigger 0
 
 APC4: Links after initial validation:
 Link Device APC4:
 Index  IRQ  Rtd  Ref  IRQs
     0   19   N     0  19 polarity 0 trigger 0
 
 APC4: Links after disable:
 Link Device APC4:
 Index  IRQ  Rtd  Ref  IRQs
     0   19   Y     0  19 polarity 0 trigger 0
 
 APC5: Links after initial probe:
 Link Device APC5:
 Index  IRQ  Rtd  Ref  IRQs
     0   16   N     0  16 polarity 0 trigger 0
 
 APC5: Links after initial validation:
 Link Device APC5:
 Index  IRQ  Rtd  Ref  IRQs
     0   16   N     0  16 polarity 0 trigger 0
 
 APC5: Links after disable:
 Link Device APC5:
 Index  IRQ  Rtd  Ref  IRQs
     0   16   Y     0  16 polarity 0 trigger 0
 
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 attimer1 at acpi0 (TMR, PNP0100): AT Timer
 attimer1: io 0x40-0x43 irq 0
 pcppi1 at acpi0 (SPKR, PNP0800)
 pcppi1: io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 npx1 at acpi0 (COPR, PNP0C04)
 npx1: io 0xf0-0xff irq 13
 npx1: reported by CPUID; using exception 16
 FDC0 (PNP0700) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 UAR2 (PNP0501) at acpi0 not configured
 ECP1 (PNP0401) at acpi0 not configured
 pckbc1 at acpi0 (PS2K, PNP0303): kbd port
 pckbc1: io 0x60,0x64 irq 1
 mpu0 at acpi0 (MIDI, PNPB006)
 mpu0: io 0x330-0x331 irq 10
 midi1 at mpu0: Roland MPU-401 MIDI UART (CPU-intensive output)
 mpu0: WARNING: power management not supported
 joy0 at acpi0 (GAME, PNPB02F)
 joy0: io 0x201
 joy0: joystick not connected
 joy0: WARNING: power management not supported
 apm0 at acpi0: Power Management spec V1.2
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0 mux 1
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x10de product 0x01e0 (rev. 0xa2)
 agp at pchb0 not configured
 vendor 0x10de product 0x01eb (RAM memory, revision 0xa2) at pci0 dev 0 
function 1 not configured
 vendor 0x10de product 0x01ee (RAM memory, revision 0xa2) at pci0 dev 0 
function 2 not configured
 vendor 0x10de product 0x01ed (RAM memory, revision 0xa2) at pci0 dev 0 
function 3 not configured
 vendor 0x10de product 0x01ec (RAM memory, revision 0xa2) at pci0 dev 0 
function 4 not configured
 vendor 0x10de product 0x01ef (RAM memory, revision 0xa2) at pci0 dev 0 
function 5 not configured
 pcib0 at pci0 dev 1 function 0
 pcib0: vendor 0x10de product 0x0060 (rev. 0xa3)
 nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0064 (rev. 0xa2)
 nfsmb0 at nfsmbc0 SMBus 1
 iic0 at nfsmb0: I2C bus
 nfsmb1 at nfsmbc0 SMBus 2
 iic1 at nfsmb1: I2C bus
 ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x0067 (rev. 0xa3)
 APCF: Picked IRQ 20 with weight 0
 ohci0: interrupting at irq 12
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 usb0: WARNING: power management not supported
 ohci1 at pci0 dev 2 function 1: vendor 0x10de product 0x0067 (rev. 0xa3)
 APCG: Picked IRQ 21 with weight 0
 ohci1: interrupting at irq 5
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 usb1: WARNING: power management not supported
 ehci0 at pci0 dev 2 function 2: vendor 0x10de product 0x0068 (rev. 0xa3)
 APCL: Picked IRQ 22 with weight 0
 ehci0: interrupting at irq 12
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 4 ports each: ohci0 ohci1
 usb2 at ehci0: USB revision 2.0
 usb2: WARNING: power management not supported
 nfe0 at pci0 dev 4 function 0: vendor 0x10de product 0x0066 (rev. 0xa1)
 APCH: Picked IRQ 20 with weight 1
 nfe0: interrupting at irq 5
 nfe0: Ethernet address 00:e0:18:fc:a3:90
 rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1
 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 vendor 0x10de product 0x006b (audio multimedia, revision 0xa2) at pci0 dev 5 
function 0 not configured
 auich0 at pci0 dev 6 function 0: nForce2 MCP-T AC-97 Audio
 APCJ: Picked IRQ 21 with weight 1
 auich0: interrupting at irq 12
 auich0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
 auich0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
 ppb0 at pci0 dev 8 function 0: vendor 0x10de product 0x006c (rev. 0xa3)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 satalink0 at pci1 dev 11 function 0
 satalink0: Silicon Image SATALink 3112 (rev. 0x02)
 satalink0: SATALink BA5 register space disabled
 satalink0: bus-master DMA support present
 satalink0: primary channel wired to native-PCI mode
 satalink0: using irq 11 for native-PCI interrupt
 atabus0 at satalink0 channel 0
 satalink0: secondary channel wired to native-PCI mode
 atabus1 at satalink0 channel 1
 satalink0: WARNING: power management not supported
 viaide0 at pci0 dev 9 function 0
 viaide0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to compatibility mode
 viaide0: primary channel interrupting at irq 14
 atabus2 at viaide0 channel 0
 viaide0: secondary channel configured to compatibility mode
 viaide0: secondary channel interrupting at irq 15
 atabus3 at viaide0 channel 1
 ppb1 at pci0 dev 12 function 0: vendor 0x10de product 0x006d (rev. 0xa3)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 ex0 at pci2 dev 1 function 0: 3Com 3c905CX-TX 10/100 Ethernet with mngmt (rev. 
0x40)
 AP3C: Picked IRQ 22 with weight 1
 ex0: interrupting at irq 12
 ex0: MAC address 00:e0:18:f1:9f:dd
 acphy0 at ex0 phy 2: AC101L 10/100 media interface, rev. 1
 acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 ex0: going to power state D3
 fwohci0 at pci0 dev 13 function 0: vendor 0x10de product 0x006e (rev. 0xa3)
 APCM: Picked IRQ 20 with weight 2
 fwohci0: interrupting at irq 11
 fwohci0: OHCI version 1.10 (ROM=0)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:e0:18:00:00:12:76:f1
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 ppb2 at pci0 dev 30 function 0: vendor 0x10de product 0x01e8 (rev. 0xa2)
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled
 vga1 at pci3 dev 0 function 0: vendor 0x10de product 0x02e1 (rev. 0xa2)
 wsdisplay0 at vga1 kbdmux 1
 wsmux1: connecting to wsdisplay0
 wskbd0: connecting to wsdisplay0
 drm at vga1 not configured
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com0: console
 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 fatal breakpoint trap in supervisor mode
 trap type 1 code 0 eip c0533acc cs 8 eflags 202 cr2 0 ilevel 8
 Stopped in pid 0.1 (system) at  netbsd:breakpoint+0x4:  popl    %ebp
 db{0}> bt
 breakpoint(0,3f8,5,c0b01e60,c0b01e60,ccd50b70,c0b18d00,c32d5000,c32d6000,800) 
at
  netbsd:breakpoint+0x4
 comintr(ccd50a64,ccc41f34,6,10,30,10,10,c48000,0,c3187400) at 
netbsd:comintr+0x5
 75
 Xintr_legacy4() at netbsd:Xintr_legacy4+0xbb
 --- interrupt ---
 fatal page fault in supervisor mode
 trap type 6 code 0 eip c0535fa7 cs 8 eflags 10206 cr2 3e ilevel 8
 kernel: supervisor trap page fault, code=0
 Faulted in DDB; continuing...
 db{0}> machine cpu
 addr            dev     id      flags   ipis    curlwp          fpcurlwp
 0xc0a6a240      cpu0    0       3009    0       0xc0a673e0             0x0
 db{0}> callout
 hardclock_ticks now: 0
     ticks  wheel               arg  func
       100 -1/-256         ccd63000  firewire_watchdog
       100 -1/-256         ccc5c000  ohci_rhsc_enable
 db{0}> ps
  PID           PPID     PGRP        UID S   FLAGS LWPS          COMMAND    WAIT
 >0               -1        0          0 2 0x20002   19           system       *
 db{0}> reboot
 Shutting down devices: attempting wsdisplay0 shutdown attempting acphy0 
shutdown attempting atabus1 shutdown attempting atabus0 shutdown attempting 
fdc0 shutdown attempting com1 shutdown attempting com0 shutdown attempting lpt0 
shutdown attempting vga1 shutdown attempting fwip0 shutdown attempting ex0 
shutdownex0: going to power state D0
  attempting satalink0 shutdown(skipped) attempting iic1 shutdown attempting 
iic0 shutdown attempting wskbd0 shutdown attempting isa0 shutdown attempting 
pci3 shutdown attempting ieee1394if0 shutdown attempting pci2 shutdown 
attempting atabus3 shutdown attempting atabus2 shutdown attempting pci1 
shutdown attempting rlphy0 shutdown attempting usb2 shutdown(skipped) 
attempting usb1 shutdown(skipped) attempting usb0 shutdown(skipped) attempting 
nfsmb1 shutdown attempting nfsmb0 shutdown attempting pckbd0 shutdown 
attempting midi1 shutdown attempting sysbeep0 shutdown attempting midi0 
shutdown attempting ppb2 shutdown attempting fwohci0 shutdown attempting ppb1 
shutdown attempting viaide0 shutdown attempting ppb0 shutdown attempting auich0 
shutdown attempting nfe0 shutdown attempting ehci0 shutdown attempting ohci1 
shutdown attempting ohci0 shutdown attempting nfsmbc0 shutdown attempting pcib0 
shutdown attempting pchb0 shutdown attempting apm0 shutdown attempting joy0 
shutdown(sk
 i
  pped) attempting mpu0 shutdown(skipped) attempting pckbc1 shutdown attempting 
npx1 shutdown attempting pcppi1 shutdown attempting attimer1 shutdown 
attempting acpibut0 shutdown attempting pci0 shutdown attempting acpi0 shutdown 
attempting cpu0 shutdown attempting mainbus0 shutdown.
 
 The operating system has halted.
 Please press any key to reboot.
 
 rebooting...
 
 
 -- 
 [http://pointless.net/]                                   [0x2ECA0975]