tech-x11 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
xf86-video-intel query
Hi,
I'm trying to get X working with the xf86-video-intel driver on my new
Intel mini-ITX motherboard (Intel D410PT) on netbsd-5. What I've done so
far involves fiddling in sys/dev/pci to get the kernel to recognise the
IGD. See dmesg below.
xf86-video-vesa 2.3.0 works no problem. I then tried intel 2.9.1 which
doesn't officially support the Pineview device and X started up but all
I got was a blank screen. I can see from the monitor's own menu that it
had correctly set the resolution and remotely via a telnet session I
could query and alter the resolution with xrandr. Couldn't do anything
to cure the blackness though.
At this point I assumed the intel driver to be the problem so I updated
to intel 2.10.0 and now X wouldn't start at all. I assume the critical
error was the one about "No kernel modesetting driver detected."
Any pointers as to how I can get this working would be great.
Thanks,
Brad
See dmesg and Xorg.0.log when running Intel 2.10.0:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0_STABLE (GENERIC) #8: Thu Jan 21 17:43:36 SAST 2010
root%netbsd53.cat.co.za@localhost:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 495 MB
avail memory = 474 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
(
)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1662MHz, id 0x106ca
cpu1 at mainbus0 apid 1: Intel 686-class, 1662MHz, id 0x106ca
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <INTEL ,MOPNV10J,00000057>, AslId < ,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
npx1 at acpi0 (FPU, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0xa000 (rev. 0x00)
agp0 at pchb0: detected 7164k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0xa001 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: can't map device i/o space
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
10/100BaseTX
(rev. 0x02)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address 00:27:0e:00:f5:21
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: no spaces enabled!
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: no spaces enabled!
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x01)
pci4 at ppb3 bus 4
pci4: no spaces enabled!
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe1)
pci5 at ppb4 bus 5
pci5: no spaces enabled!
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x27bc (rev. 0x01)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 19 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0: <ST3500410SV>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using
DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: NetBSD-5.0-i386 The NetBSD Foundation
Current Operating System: NetBSD brad_net5 5.0_STABLE NetBSD 5.0_STABLE
(GENERIC
) #8: Thu Jan 21 17:43:36 SAST 2010
root%netbsd53.cat.co.za@localhost:/usr/src/sys/arch/i
386/compile/GENERIC i386
Build Date: 18 January 2010 12:08:20PM
Before reporting problems, check http://www.pkgsrc.org/
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 21 19:37:52 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "My Video Card"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/pkg/lib/X11/fonts/misc/,
/usr/pkg/lib/X11/fonts/TTF/,
/usr/pkg/lib/X11/fonts/Type1/,
/usr/pkg/lib/X11/fonts/100dpi/,
/usr/pkg/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/pkg/lib/xorg/modules"
(II) Loader magic: 0x1fea0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on netbsd
(--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode
(version 3.32)
(--) using VT number 5
(--) PCI:*(0:0:2:0) 8086:a001:8086:4f4d rev 0, Mem @ 0xe0200000/524288,
0xd00000
00/268435456, 0xe0100000/1048576, I/O @ 0x000020c0/8
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also
specified in
the config file.
(II) "dbe" will be loaded. This was enabled by default and also
specified in the
config file.
(II) "glx" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/pkg/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/pkg/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/pkg/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/pkg/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/pkg/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/pkg/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/pkg/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/pkg/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(EE) intel(0): No kernel modesetting driver detected.
(II) UnloadModule: "intel"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The NetBSD Foundation support
at http://www.pkgsrc.org/
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
informati
on.
Home |
Main Index |
Thread Index |
Old Index