Re: agr issue in netbsd-7

[6bone%6bone.informatik.uni-leipzig.de@localhost]

On Wed, 19 Aug 2015, Havard Eidnes wrote:

> > In the meantime, perhaps someone of you could file a PR?
> > (so this doesn't get lost in the archives...)
>
> Done, PR#50155.
>
> Regards,
>
> - Håvard

Hello,

is there a possibility that the problem will be solved in the near future? 
The workaround described in the PR is not working correctly. If you set 
the link address with ifconfig, the lacp keeps using the hardware MAC 
address.

ifconfig bnx1
bnx1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        capabilities=3f00<IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx>
        capabilities=3f00<UDP4CSUM_Rx,UDP4CSUM_Tx>
        enabled=3f00<IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx>
        enabled=3f00<UDP4CSUM_Rx,UDP4CSUM_Tx>
        ec_capabilities=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
        ec_enabled=0
        address: 00:19:b9:b0:f1:43
        media: Ethernet autoselect (1000baseT full-duplex,master)
        status: active
        link 00:19:b9:b0:f1:45

the lacp information from the switch:

Partner's information:

                  LACP port                        Admin  Oper   Port 
Port
Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
Gi7/44    SA      32768     0019.b9b0.f145  13s    0x0    0xD0   0x1     0x3D
Gi7/46    SA      32768     0019.b9b0.f143  15s    0x0    0xD0   0x4     0xD

At Port Gi7/46 is still used the hardware MAC address.


Thank you for your efforts

Regards
Uwe