tech-net archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: wpa_supplicant and ral(4): RTM_IEEE80211: disassoc (102)



Forgot to mention:

Am 07.02.10 23:28, schrieb David Young:
I do not remember whether you use ral@cardbus, or whether ral uses
hardware crypto, but I have seen drivers do silly things like try to
read/write a crypto register while the Cardbus slot was powered down.
Usually it was harmless.


no.. this is a build-in card:

ral0 at pci2 dev 0 function 0: vendor 0x1814 product 0x0781 (rev. 0x00)
ral0: interrupting at ioapic0 pin 17
ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (1T2R)
ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps

Best regards,

  Torsten

--
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
<>                                                              <>
<> Dr. Torsten Harenberg     harenberg%physik.uni-wuppertal.de@localhost  <>
<> Bergische Universitaet                                       <>
<> FB C - Physik             Tel.: +49 (0)202 439-3521          <>
<> Gaussstr. 20              Fax : +49 (0)202 439-2811          <>
<> 42097 Wuppertal                                              <>
<>                                                              <>
<><><><><><><>< Of course it runs NetBSD http://www.netbsd.org ><>


Home | Main Index | Thread Index | Old Index