Current-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: What modern chipsets / motherboards are supported right now?



Here is a dmesg.boot from recent -current amd64 on an ASUS Z97WS, if that is of interest. I am building a live image right now to try booting from a SATA disk (this boot is from a live image on a USB stick attached to a USB2 port on the m/b header - it wouldn't work using the USB3 blue ports at the back). I couldn't start Xorg - nv driver complained the device was unknown (a NVidia  Quadro K620).
----
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.4 (GENERIC) #8: Tue Jan 27 01:09:32 GMT 2015
sysbuild@support6.delcam.local:/home/sysbuild/Sysbuild/amd64/obj/home/sysbuild/src/sys/arch/amd64/compile/GENERIC
total memory = 16324 MB
avail memory = 15832 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUS All Series (System Version)
mainbus0 (root)
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BDD3B080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000BDD4A740 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000BDD3B198 00F5A3 (v02 ALASKA A M I    00000011 INTL 20120711)
ACPI: FACS 0x00000000BE27BF80 000040
ACPI: APIC 0x00000000BDD4A850 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000BDD4A8E8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000BDD4A930 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BDD4B5B0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000BDD4BAF0 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
ACPI: MCFG 0x00000000BDD4C668 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x00000000BDD4C6A8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000BDD4C6E0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BDD4CA50 005977 (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
ACPI: DMAR 0x00000000BDD52420 000080 (v01 INTEL  BDW      00000001 INTL 00000001)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, id 0x306c3
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, id 0x306c3
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, id 0x306c3
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, id 0x306c3
cpu4 at mainbus0 apid 1
cpu4: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, id 0x306c3
cpu5 at mainbus0 apid 3
cpu5: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, id 0x306c3
cpu6 at mainbus0 apid 5
cpu6: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, id 0x306c3
cpu7 at mainbus0 apid 7
cpu7: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz, id 0x306c3
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20140926
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811D287010 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811D341810 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811D285AD0 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpiec1 at acpi0 (H_EC, PNP0C09-1): using acpiec0
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
LDR2 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 50.0C
acpitz0: active cooling level 3: 45.0C
acpitz0: active cooling level 4: 40.0C
acpitz0: levels: critical 105.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
acpitz1: levels: critical 105.0 C, passive 108.0 C, passive cooling
acpiwmi1 at acpi0 (AMW0, PNP0C14-ASUSWMI): ACPI WMI Interface
wmieeepc0 at acpiwmi1: Asus Eee PC WMI mappings
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-646)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c00 (rev. 0x06)
ppb0 at pci0 dev 1 function 0: vendor 8086 product 0c01 (rev. 0x06)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 10b5 product 8747 (rev. 0xca)
ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 8 function 0: vendor 10b5 product 8747 (rev. 0xca)
ppb2: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x16 @ 8.0GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci2 dev 16 function 0: vendor 10b5 product 8747 (rev. 0xca)
ppb3: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x16 @ 8.0GT/s
pci4 at ppb3 bus 3
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci4 dev 0 function 0: vendor 10de product 13bb (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci4 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: vendor 10de product 0060
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: DP01 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
vendor 8086 product 8cb1 (USB serial bus, xHCI) at pci0 dev 20 function 0 not configured
vendor 8086 product 8cba (miscellaneous communications) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: I218 LM Ethernet Connection (rev. 0x00)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address 54:a0:50:85:31:9d
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 5
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 8cad (rev. 0x00)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg1 at hdaudio1: vendor 10ec product 0900
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Built-In]
hdafg1: DIG03 2ch: SPDIF Out [Jack]
hdafg1: ADC04 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC05 2ch: Mic In [Jack]
hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
ppb4 at pci0 dev 28 function 0: vendor 8086 product 8c90 (rev. 0xd0)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 28 function 3: vendor 8086 product 8c96 (rev. 0xd0)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci6 dev 0 function 0: vendor 1b21 product 1187 (rev. 0x00)
ppb6: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci7 dev 1 function 0: vendor 1b21 product 1187 (rev. 0x00)
ppb7: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci7 dev 2 function 0: vendor 1b21 product 1187 (rev. 0x00)
ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci7 dev 3 function 0: vendor 1b21 product 1187 (rev. 0x00)
ppb9: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci10 dev 0 function 0: vendor 1b21 product 0612 (rev. 0x02)
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ppb10 at pci7 dev 4 function 0: vendor 1b21 product 1187 (rev. 0x00)
ppb10: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 5.0GT/s
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
ppb11 at pci7 dev 5 function 0: vendor 1b21 product 1187 (rev. 0x00)
ppb11: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
ppb12 at pci7 dev 6 function 0: vendor 1b21 product 1187 (rev. 0x00)
ppb12: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb12: link is x1 @ 2.5GT/s
pci13 at ppb12 bus 13
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci13 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)
wm1: interrupting at ioapic0 pin 17
wm1: PCI-Express bus
wm1: 2048 words FLASH(HW)
wm1: Ethernet address 54:a0:50:85:31:9e
wm1: Copper
ukphy0 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb13 at pci7 dev 7 function 0: vendor 1b21 product 1187 (rev. 0x00)
ppb13: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb13: link is x1 @ 2.5GT/s
pci14 at ppb13 bus 14
pci14: i/o space, memory space enabled, rd/line, wr/inv ok
fwohci0 at pci14 dev 0 function 0: vendor 1106 product 3403 (rev. 0x01)
fwohci0: interrupting at ioapic0 pin 18
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1e:8c:00:00:72:97:a4
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ppb14 at pci0 dev 28 function 4: vendor 8086 product 8c98 (rev. 0xd0)
ppb14: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s
ppb14: link is x1 @ 5.0GT/s
pci15 at ppb14 bus 15
pci15: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata1 at pci15 dev 0 function 0: vendor 1b21 product 0612 (rev. 0x02)
ahcisata1: interrupting at ioapic0 pin 16
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xeb32ff81<CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
atabus2 at ahcisata1 channel 0
atabus3 at ahcisata1 channel 1
ppb15 at pci0 dev 28 function 6: vendor 8086 product 8c9c (rev. 0xd0)
ppb15: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci16 at ppb15 bus 16
pci16: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1b21 product 1142 (USB serial bus, xHCI) at pci16 dev 0 function 0 not configured
ehci1 at pci0 dev 29 function 0: vendor 8086 product 8ca6 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 8cc4 (rev. 0x00)
ahcisata2 at pci0 dev 31 function 2: vendor 8086 product 8c82 (rev. 0x00)
ahcisata2: interrupting at ioapic0 pin 19
ahcisata2: 64-bit DMA
ahcisata2: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
atabus4 at ahcisata2 channel 0
atabus5 at ahcisata2 channel 2
atabus6 at ahcisata2 channel 3
vendor 8086 product 8ca2 (SMBus serial bus) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat 148 us, pow   200 mW
acpicpu0: P0: FFH, lat  10 us, pow 88000 mW, 4001 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 88000 mW, 4000 MHz
acpicpu0: P2: FFH, lat  10 us, pow 81704 mW, 3800 MHz
acpicpu0: P3: FFH, lat  10 us, pow 72258 mW, 3500 MHz
acpicpu0: P4: FFH, lat  10 us, pow 66530 mW, 3300 MHz
acpicpu0: P5: FFH, lat  10 us, pow 60999 mW, 3100 MHz
acpicpu0: P6: FFH, lat  10 us, pow 55687 mW, 2900 MHz
acpicpu0: P7: FFH, lat  10 us, pow 48456 mW, 2600 MHz
acpicpu0: P8: FFH, lat  10 us, pow 43627 mW, 2400 MHz
acpicpu0: P9: FFH, lat  10 us, pow 39003 mW, 2200 MHz
acpicpu0: P10: FFH, lat  10 us, pow 32072 mW, 1900 MHz
acpicpu0: P11: FFH, lat  10 us, pow 27930 mW, 1700 MHz
acpicpu0: P12: FFH, lat  10 us, pow 23963 mW, 1500 MHz
acpicpu0: P13: FFH, lat  10 us, pow 20178 mW, 1300 MHz
acpicpu0: P14: FFH, lat  10 us, pow 15137 mW, 1000 MHz
acpicpu0: P15: FFH, lat  10 us, pow 11779 mW,  800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 4000240880 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata2 port 0: device present, speed: 6.0Gb/s
ahcisata2 port 3: device present, speed: 1.5Gb/s
wd0 at atabus4 drive 0
wd0: <SSD2SC240GC2DH16T-T>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
wd0: GPT GUID: 8c36c32f-b8b2-4423-8672-c47b02eedff9
dk0 at wd0: Basic data partition
dk0: 614400 blocks at 2048, type: 
dk1 at wd0: EFI system partition
dk1: 204800 blocks at 616448, type: msdos
dk2 at wd0: Microsoft reserved partition
dk2: 262144 blocks at 821248, type: 
dk3 at wd0: 8eb2a69f-734c-47ff-af75-94d7b50ae94f
dk3: 437057536 blocks at 1083392, type: 
wd0: wedge named '8eb2a69f-734c-47ff-af75-94d7b50ae94f' already existed, using '8eb2a69f-734c-47ff-af75-94d7b50ae94f'
dk4 at wd0: dbd2f190-e090-43cf-ac10-27c3929ce2df
dk4: 30720000 blocks at 438140928, type: 
wd0: wedge named 'dbd2f190-e090-43cf-ac10-27c3929ce2df' already existed, using 'dbd2f190-e090-43cf-ac10-27c3929ce2df'
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus6: 1 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW SH-224DB, R93E6YAF700R2A, SB01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata2:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub1 port 1: vendor 8087 product 8001, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 8087 product 8009, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
uhub4 at uhub2 port 2: ASUS Tek. ASM107x, class 9/0, rev 2.00/1.00, addr 3
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Microsoft MicrosoftM-BM-. Digital Media Keyboard, rev 2.00/1.43, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: Microsoft MicrosoftM-BM-. Digital Media Keyboard, rev 2.00/1.43, addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhidev2 at uhub2 port 4 configuration 1 interface 0
uhidev2: Logitech USB Optical Mouse, rev 2.00/72.00, addr 4, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.10, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, PMAP> disk removable
sd0: 3832 MB, 15328 cyl, 16 head, 32 sec, 512 bytes/sect x 7847936 sectors
umass1 at uhub3 port 4 configuration 1 interface 0
umass1: Generic USB Storage, rev 2.00/94.51, addr 5
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <Generic, STORAGE DEVICE, 9451> disk removable
sd1: drive offline
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.4/modules
WARNING: clock gained 14 days
---------------------------


Chavdar Ivanov


On Wed Feb 11 2015 at 4:07:13 PM Johan Ihrén <johani%johani.org@localhost> wrote:
I rather urgently need to build a new semi-portable server and as usual (as I don't do this all the time) the selection of motherboards, CPUs, etc, at the various suppliers is completely different from last time.

I've been here before and I know to hunt for supported NICs, etc, and that's usually less of a concern to me, as it is always possible to add an extra NIC if needed.

But chipsets is a different story. I see (in the Intel space) things like Q87, H97 and Z97 together with DDR3 memory. Are any / all / some of those supported in 6.1.X? In -current? Where do I find that out?

Assuming NetBSD supports it my current plan is an i7-4790K + ASUS Z97M-PLUS.

Regards,

Johan



Home | Main Index | Thread Index | Old Index