port-amd64/38337: Clock running too fast after upgrade to 4.0

[harding.ian%gmail.com@localhost]

>Number:         38337
>Category:       port-amd64
>Synopsis:       Clock running too fast after upgrade to 4.0
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-amd64-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Mar 29 23:20:00 +0000 2008
>Originator:     Ian Harding
>Release:        NetBSD 4.0
>Organization:
>Environment:
NetBSD www.gmpartswiki.com 4.0 NetBSD 4.0 (gmpartswiki) #0: Wed Mar 26 04:18:07 
PDT 2008  
iharding%www.gmpartswiki.com@localhost:/usr/obj/sys/arch/amd64/compile/gmpartswiki
 amd64
>Description:
After upgrade to 4.0, my clock runs away.  I couldn't find any interesting 
hints on Google, so here I am.  I took GENERIC.MP and simply increased the 
SHMMAXPGS when I recompiled.  

dmesg:

at pci0 dev 4 function 0: NVIDIA product 0x03f3 (rev. 0xa1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
tlp0 at pci1 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
APC1: Picked IRQ 16 with weight 0
tlp0: interrupting at ioapic0 pin 16 (irq 5)
tlp0: Ethernet address 00:08:a1:0a:31:75
dmphy0 at tlp0 phy 1: DM9102 10/100 media interface, rev. 0
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0 at pci1 dev 8 function 0: RealTek 8169SC/8110SC Single-chip Gigabit 
Ethernet (rev. 0x10)
APC3: Picked IRQ 18 with weight 0
re0: interrupting at ioapic0 pin 18 (irq 10)
re0: Ethernet address 00:50:8d:ca:59:5c
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
azalia0 at pci0 dev 5 function 0: Generic High Definition Audio Controller
AAZA: Picked IRQ 22 with weight 0
azalia0: interrupting at ioapic0 pin 22 (irq 10)
azalia0: host: 0x10de/0x03f0 (rev. 162)
azalia0: host: High Definition Audio rev. 1.0
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA MCP61 IDE Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 8 function 0
viaide1: NVIDIA MCP61 Serial ATA Controller (rev. 0xa2)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
APSI: Picked IRQ 23 with weight 0
viaide1: using ioapic0 pin 23 (irq 11) for native-PCI interrupt
atabus1 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus2 at viaide1 channel 1
ppb1 at pci0 dev 9 function 0: NVIDIA nForce MCP61 PCI-PCI Bridge (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 11 function 0: NVIDIA nForce MCP61 PCI-PCI Bridge (rev. 0xa2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 12 function 0: NVIDIA nForce MCP61 PCI-PCI Bridge (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci0 dev 13 function 0: NVIDIA product 0x03d1 (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Realtek ALC883 (rev. 0.2)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM 
formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=4, encodings=1<PCM>
azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
audio0 at azalia0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON DVD C  LH52C1P, 2007030800007263, 6L14> 
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 3
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 3 (using DMA)
viaide1 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <Maxtor 6V300F0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 279 GB, 581463 cyl, 16 head, 63 sec, 512 bytes/sect x 586114704 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
uhidev0 at uhub0 port 4 configuration 1 interface 0
uhidev0: Key Tronic Keytronic USB Keyboard, rev 1.10/1.02, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
syncing disks... done
unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 
2002, 2003, 2004, 2005,
   2006, 2007
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (gmpartswiki) #0: Wed Mar 26 04:18:07 PDT 2008
       
iharding%www.gmpartswiki.com@localhost:/usr/obj/sys/arch/amd64/compile/gmpartswiki
total memory = 1982 MB
avail memory = 1899 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2009.39 MHz
cpu0: features: ffdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: ffdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: ffdbfbff<FXSR,SSE,SSE2,B27,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2: 2001<SSE3>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: 3f<STC,TM,TTP,VID,FID,TS>
cpu0: AMD PowerNow! Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2009.26 MHz
cpu1: features: ffdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: ffdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: ffdbfbff<FXSR,SSE,SSE2,B27,HTT,LONG,3DNOW2,3DNOW>
cpu1: features2: 2001<SSE3>
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 512 KB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: AMD Power Management features: 3f<STC,TM,TTP,VID,FID,TS>
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A08 [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0401 [ECP printer port] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 122.0C
acpitz0: critical 124.0C passive 40.0C
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA product 0x03ea (RAM memory, revision 0xa1) at pci0 dev 0 function 0 not 
configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA nForce MCP61 PCI-ISA Bridge (rev. 0xa2)
NVIDIA nForce MCP61 SMBus Controller (SMBus serial bus, revision 0xa2) at pci0 
dev 1 function 1 not configured
NVIDIA product 0x03f5 (RAM memory, revision 0xa2) at pci0 dev 1 function 2 not 
configured
ohci0 at pci0 dev 2 function 0: NVIDIA product 0x03f1 (rev. 0xa2)
APCF: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 2 function 1: NVIDIA product 0x03f2 (rev. 0xa2)
APCL: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
ppb0 at pci0 dev 4 function 0: NVIDIA product 0x03f3 (rev. 0xa1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
tlp0 at pci1 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
APC1: Picked IRQ 16 with weight 0
tlp0: interrupting at ioapic0 pin 16 (irq 5)
tlp0: Ethernet address 00:08:a1:0a:31:75
dmphy0 at tlp0 phy 1: DM9102 10/100 media interface, rev. 0
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0 at pci1 dev 8 function 0: RealTek 8169SC/8110SC Single-chip Gigabit 
Ethernet (rev. 0x10)
APC3: Picked IRQ 18 with weight 0
re0: interrupting at ioapic0 pin 18 (irq 10)
re0: Ethernet address 00:50:8d:ca:59:5c
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
azalia0 at pci0 dev 5 function 0: Generic High Definition Audio Controller
AAZA: Picked IRQ 22 with weight 0
azalia0: interrupting at ioapic0 pin 22 (irq 10)
azalia0: host: 0x10de/0x03f0 (rev. 162)
azalia0: host: High Definition Audio rev. 1.0
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA MCP61 IDE Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 8 function 0
viaide1: NVIDIA MCP61 Serial ATA Controller (rev. 0xa2)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
APSI: Picked IRQ 23 with weight 0
viaide1: using ioapic0 pin 23 (irq 11) for native-PCI interrupt
atabus1 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus2 at viaide1 channel 1
ppb1 at pci0 dev 9 function 0: NVIDIA nForce MCP61 PCI-PCI Bridge (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 11 function 0: NVIDIA nForce MCP61 PCI-PCI Bridge (rev. 0xa2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 12 function 0: NVIDIA nForce MCP61 PCI-PCI Bridge (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci0 dev 13 function 0: NVIDIA product 0x03d1 (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Realtek ALC883 (rev. 0.2)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM 
formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=4, encodings=1<PCM>
azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
audio0 at azalia0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON DVD C  LH52C1P, 2007030800007263, 6L14> 
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 3
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 3 (using DMA)
viaide1 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <Maxtor 6V300F0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 279 GB, 581463 cyl, 16 head, 63 sec, 512 bytes/sect x 586114704 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
uhidev0 at uhub0 port 4 configuration 1 interface 0
uhidev0: Key Tronic Keytronic USB Keyboard, rev 1.10/1.02, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
uhidev0: at uhub0 port 4 (addr 2) disconnected
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
>How-To-Repeat:
Upgrade my particular box to NetBSD 4.0!  Watch the clock run away.
>Fix: