Number: 38220
Category: port-i386
Synopsis: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly on HP
proliant DL380 G3 (3.20 GHz uni) Confidential: no
Severity: critical
Priority: medium
Responsible: port-i386-maintainer
State: open
Class: sw-bug
Submitter-Id: net
Arrival-Date: Tue Mar 11 14:45:00 +0000 2008
Originator: Fredrik Pettai
Release: NetBSD 4.0 RELEASE
Organization:
NORDUnet A/S
Environment:
N/A
Description:
NetBSD 4.0 RELEASE (INSTALL_LARGE) installation CD does not boot on a HP
proliant DL380 G3 with a uni-processor 3.20 GHz intel XEON (HT).
I checked the BIOS version, and it's the latest version available (B29).
I also tried to disable HT in the BIOS, but that didn't help...
Linux seems to work fine on the server. I have a previous installation of
Gentoo running on this box.
Full console output from boot-up of the NetBSD 4.0 installer CD:
NetBSD/i386 BIOS Boot, Revision 3.3
(builds@wb34, Sat Dec 15 23:17:28 PST 2007)
Memory: 637/2096128 k
boot
booting cd0a:netbsd
4142492+5319748+182452 [285328+269759]=0x9bc09c
kenter: 0x00001000
acpi: wakecode is installed at 0x1000, size=376
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.0 (INSTALL_LARGE) #0: Sun Dec 16 01:44:06 PST 2007
builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/hom
e/builds/ab/netbsd-4-0-RELEASE/src /sys/arch/i386/compile/INSTALL_LAR
GE
total memory = 2047 MB
rbus: rbus_min_start set to 0x80000000
avail memory = 2002 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
cpu0 at mainbus0: apid 6 (application processor)
cpu0: not started
cpu1 at mainbus0: apid 7 (application processor)
cpu1: not started
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 4 (I/O APIC)
ioapic2: pa 0xfec02000, version 11, 16 pins
ioapic3 at mainbus0 apid 5 (I/O APIC)
ioapic3: pa 0xfec03000, version 11, 16 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 32-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not
configured PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not
configured PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0A06 [Generic Container Device] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
ACPI Object Type 'Thermal' (0x0d) at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1166 product 0x0014 (rev. 0x33)
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1166 product 0x0014 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1166 product 0x0014 (rev. 0x00)
vga1 at pci0 dev 3 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
vendor 0x0e11 product 0xb203 (miscellaneous system, revision 0x01) at
pci0 dev 4 function 0 not configured vendor 0x0e11 product 0xb204
(miscellaneous system, revision 0x01) at pci0 dev 4 function 2 not
configured pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x1166 product 0x0201 (rev. 0x93)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks CSB5 IDE Controller (rev. 0x93)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: vendor 0x1166 product 0x0220 (rev. 0x05)
ohci0: interrupting at ioapic0 pin 7 (irq 7)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb3 at pci0 dev 15 function 3
pchb3: vendor 0x1166 product 0x0225 (rev. 0x00)
pchb4 at pci0 dev 16 function 0
pchb4: vendor 0x1166 product 0x0101 (rev. 0x05)
pci1 at pchb4 bus 3
pci1: i/o space, memory space enabled
wm0 at pci1 dev 1 function 0: Intel i82545GM 1000BASE-X Ethernet, rev. 4
wm0: interrupting at ioapic1 pin 4 (irq 15)
wm0: Ethernet address 00:04:23:9f:5b:59
wm0: 1000baseSX, 1000baseSX-FDX, auto
pchb5 at pci0 dev 16 function 2
pchb5: vendor 0x1166 product 0x0101 (rev. 0x05)
pci2 at pchb5 bus 6
pci2: i/o space, memory space enabled
vendor 0x0e11 product 0xa0f7 (PCI Hot-Plug system, revision 0x14) at pci2
dev 30 function 0 not configured pchb6 at pci0 dev 17 function 0
pchb6: vendor 0x1166 product 0x0101 (rev. 0x05)
pci3 at pchb6 bus 1
pci3: i/o space, memory space enabled
ciss0 at pci3 dev 3 function 0: Compaq Smart Array 5i
ciss0: interrupting at ioapic1 pin 14 (irq 10)
ciss0: 2 LDs, HW rev 1, FW 2.56/2.56
scsibus0 at ciss0: 2 targets, 8 luns per target
pchb7 at pci0 dev 17 function 2
pchb7: vendor 0x1166 product 0x0101 (rev. 0x05)
pci4 at pchb7 bus 2
pci4: i/o space, memory space enabled
bge0 at pci4 dev 1 function 0: Broadcom BCM5703X Gigabit Ethernet
bge0: interrupting at ioapic1 pin 13 (irq 11)
bge0: ASIC BCM5703 A2 (0x1002), Ethernet address 00:0e:7f:ae:5c:14
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto bge1 at pci4 dev 2 function 0: Broadcom BCM5703X
Gigabit Ethernet intr_establish: pic ioapic1 pin 15: can't share type 2
with 3
bge1: couldn't establish interrupt at ioapic1 pin 15 (irq 15)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
ioapic3: enabling
timecounter: Timecounter "TSC" frequency 3189533080 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
How-To-Repeat:
Just put in the NetBSD 4.0 RELEASE installation CD and to boot it.
Fix: