tech-kern archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Issues with intelfb(4) and USB keyboards
hello. I'm working to get a new installation of NetBSD-9.1 working on a Dell Optiplex 5050. This machine has an Intel HD graphics 530 video chip in
it with 2 Display ports, 1 HDMI port and 1 VGA port attached to it. I'm trying to get the VGA port working and I'm having trouble with that. When the
machine boots, the BIOS sets up the display as it should and the VGA port works. when the kernel takes over, it configures the intelfb(4) device and the screen
goes black and the monitor claims there's no signal. Dmesg is shown below, but it looks like either 1 of 2 things is happening:
1. The i915DRM driver is incorrectly assigning the video output to one of the displayporp jacks.
2. The i915DRM driver is unable to properly detect the supported clock rates on the VGA connected monitor and it's settting a resolution that's out of
range for the Monitor.
If it helps, I can log in without the screen on the console and I get a window of 64 lines X 160 characters.
That seems like a lot of text on a VGA screen.
I don't understand the significance or not of the dmesg output from the i915 driver, so I'm wondering if anyone might be able to help me track this issue
down?
-thanks
-Brian
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 9.1_STABLE (MIRKWOOD) #0: Wed Dec 16 23:49:40 PST 2020
[ 1.000000] buhrow%loth-9.nfbcal.org@localhost:/usr/local/netbsd/src-90/sys/arch/amd64/compile/MIRKWOOD
[ 1.000000] total memory = 16088 MB
[ 1.000000] avail memory = 15594 MB
[ 1.000000] WARNING: module error: module `msdos' pushed by boot loader already exists
[ 1.000000] cpu_rng: RDSEED
[ 1.000000] rnd: seeded with 256 bits
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000003] efi: systbl at pa dbd17018
[ 1.000003] Dell Inc. OptiPlex 5050
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x00000000D0ED9000 000024 (v02 DELL )
[ 1.000003] ACPI: XSDT 0x00000000D0ED90B8 0000F4 (v01 DELL CBX3 01072009 AMI 00010013)
[ 1.000003] ACPI: FACP 0x00000000D0F009F8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 1.000003] ACPI: DSDT 0x00000000D0ED9240 0277B4 (v02 DELL CBX3 01072009 INTL 20160422)
[ 1.000003] ACPI: FACS 0x00000000DB80DF00 000040
[ 1.000003] ACPI: APIC 0x00000000D0F00B08 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 1.000003] ACPI: FPDT 0x00000000D0F00B90 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 1.000003] ACPI: FIDT 0x00000000D0F00BD8 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 1.000003] ACPI: MCFG 0x00000000D0F00C88 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 1.000003] ACPI: HPET 0x00000000D0F00CC8 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 1.000003] ACPI: SSDT 0x00000000D0F00D00 003176 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 1.000003] ACPI: SSDT 0x00000000D0F03E78 0025A5 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 1.000003] ACPI: HPET 0x00000000D0F06420 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
[ 1.000003] ACPI: SSDT 0x00000000D0F06458 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 1.000003] ACPI: SSDT 0x00000000D0F07240 0008F6 (v02 INTEL DELL_SFF 00000000 INTL 20160422)
[ 1.000003] ACPI: UEFI 0x00000000D0F07B38 000042 (v01 00000000 00000000)
[ 1.000003] ACPI: SSDT 0x00000000D0F07B80 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 1.000003] ACPI: LPIT 0x00000000D0F08A60 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 1.000003] ACPI: SSDT 0x00000000D0F08AF8 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 1.000003] ACPI: SSDT 0x00000000D0F08C40 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 1.000003] ACPI: SSDT 0x00000000D0F08EE0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 1.000003] ACPI: SSDT 0x00000000D0F0BEE8 00050D (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 1.000003] ACPI: DBGP 0x00000000D0F0C3F8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 1.000003] ACPI: DBG2 0x00000000D0F0C430 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 1.000003] ACPI: MSDM 0x00000000D0F0C488 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 1.000003] ACPI: SLIC 0x00000000D0F0C4E0 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 1.000003] ACPI: TCPA 0x00000000D0F0C658 000032 (v02 ALASKA NAPAASF 00000000 MSFT 01000013)
[ 1.000003] ACPI: ASF! 0x00000000D0F0C690 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 1.000003] ACPI: BGRT 0x00000000D0F0C730 000038 (v00 ?? 01072009 AMI 00010013)
[ 1.000003] ACPI: DMAR 0x00000000D0F0C768 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 1.000003] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 1.000003] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
[ 1.000003] cpu0 at mainbus0 apid 0
[ 1.000003] cpu0: CPU base freq 3200000000 Hz
[ 1.000003] cpu0: CPU max freq 3600000000 Hz
[ 1.000003] cpu0: TSC freq CPUID 3192000000 Hz
[ 1.000003] cpu0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
[ 1.000003] cpu0: package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 2
[ 1.000003] cpu1: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
[ 1.000003] cpu1: package 0, core 1, smt 0
[ 1.000003] cpu2 at mainbus0 apid 4
[ 1.000003] cpu2: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
[ 1.000003] cpu2: package 0, core 2, smt 0
[ 1.000003] cpu3 at mainbus0 apid 6
[ 1.000003] cpu3: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
[ 1.000003] cpu3: package 0, core 3, smt 0
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[ 1.000003] acpi0: X/RSDT: OemId <DELL , CBX3 ,01072009>, AslId <AMI ,00010013>
[ 1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFEDBA6E995808 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFEDB7719DF008 0006D5 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFEDB7719DF808 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFEDBA6E9B8AC8 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
[ 1.007707] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.007707] timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
[ 1.008080] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
[ 1.008080] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.008080] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
[ 1.008080] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
[ 1.008080] acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
[ 1.008080] acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
[ 1.008080] acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
[ 1.008080] acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
[ 1.008080] acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
[ 1.008080] acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
[ 1.008080] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
[ 1.008080] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
[ 1.008080] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
[ 1.008080] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
[ 1.008080] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
[ 1.008080] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
[ 1.008080] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
[ 1.008080] acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
[ 1.008080] acpiout15: brightness levels: [0-100]
[ 1.008080] acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
[ 1.008080] acpivga0: connected output devices:
[ 1.008080] acpivga0: 0x0400 (acpiout15): Unknown Output Device, head 0
[ 1.008080] SIO1 (PNP0C02) at acpi0 not configured
[ 1.008080] UAR1 (PNP0501) at acpi0 not configured
[ 1.008080] pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1
[ 1.008080] pckbc2 at acpi0 (PS2M, PNP0F03-0) (aux port): io 0x60,0x64 irq 12
[ 1.008080] FWHD (INT0800) at acpi0 not configured
[ 1.008080] LDRC (PNP0C02) at acpi0 not configured
[ 1.008080] LDR2 (PNP0C02) at acpi0 not configured
[ 1.008080] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
[ 1.008080] CWDT (INT3F0D) at acpi0 not configured
[ 1.008080] PDRC (PNP0C02) at acpi0 not configured
[ 1.008080] IOTR (PNP0C02) at acpi0 not configured
[ 1.008080] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.008080] PEPD (INT33A1) at acpi0 not configured
[ 1.008080] acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.008080] TPM (PNP0C31) at acpi0 not configured
[ 1.008080] acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
[ 1.008080] wmidell0 at acpiwmi0: Dell WMI mappings version 1
[ 1.008080] PTID (INT340E) at acpi0 not configured
[ 1.008080] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[ 1.008080] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
[ 1.008080] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
[ 1.008080] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
[ 1.008080] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
[ 1.008080] acpitz0 at acpi0 (TZ00)
[ 1.008080] acpitz0: active cooling level 0: 71.0C
[ 1.008080] acpitz0: active cooling level 1: 55.0C
[ 1.008080] acpitz0: active cooling level 2: 50.0C
[ 1.008080] acpitz0: active cooling level 3: 45.0C
[ 1.008080] acpitz0: active cooling level 4: 40.0C
[ 1.008080] acpitz0: levels: critical 119.0 C
[ 1.008080] acpitz1 at acpi0 (TZ01)
[ 1.008080] acpitz1: levels: critical 119.0 C, passive cooling
[ 1.008080] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 1.008080] pckbd0 at pckbc1 (kbd slot)
[ 1.008080] pckbc1: using irq 1 for kbd slot
[ 1.008080] wskbd0 at pckbd0: console keyboard
[ 1.008080] pms0 at pckbc1 (aux slot)
[ 1.008080] pckbc1: using irq 12 for aux slot
[ 1.008080] wsmouse0 at pms0 mux 0
[ 1.008080] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.008080] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.008080] pchb0 at pci0 dev 0 function 0: vendor 8086 product 191f (rev. 0x07)
[ 1.008080] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 1912 (rev. 0x06)
[ 1.008080] xhci0 at pci0 dev 20 function 0: vendor 8086 product a2af (rev. 0x00)
[ 1.008080] xhci0: interrupting at msi0 vec 0
[ 1.008080] xhci0: xHCI version 1.0
[ 1.008080] usb0 at xhci0: USB revision 3.0
[ 1.008080] usb1 at xhci0: USB revision 2.0
[ 1.008080] vendor 8086 product a2b1 (miscellaneous DASP) at pci0 dev 20 function 2 not configured
[ 1.008080] vendor 8086 product a2ba (miscellaneous communications) at pci0 dev 22 function 0 not configured
[ 1.008080] puc0 at pci0 dev 22 function 3: Intel 200 Series KT (com)
[ 1.008080] com2 at puc0 port 0 (16550-compatible): ioaddr 0xf0a0, interrupting at ioapic0 pin 20
[ 1.008080] com2: ns16550a, working fifo
[ 1.008080] ahcisata0 at pci0 dev 23 function 0: vendor 8086 product a282 (rev. 0x00)
[ 1.008080] ahcisata0: 64-bit DMA
[ 1.008080] ahcisata0: AHCI revision 1.31, 4 ports, 32 slots, CAP 0xe734ff43<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
[ 1.008080] ahcisata0: interrupting at msi1 vec 0
[ 1.008080] atabus0 at ahcisata0 channel 0
[ 1.008080] atabus1 at ahcisata0 channel 1
[ 1.008080] atabus2 at ahcisata0 channel 2
[ 1.008080] pcib0 at pci0 dev 31 function 0: vendor 8086 product a2c6 (rev. 0x00)
[ 1.008080] vendor 8086 product a2a1 (miscellaneous memory) at pci0 dev 31 function 2 not configured
[ 1.008080] hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
[ 1.008080] hdaudio0: interrupting at msi2 vec 0
[ 1.008080] hdafg0 at hdaudio0: Realtek ALC3234
[ 1.008080] hdafg0: DAC00 2ch: Speaker [Jack]
[ 1.008080] hdafg0: 2ch/0ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[ 1.008080] audio0 at hdafg0: playback, capture, full duplex, independent
[ 1.008080] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.008080] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.008080] spkr0 at audio0: PC Speaker (synthesized)
[ 1.008080] wsbell at spkr0 not configured
[ 1.008080] hdafg1 at hdaudio0: Intel product 2809
[ 1.008080] hdafg1: DP00 8ch: Digital Out [Jack]
[ 1.008080] hdafg1: 8ch/0ch 48000Hz PCM16*
[ 1.008080] ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a2a3 (rev. 0x00)
[ 1.008080] ichsmb0: interrupting at ioapic0 pin 23
[ 1.008080] iic0 at ichsmb0: I2C bus
[ 1.008080] spdmem0 at iic0 addr 0x51: 8ATF1G64AZ-2G3E1
[ 1.008080] spdmem0: DDR4 SDRAM (DDR4 UDIMM), no ECC, no temp-sensor, 8GB, 2401MHz (PC4-19200)
[ 1.008080] spdmem0: 16 rows, 10 cols, 1 ranks, 4 banks/group, 4 bank groups
[ 1.008080] spdmem0: 0.833ns cycle time
[ 1.008080] spdmem0: tAA-tRCD-tRP-tRAS: 17-17-17-39
[ 1.008080] spdmem1 at iic0 addr 0x53: CT8G4DFD8213.C16FHP
[ 1.008080] spdmem1: DDR4 SDRAM (DDR4 UDIMM), no ECC, no temp-sensor, 8GB, 2134MHz (PC4-17100)
[ 1.008080] spdmem1: 15 rows, 10 cols, 2 ranks (symmetric), 4 banks/group, 4 bank groups
[ 1.008080] spdmem1: 0.937ns cycle time
[ 1.008080] spdmem1: tAA-tRCD-tRP-tRAS: 15-15-15-36
[ 1.008080] wm0 at pci0 dev 31 function 6: I219 V Ethernet Connection (rev. 0x00)
[ 1.008080] wm0: interrupting at msi3 vec 0
[ 1.008080] wm0: PCI-Express bus
[ 1.008080] wm0: 4096 words FLASH, version 0.1.4
[ 1.008080] wm0: Ethernet address d8:9e:f3:4a:f9:f2
[ 1.008080] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
[ 1.008080] ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
[ 1.008080] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.008080] isa0 at pcib0
[ 1.008080] tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x00fe1050 rev 0x4
[ 1.008080] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[ 1.008080] pcppi0 at isa0 port 0x61
[ 1.008080] spkr1 at pcppi0: PC Speaker
[ 1.008080] wsbell at spkr1 not configured
[ 1.008080] midi0 at pcppi0: PC speaker
[ 1.008080] sysbeep0 at pcppi0
[ 1.008080] attimer1: attached to pcppi0
[ 1.008080] acpicpu0 at cpu0: ACPI CPU
[ 1.008080] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.008080] acpicpu0: C2: FFH, lat 151 us, pow 200 mW
[ 1.008080] acpicpu0: C3: FFH, lat 256 us, pow 200 mW
[ 1.008080] acpicpu0: P0: FFH, lat 10 us, pow 65000 mW, 3201 MHz, turbo boost
[ 1.008080] acpicpu0: P1: FFH, lat 10 us, pow 65000 mW, 3200 MHz
[ 1.008080] acpicpu0: P2: FFH, lat 10 us, pow 59079 mW, 3000 MHz
[ 1.008080] acpicpu0: P3: FFH, lat 10 us, pow 56516 mW, 2900 MHz
[ 1.008080] acpicpu0: P4: FFH, lat 10 us, pow 51532 mW, 2700 MHz
[ 1.008080] acpicpu0: P5: FFH, lat 10 us, pow 46744 mW, 2500 MHz
[ 1.008080] acpicpu0: P6: FFH, lat 10 us, pow 41545 mW, 2300 MHz
[ 1.008080] acpicpu0: P7: FFH, lat 10 us, pow 39313 mW, 2200 MHz
[ 1.008080] acpicpu0: P8: FFH, lat 10 us, pow 34990 mW, 2000 MHz
[ 1.008080] acpicpu0: P9: FFH, lat 10 us, pow 30835 mW, 1800 MHz
[ 1.008080] acpicpu0: P10: FFH, lat 10 us, pow 28823 mW, 1700 MHz
[ 1.008080] acpicpu0: P11: FFH, lat 10 us, pow 24402 mW, 1500 MHz
[ 1.008080] acpicpu0: P12: FFH, lat 10 us, pow 20687 mW, 1300 MHz
[ 1.008080] acpicpu0: P13: FFH, lat 10 us, pow 17137 mW, 1100 MHz
[ 1.008080] acpicpu0: P14: FFH, lat 10 us, pow 15427 mW, 1000 MHz
[ 1.008080] acpicpu0: P15: FFH, lat 10 us, pow 12119 mW, 800 MHz
[ 1.008080] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[ 1.008080] acpicpu1 at cpu1: ACPI CPU
[ 1.008080] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
[ 1.008080] acpicpu2 at cpu2: ACPI CPU
[ 1.008080] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
[ 1.008080] acpicpu3 at cpu3: ACPI CPU
[ 1.008080] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
[ 1.008080] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.008080] cpu1: CPU base freq 3200000000 Hz
[ 1.008080] cpu1: CPU max freq 3600000000 Hz
[ 1.008080] cpu1: TSC freq CPUID 3192000000 Hz
[ 1.008080] cpu2: CPU base freq 3200000000 Hz
[ 1.008080] cpu2: CPU max freq 3600000000 Hz
[ 1.008080] cpu2: TSC freq CPUID 3192000000 Hz
[ 1.008080] cpu3: CPU base freq 3200000000 Hz
[ 1.008080] cpu3: CPU max freq 3600000000 Hz
[ 1.008080] cpu3: TSC freq CPUID 3192000000 Hz
[ 1.008080] timecounter: Timecounter "TSC" frequency 3192000000 Hz quality 3000
[ 1.328603] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.328603] uhub0: 10 ports with 10 removable, self powered
[ 1.328603] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.328603] uhub1: 16 ports with 16 removable, self powered
[ 1.328603] IPsec: Initialized Security Association Processing.
[ 1.328603] nvmm0: attached, using backend x86-vmx
[ 1.424808] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 2.414808] ahcisata0 port 2: PHY offline
[ 2.424809] ahcisata0 port 1: PHY offline
[ 2.944810] uaudio0 at uhub1 port 3 configuration 1 interface 0
[ 2.964808] uaudio0: C-Media Electronics Inc. (0xd8c) C-Media USB Headphone Set (0x0c), rev 1.10/1.00, addr 1
[ 2.994808] wd0 at atabus0 drive 0
[ 3.014808] wd0: <2.5INCH SATA 512GB SSD>
[ 3.024808] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[ 3.024808] wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x 1000215216 sectors
[ 3.044808] uaudio0: audio rev 1.00
[ 3.044808] audio1 at uaudio0: playback, capture, full duplex, independent
[ 3.044808] audio1: slinear_le:16 2ch 48000Hz, blk 11520 bytes (60ms) for playback
[ 3.044808] audio1: slinear_le:16 1ch 48000Hz, blk 5760 bytes (60ms) for recording
[ 3.044808] spkr2 at audio1: PC Speaker (synthesized)
[ 3.044808] wsbell at spkr2 not configured
[ 3.044808] uhidev0 at uhub1 port 3 configuration 1 interface 3
[ 3.044808] uhidev0: C-Media Electronics Inc. (0xd8c) C-Media USB Headphone Set (0x0c), rev 1.10/1.00, addr 1, iclass 3/0
[ 3.044808] uhid0 at uhidev0: input=4, output=4, feature=0
[ 3.044808] wd0: GPT GUID: f9d9728a-5a6e-4165-9a8d-a10fe091cfaa
[ 3.054809] dk0 at wd0: "boot", 204800 blocks at 36, type: msdos
[ 3.054809] dk1 at wd0: "swap", 2016000 blocks at 204836, type: swap
[ 3.054809] dk2 at wd0: "root", 997994344 blocks at 2220836, type: ffs
[ 3.054809] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 3.064810] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.954810] uhub2 at uhub1 port 4: API (0x4a5) API USB KB HUB (0x9213), class 9/0, rev 1.00/1.01, addr 2
[ 3.954810] uhub2: 3 ports with 2 removable, bus powered
[ 4.894810] uhidev1 at uhub2 port 1 configuration 1 interface 0
[ 4.894810] uhidev1: API (0x4a5) API USB KB HUB (0x01), rev 1.00/1.01, addr 3, iclass 3/1
[ 4.894810] ukbd0 at uhidev1
[ 5.304810] wskbd1 at ukbd0 mux 1
[ 5.954810] uhidev2 at uhub2 port 2 configuration 1 interface 0
[ 5.954810] uhidev2: vendor 049c (0x49c) product 0002 (0x02), rev 1.00/0.00, addr 4, iclass 3/0
[ 5.954810] uhidev2: 4 report ids
[ 5.964808] uhid1 at uhidev2 reportid 1: input=1, output=0, feature=0
[ 5.964808] uhid2 at uhidev2 reportid 2: input=1, output=1, feature=0
[ 5.964808] uhid3 at uhidev2 reportid 3: input=1, output=1, feature=0
[ 5.964808] uhid4 at uhidev2 reportid 4: input=1, output=1, feature=0
[ 6.874810] umass0 at uhub1 port 8 configuration 1 interface 0
[ 6.874810] umass0: Apple (0x5ac) iPod (0x1301), rev 2.00/1.00, addr 5
[ 6.874810] umass0: using SCSI over Bulk-Only
[ 6.874810] scsibus0 at umass0: 2 targets, 1 lun per target
[ 6.874810] sd0 at scsibus0 target 0 lun 0: <Apple, iPod, 2.70> disk removable
[ 6.894808] sd0: 968 MB, 30 cyl, 255 head, 63 sec, 2048 bytes/sect x 495616 sectors
[ 7.094810] boot device: wd0
[ 7.104808] root on dk2 dumps on dk1
[ 7.114808] root file system type: ffs
[ 7.114808] kern.module.path=/stand/amd64/9.1/modules
[ 7.114808] warning: ../../../../external/bsd/drm2/dist/drm/i915/i915_drv.c:591: WARN_ON(!IS_KABYLAKE(dev_priv))kern info: [drm] Memory usable by graphics device = 4096M
[ 7.119049] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.119049] kern info: [drm] Driver supports precise vblank timestamp query.
[ 7.119049] kern info: [drm] failed to find VBIOS tables
[ 7.119049] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[ 7.124810] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/i915_drv.c:636)i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (0)
[ 7.124810] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/i915_drv.c:651)i915_firmware_load_error_print] *ERROR* The driver is built-in, so to load the firmware you need to
[ 7.124810] include it either in the kernel (see CONFIG_EXTRA_FIRMWARE) or
[ 7.124810] in your initrd/initramfs image.
[ 7.134810] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/drm_irq.c:810)drm_calc_timestamping_constants] *ERROR* crtc 21: Can't calculate constants, dotclock = 0!
[ 7.134810] warning: ../../../../external/bsd/drm2/dist/drm/i915/intel_pm.c:3276: WARN_ON(p->pixel_rate == 0)kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_guc_loader.c:560)guc_fw_fetch] *ERROR* Failed to fetch GuC firmware from i915/skl_guc_ver4.bin (error -2)
[ 7.134810] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/i915_gem.c:5417)i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -5 (ignored)
[ 7.144810] intelfb0 at i915drmkms0
[ 7.144810] intelfb0: framebuffer at 0xffff848139e34000, size 1280x1024, depth 32, stride 5120
[ 7.964808] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_dp.c:3797)intel_dp_link_training_clock_recovery] *ERROR* too many full retries, give up
[ 8.004808] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_dp.c:3797)intel_dp_link_training_clock_recovery] *ERROR* too many full retries, give up
[ 8.034810] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_dp.c:3797)intel_dp_link_training_clock_recovery] *ERROR* too many full retries, give up
[ 8.074812] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_dp.c:3797)intel_dp_link_training_clock_recovery] *ERROR* too many full retries, give up
[ 8.114810] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_dp.c:3797)intel_dp_link_training_clock_recovery] *ERROR* too many full retries, give up
[ 8.134808] kern info: [drm] RC6 on
[ 8.154810] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_dp.c:3797)intel_dp_link_training_clock_recovery] *ERROR* too many full retries, give up
[ 8.224808] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_dp.c:3797)intel_dp_link_training_clock_recovery] *ERROR* too many full retries, give up
[ 8.224808] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/intel_dp.c:3868)intel_dp_link_training_channel_equalization] *ERROR* failed to train DP, aborting
[ 8.254809] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[ 8.265725] wsmux1: connecting to wsdisplay0
[ 8.265725] wskbd1: connecting to wsdisplay0
[ 8.454809] wsbell0 at spkr0 mux 1
[ 8.454809] wsbell1 at spkr1 mux 1
[ 8.454809] wsbell2 at spkr2 mux 1
[ 18.374809] Accounting started
Home |
Main Index |
Thread Index |
Old Index