bug: 37723

[comfooc <comfooc%gmail.com@localhost>]

I'm forwarding my bug report here because was no response (till now)
at netbsd-bugs@
Cheers...

Subject: kern/37723: ne* AX88190 Fast Ethernet 16-bit PC Card: where
did the card go? problem
To: None <kern-bug-people%netbsd.org@localhost, 
gnats-admin%netbsd.org@localhost,>
From: None <comfooc%gmail.com@localhost>
List: netbsd-bugs
Date: 01/08/2008 18:55:00

>Number:         37723
>Category:       kern
>Synopsis:       ne* AX88190 Fast Ethernet 16-bit PC Card: where did
the card go?  problem
>Confidential:   no
>Severity:       non-critical
>Priority:       high
>Responsible:    kern-bug-people
>State:          open
>Class:          support
>Submitter-Id:   net
>Arrival-Date:   Tue Jan 08 18:55:00 +0000 2008
>Originator:     comfooc
>Release:        Current
>Organization:
>Environment:
NetBSD Netalia 4.99.45 NetBSD 4.99.45 (GENERIC) #0: Wed Dec 26
04:16:10 PST 2007
builds@wb30:/home/builds/ab/HEAD/i386/200712260002Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
i386

>Description:
Hi,
I have Micronet Fast Ethernet card and it doesn't work since 2.0
Release. 1.6 Release worked fine with it but latest releases don't.

This is my problem:

ne2 at pcmcia0 function 0: <Fast Ethernet, 16-bit PC Card, 3.0, AX88190>
ne2: where did the card go?

(under it is linux seen as AX88790)

My dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.45 (GENERIC) #0: Wed Dec 26 04:16:10 PST 2007
        
builds@wb30:/home/builds/ab/HEAD/i386/200712260002Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 319 MB
avail memory = 302 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xffe90
SMBIOS rev. 2.3 @ 0xf64d0 (58 entries)
Dell Computer Corporation Latitude CPx J750GT
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 747.73 MHz, id 0x686
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <DELL  , CPi R  ,27d00802>, AslId <ASL ,00000061>
mpacpi: could not get bus number, assuming bus 0
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 11
LNKD: ACPI: Found matching pin for 0.3.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.8.INTA at func 0: 5
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
MB1 (PNP0C01) [System Board] at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
MB2 (PNP0C01) [System Board] at acpi0 not configured
MB3 (PNP0C01) [System Board] at acpi0 not configured
MB5 (PNP0C01) [System Board] at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (KBC, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
MB4 (PNP0C01) [System Board] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
MAD (PNP0200) [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
ECP (PNP0401) [ECP printer port] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
PADA (ACPI Object Type 'Power' [0x0b]) at acpi0 not configured
acpitz0 at acpi0 (THM): critical 75.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf4000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Rage Mobility (rev. 0x64)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
cbb0 at pci0 dev 3 function 0: Texas Instruments PCI1225 PCI-CardBus
Bridge (rev. 0x01)
cbb1 at pci0 dev 3 function 1: Texas Instruments PCI1225 PCI-CardBus
Bridge (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB (PIIX4) USB Host
Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3
piixpm0: Intel 82371AB (PIIX4) Power Management Controller (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: interrupting at SMI
iic0 at piixpm0: I2C bus
esa0 at pci0 dev 8 function 0: ESS Technology Maestro 3 PCI Audio
Accelerator (rev. 0x10)
esa0: interrupting at irq 5
esa0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
esa0: ac97: ext id 200<AMAP>
audio0 at esa0: full duplex, mmap, independent
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5
pcmcia1 at cardslot1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpibat0: battery info: Sony Corp., LION, LIP868NLDLP 45284
ne2 at pcmcia0 function 0: <Fast Ethernet, 16-bit PC Card, 3.0, AX88190>
ne2: where did the card go?
wd0 at atabus0 drive 0: <FUJITSU MHT2060AH PL>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TEAC CD-ROM CD-224E, , 3.7C> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

Cheers...
>How-To-Repeat:
Buy Micronet Fast Ethernet card and try to use it under NetBSD 2.0+.
>Fix: