Re: HEAD on intel graphics

[Jose Luis Rodriguez Garcia <joseyluis%gmail.com@localhost>]

I have tried HEAD compiled from sources of 11 of April with userland
of BETA 7 from December

This is the result:

1- No more artifacts using AccelMode.

2- If I use AccelMode the X server hangs after of serveral minutes/hours.

3- I don't need the ModeLine parameter anymore for configure the
resolution in my Monitor.

4- It continues detect a unexistent output in my computer: LVDS1. My
computer has only VGA1 output.

5- The computer is Shuttle XS35V2 with integrated Intel Graphics Card
(it is a Atom 525 Dual Core with Intel GMA 3150 Graphic engine).

This is the output of dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.9 (GENERIC) #2: Sat Apr 11 22:40:42 CEST 2015
    root@pc2:/root/sources.201503072110/src/sys/arch/amd64/compile/obj/GENERIC
total memory = 4086 MB
avail memory = 3949 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Standard XS35 (To Be Filled By O.E.M.)
mainbus0 (root)
ACPI: RSDP 0x00000000000F9ED0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000BF6B0100 00005C (v01 Shuttl Shuttle  20110321
MSFT 00000097)
ACPI: FACP 0x00000000BF6B0290 0000F4 (v04 032111 FACP1608 20110321
MSFT 00000097)
ACPI: DSDT 0x00000000BF6B05C0 006645 (v02 XS35V  XS35V10  00000200
INTL 20051117)
ACPI: FACS 0x00000000BF6BE000 000040
ACPI: APIC 0x00000000BF6B0390 00006C (v02 032111 APIC1608 20110321
MSFT 00000097)
ACPI: MCFG 0x00000000BF6B0400 00003C (v01 032111 OEMMCFG  20110321
MSFT 00000097)
ACPI: SLIC 0x00000000BF6B0440 000176 (v01 Shuttl Shuttle  20110321
MSFT 00000097)
ACPI: OEMB 0x00000000BF6BE040 000072 (v01 032111 OEMB1608 20110321
MSFT 00000097)
ACPI: HPET 0x00000000BF6BA5C0 000038 (v01 032111 OEMHPET  20110321
MSFT 00000097)
ACPI: GSCI 0x00000000BF6BE0C0 002024 (v01 032111 GMCHSCI  20110321
MSFT 00000097)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Atom(TM) CPU D525   @ 1.80GHz, id 0x106ca
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Atom(TM) CPU D525   @ 1.80GHz, id 0x106ca
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Atom(TM) CPU D525   @ 1.80GHz, id 0x106ca
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Atom(TM) CPU D525   @ 1.80GHz, id 0x106ca
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20140926
acpi0: X/RSDT: OemId <Shuttl,Shuttle ,20110321>, AslId <MSFT,00000097>
ACPI Error: No handler for Region [ECRM] (0xfffffe813ecf3e08)
[EmbeddedControl] (20140926/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140926/exfldio-322)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_._REG]
(Node 0xfffffe813eceabd0), AE_NOT_EXIST (20140926/psparse-552)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0410): ACPI Display Output Device
acpiout1: brightness levels: [0-7]
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0,
head 0, bios detect
acpivga0:   0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port
1, head 0, bios detect
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
RMEM (PNP0C01) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AMW0, PNP0C14-1): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 104.0 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20140926/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20140926/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product a000 (rev. 0x02)
agp0 at pchb0: i915-family chipset
agp0: detected 7932k stolen memory
agp0: BAR size 100000 mismatches detected GTT size 40000; trusting BAR
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product a001 (rev. 0x02)
drm: Memory usable by graphics device = 1024M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: initialized overlay support
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800048e16000, size 1920x1080, depth 32,
stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation),
using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product a002 (miscellaneous display, revision 0x02) at
pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: vendor 111d product 7605
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root
Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root
Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 197b product 2382 (miscellaneous system, revision 0x80) at pci2
dev 0 function 0 not configured
sdhc0 at pci2 dev 0 function 2: vendor 197b product 2381 (rev. 0x80)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SD Host Specification 2.0, rev.176
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
vendor 197b product 2383 (miscellaneous system, revision 0x80) at pci2
dev 0 function 3 not configured
jme0 at pci2 dev 0 function 5
jme0: JMicron JMC250 Gigabit Ethernet Controller
jme0: PCI device revision : 0x3, Chip revision: 0x23
jme0: Ethernet address 80:ee:73:13:66:4f
jme0: interrupting at ioapic0 pin 17
ukphy0 at jme0 phy 1: OUI 0x00d831, model 0x0021, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 3: vendor 8086 product 27d6 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root
Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 10ec product 8176 (miscellaneous network, revision 0x01) at
pci3 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xe2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27bc (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid
Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb4: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
uhub3 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb3: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
ehci0: handing over low speed device on port 4 to uhci1
ehci0: handing over low speed device on port 5 to uhci2
ehci0: handing over low speed device on port 6 to uhci2
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Padix Co. Ltd. USB, 3-axis, 4-button joystick, rev 1.01/1.00,
addr 2, iclass 3/0
uhid0 at uhidev0: input=6, output=0, feature=0
uhidev1 at uhub1 port 1 configuration 1 interface 0
uhidev1: Semi Tech Semi Tech PS/2 Keyboard - PS/2 Mouse, rev
1.01/0.01, addr 2, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wd0 at atabus0 drive 0
wd0: <SAMSUNG HN-M101MBB>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub1 port 1 configuration 1 interface 1
uhidev2: Semi Tech Semi Tech PS/2 Keyboard - PS/2 Mouse, rev
1.01/0.01, addr 2, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhidev3 at uhub1 port 2 configuration 1 interface 0
uhidev3: vendor 1bcf USB Optical Mouse, rev 2.00/0.14, addr 3, iclass 3/1
uhidev3: 1 report ids
ums1 at uhidev3 reportid 1: 5 buttons, W and Z dirs
wsmouse1 at ums1 mux 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVDRAM GT32N, KZ7B2I13217, 1.00>
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.9/modules
tap0: Ethernet address f2:0b:a4:96:d2:8a
tap1: Ethernet address f2:0b:a4:bb:1b:30
tap2: Ethernet address f2:0b:a4:94:44:76
tap5: Ethernet address f2:0b:a4:b4:2c:28
tap6: Ethernet address f2:0b:a4:a6:8b:d0
tap7: Ethernet address f2:0b:a4:e9:dc:aa
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
set{u,g}id pid 1750 (gnome-pty-helper) was invoked by uid 1004 ppid
2901 (Terminal) with fd 2 closed
set{u,g}id pid 2965 (gnome-pty-helper) was invoked by uid 1004 ppid
2992 (Terminal) with fd 2 closed
set{u,g}id pid 468 (gnome-pty-helper) was invoked by uid 1004 ppid
3180 (Terminal) with fd 2 closed
set{u,g}id pid 2707 (gnome-pty-helper) was invoked by uid 1004 ppid
1251 (Terminal) with fd 2 closed
ulpt0 at uhub2 port 8 configuration 1 interface 0
ulpt0: Kyocera Kyocera FS-1300D, rev 2.00/0.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ulpt0: detached
ulpt0: at uhub2 port 8 (addr 2) disconnected
ulpt0 at uhub2 port 8 configuration 1 interface 0
ulpt0: Kyocera Kyocera FS-1300D, rev 2.00/0.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ulpt0: detached
ulpt0: at uhub2 port 8 (addr 2) disconnected
ulpt0 at uhub2 port 8 configuration 1 interface 0
ulpt0: Kyocera Kyocera FS-1300D, rev 2.00/0.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ulpt0: detached
ulpt0: at uhub2 port 8 (addr 2) disconnected

On 6 April 2015 at 19:02, Manuel Bouyer
<bouyer%antioche.eu.org@localhost> wrote:
> Hello,
> I'm happy to report that with the latest HEAD fixes to drm2, I don't
> experience any display corruption on the i965GM that I used to see.
> This should definitively be pulled up to netbsd-7 !
>
> --
> Manuel Bouyer <bouyer%antioche.eu.org@localhost>
>      NetBSD: 26 ans d'experience feront toujours la difference
> --