NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kern/38540 feedback panic: mpacpi_findintr_linkdev: irq mismatch
The following reply was made to PR kern/38540; it has been noted by GNATS.
From: Heron Gallegos <gallegos%csxxi.net.mx@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: joerg%netbsd.org@localhost
Subject: Re: kern/38540 feedback panic: mpacpi_findintr_linkdev: irq mismatch
Date: Thu, 4 Sep 2008 13:39:16 -0500 (CDT)
Hello
My home server was working with 4.99.32 (acpi) without problems.
It is a mini-ITX motherboard MSI MS-7199 VIA C7/CN700/VT8237R+
Last weekend I installed /pub/NetBSD-daily/HEAD/200808270002Z/iso/i386cd.iso
using the option *disable ACPI* of the install CD because it
can not boot in *normal mode*.
4.99.72 works fine except when I try boot it using
normal mode (using ACPI), the machine enters in panic state.
The following dmesg listings are *with* and *without* ACPI.
It is a GENERIC kernel except this two lines:
options RTC_OFFSET=360
options ACPIVERBOSE
I will be glad if you ask me for more tests.
Have a nice day.
Heron Gallegos
Saltillo Coahuila Mexico
>> NetBSD/x86 BIOS Boot, Revision 5.1 (from NetBSD 4.99.72)
>> Memory: 638/505792 k
> boot netbsd -v
booting hd0a:netbsd (howto 0x20000)
9657916+422212+614896 [495872+476647]=0xb21eb0
BIOS CFG: Model-SubM-Rev: fc-01-00, 0x74<EBDA,KBDINT,RTC,IC2>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.72 (POLARIS) #0: Mon Sep 1 19:32:23 CDT 2008
gallegos@polaris:/sys/arch/i386/compile/POLARIS
total memory = 494 MB
avail memory = 474 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MICRO-STAR INTERNATIONAL CO., LTD MS-7199 (1.00)
mainbus0 (root)
cpu0 at mainbus0 apid 0timecounter: Timecounter "lapic" frequency 100050920 Hz
quality -100
: IDT/VIA 686-class, 999MHz, id 0x6a9
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 900 800
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <CN700 ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
ALKB: Links after initial probe:
Link Device ALKB:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKB: Links after initial validation:
Link Device ALKB:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKB: Links after disable:
Link Device ALKB:
Index IRQ Rtd Ref IRQs
0 11 Y 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKB: ACPI: Found matching pin for 0.16.INTA at func 0: 10
ALKB: BIOS IRQ 10 does not match initial IRQ 11
ALKB: ACPI: Found matching pin for 0.16.INTB at func 2: 11
ALKB: BIOS IRQ 11 for 0.16.INTB does not match previous BIOS IRQ 10
ALKB: ACPI: Found matching pin for 0.16.INTC at func 4: 5
ALKB: BIOS IRQ 5 for 0.16.INTC does not match previous BIOS IRQ 10
ALKA: Links after initial probe:
Link Device ALKA:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKA: Links after initial validation:
Link Device ALKA:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKA: Links after disable:
Link Device ALKA:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKC: Links after initial probe:
Link Device ALKC:
Index IRQ Rtd Ref IRQs
0 5 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKC: Links after initial validation:
Link Device ALKC:
Index IRQ Rtd Ref IRQs
0 5 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKC: Links after disable:
Link Device ALKC:
Index IRQ Rtd Ref IRQs
0 5 Y 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKD: Links after initial probe:
Link Device ALKD:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKD: Links after initial validation:
Link Device ALKD:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKD: Links after disable:
Link Device ALKD:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
ALKD: ACPI: Found matching pin for 0.18.INTA at func 0: 10
ALKA: ACPI: Found matching pin for 0.15.INTA at func 1: 255
ALKA: ACPI: Found matching pin for 0.15.INTB at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
UAR2 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 80.0C critical 80.0C passive
41.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0314 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xf8000000, size 0xe800000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1314 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2314 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3208 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4314 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7314 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3344 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
panic: mpacpi_findintr_linkdev: irq mismatch
fatal breakpoint trap in supervisor mode
trap type 1 code 0 eip c052b71c cs 8 eflags 246 cr2 0 ilevel 8
Stopped in pid 0.1 (system) at netbsd:breakpoint+0x4: popl %ebp
db{0}> bt
breakpoint(c0a27004,c0c256f4,c0a50fc0,c02d6fb1,8,c0ad4e60,d,c0476a12,20,200)
at n
etbsd:breakpoint+0x4
panic(c09f4858,0,c0c25718,c0c25714,c0c25710,c0aed020,c0aed024,f4ff,0,1) at
netbs
d:panic+0x1b8
mpacpi_nonpci_intr(c167f818,0,7,0,0,0,c0a07aa0,73,c0a07a72,0) at
netbsd:mpacpi_n
onpci_intr
intr_find_mpmapping(0,3d,c0c257e8,c0c25794,c0c25790,5,b000000,0,0,f) at
netbsd:i
ntr_find_mpmapping+0x61
pci_intr_map(c0c25a3c,c0c257e8,0,0,c0c25814,c0a07a87,8,c0c25808,c0a07a68,caf8452
0) at netbsd:pci_intr_map+0x99
pciide_mapregs_native(c0c25a3c,caf84610,c0c25868,c0c25864,c05923d0,c0c25868,c0c2
5a3c,c1662000,caf84610,caf84520) at netbsd:pciide_mapregs_native+0x26f
pciide_mapchan(c0c25a3c,caf84610,8f,c0c25868,c0c25864,c05923d0,c0a057b3,7,c0c25a
3c,8f) at netbsd:pciide_mapchan+0x54
via_sata_chip_map(caf84520,c0c25a3c,c0a09d24,80,0,80007800,0,c02d6fb1,8,c0c258b4
) at netbsd:via_sata_chip_map+0x20a
pciide_common_attach(caf84520,c0c25a3c,c08af020,c04779e6,1f84c10,cae41c4c,c09ebe
be,c0a3eda0,c09b7d50,0) at netbsd:pciide_common_attach+0xc1
viaide_attach(cae41c30,caf84c10,c0c25a3c,c0c25a78,c0c25a3c,0,caf84c10,c05631c0,c
ae3d000,0) at netbsd:viaide_attach+0x44
config_attach_loc(cae41c30,c0a3d720,c0c25a78,c0c25a3c,c05631c0,c046a6a0,c0c25aa8
,c0476b3c,31491106,2900007) at netbsd:config_attach_loc+0x163
pci_probe_device(cae3d000,80007800,0,0,0,c07fc464,0,8,0,80007800) at
netbsd:pci_
probe_device+0x240
pci_enumerate_bus(cae3d000,c07fc460,0,0,c0c25b08,c0c25b04,c0c25b38,c056358e,cae4
1c30,c09b85b8) at netbsd:pci_enumerate_bus+0x187
pcirescan(cae41c30,c09b85b8,c07fc460,c046b28d,c0ad5144,ca8edb00,cae41c30,cae3d00
0,2,8) at netbsd:pcirescan+0x2c
pciattach(cadb05ec,cae41c30,c0c25bdc,0,c0c25bdc,10,cae41c30,0,c09b85bc,c09b85bc)
at netbsd:pciattach+0x18e
config_attach_loc(cadb05ec,c0a3d420,0,c0c25bdc,c0566a30,0,c0c25bb8,c0522817,cadb
05ec,c09b8813) at netbsd:config_attach_loc+0x163
config_found_ia(cadb05ec,c09b8813,c0c25bdc,c0566a30,0,0,0,cadb05ec,1,c0c25c00)
a
t netbsd:config_found_ia+0x32
mpacpi_scan_pci(cadb05ec,c0c25bdc,c0566a30,0,ca8eef50,c0c25bdc,1,0,0,1) at
netbs
d:mpacpi_scan_pci+0xa7
mainbus_attach(0,cadb05ec,0,c046a81e,c09b7ca0,c09b7ca0,cadb05ec,0,c09b7ca0,2)
at
netbsd:mainbus_attach+0x23c
config_attach_loc(0,c0a3d408,0,0,0,2,c0c25c98,c046bdc4,0,c0a3d408) at
netbsd:con
fig_attach_loc+0x163
config_attach(0,c0a3d408,0,0,a,14,c0c25cb8,c052b2f8,c09b7ca0,0) at
netbsd:config
_attach+0x2c
config_rootfound(c09b7ca0,0,0,a,14,a,c0c25ce8,c046bf6d,c0a4b540,2) at
netbsd:con
fig_rootfound+0x44
cpu_configure(c0a4b540,2,c0c25ce8,c041ed54,c0ae7764,a,c0c25ce8,c04cb6c3,c0b025a0
,a) at netbsd:cpu_configure+0x28
configure(c0ae6bc0,a,14,f9300,0,0,0,0,0,0) at netbsd:configure+0x3d
main(0,c01002cd,0,0,0,0,0,0,0,0) at netbsd:main+0x1aa
db{0}>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.72 (POLARIS) #0: Mon Sep 1 19:32:23 CDT 2008
gallegos@polaris:/sys/arch/i386/compile/POLARIS
total memory = 494 MB
avail memory = 474 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MICRO-STAR INTERNATIONAL CO., LTD MS-7199 (1.00)
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0 apid 0timecounter: Timecounter "lapic" frequency 100047676 Hz
quality -100
: IDT/VIA 686-class, 999MHz, id 0x6a9
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 900 800
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0314 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xf8000000, size 0xe800000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1314 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2314 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3208 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4314 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7314 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3344 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: using ioapic0 pin 20 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel ignored (disabled)
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3227 (rev. 0x00)
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at ioapic0 pin 23
vr0: Ethernet address: 00:19:db:29:9e:18
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 999948340 Hz quality -100
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viaide0 port 0: device present, speed: 1.5Gb/s
viaide0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <WDC WD3200AAKS-00B3A0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0: <WDC WD3200AAKS-00B3A0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index