Re: boot problems with bge(4)

[Christoph Egger <Christoph_Egger%gmx.de@localhost>]

On 03.06.11 17:55, SAITOH Masanobu wrote:
> Hi Christoph.
> 
> BCM5785 should not be PCIX chip. It's PCIe chip.
> 
> I suspect that your have some local patches for if_bge.c
> Could you mail it to me? Please.

Yes, I can do that on monday.

Christoph

> 
> Thanks.
> 
> (2011/06/03 21:58), Christoph Egger wrote:
>> On 06/03/11 14:18, Christoph Egger wrote:
>>>
>>> Hi,
>>>
>>>
>>> [...]
>>> bge0 at pci0 dev 20 function 6: Broadcom BCM5785G Gigabit Ethernet
>>> bge0: interrupting at ioapic1 pin 18, event channel 9
>>> bge0: unable to find PCIX capability
>>> bge0: firmware handshake timed out, val = 4b657654
>>> bge0: firmware handshake timed out, val = 4b657654
>>> bge0: ASIC unknown BCM5785 (0x5785041), Ethernet address
>>> 00:00:1a:1a:d8:ab
>>> brgphy0 at bge0 phy 1: BCM5785 1000BASE-T media interface, rev. 3
>>> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>>> 1000baseT-FD , auto
>>> [...]
>>>
>>> I have a local patch to attach brgphy on bge(4) rather ukphy(4) ...
>>>
>>>
>>> bge0: firmware handshake timed out, val = 4b657654
>>> bge0: firmware handshake timed out, val = 4b657654
>>> bge0: discarding oversize frame (len=-4)
>>> bge0: discarding oversize frame (len=-4)
>>> nfs_boot: trying DHCP/BOOTP
>>> bge0: watchdog timeout -- resetting
>>> bge0: firmware handshake timed out, val = 4b657654
>>> bge0: firmware handshake timed out, val = 4b657654
>>> bge0: discarding oversize frame (len=-4)
>>> bge0: discarding oversize frame (len=-4)
>>> nfs_boot: timeout...
>>> nfs_boot: timeout...
>>>
>>>
>>> The "discarding oversize frame" message comes from if_ethersubr.c
>>
>> I just figured out in bge_rxeof():
>>
>>      m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN;
>>
>> cur_rx->bge_len is 0.
>>
>> Christoph
> 
>