tech-net archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

RTL8169S/8110S not supported on 4.0_STABLE?



Hi all,

Originally I'd sent this to port-i386, but maybe someone here can help me.

I've got a Gigabyte motherboard with a Realtek onboard NIC and an ifconfig shows the MAC to be all zeros.

Relevant dmesg at boot:

/netbsd: re0 at pci2 dev 0 function 0pci_mem_find: void region
/netbsd: : RealTek 8168B/8111B PCIe Gigabit Ethernet (rev. 0x02)
/netbsd: re0: interrupting at ioapic0 pin 17 (irq 10)
/netbsd: re0: Unknown revision (0x3c000000)
/netbsd: re0: Ethernet address 00:00:00:00:00:00
/netbsd: re0: using 256 tx descriptors
/netbsd: rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 2 /netbsd: rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

and then later:

/netbsd: re0: PHY write reg 0 <- 8000 failed
/netbsd: re0: PHY write reg 1f <- 1 failed
/netbsd: re0: PHY write reg 9 <- 273a failed
/netbsd: re0: PHY write reg e <- 7bfb failed
/netbsd: re0: PHY write reg 1b <- 841e failed


It works with a cross-over CAT5 cable so it looks like it just may be the probing of the MAC address. Has anyone got a patch to fix this?


Many thanks,
Brad



Home | Main Index | Thread Index | Old Index