[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Panic at init on arm (Seagate Dockstar) with -current
I posted this on port-arm a few weeks ago and I have someone helping
me look at it, but I figured I would post again.
My Seagate Dockstar has a panic with -current. The last time I built a
good kernel was August 23rd. I noticed a lot of changes since then.
Here is what I see:
cprng sysctl: WARNING insufficient entropy at creation.
boot device: <unknown>
root on sd0a dumps on sd0b
WARNING: clock lost 4652 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
init: copying out path `/sbin/init' 11
fixup: pm 0xc2f1d8a8, va 0xbfffe000, ftype 2 - nothing to do!
fixup: l2 0xc22bcdc8, l2b 0xc22bce80, ptep 0xc22b8bf8, pl1pd 0xc04b2ffc
fixup: pte 0x7790ffe, l1pd 0x7fc0831, last code 0x17
Stopped in pid 1.1 (init) at netbsd:cpu_Debugger+0x4: bx r14
scp=0xc01b72f4 rlv=0xc006371c (netbsd:data_abort_handler+0x384)
r8=0x00000017 r7=0xc8a3e000 r6=0x00000000 r5=0xc2f152c0
scp=0xc00633a8 rlv=0xc005532c (netbsd:address_exception_entry+0x50)
r8=0x00000001 r7=0x00000013 r6=0x0000002f r5=0x00000000
scp=0xc00e5310 rlv=0xc0037254 (netbsd:lwp_trampoline+0x14)
r8=0x00000005 r7=0x00000010 r6=0x00000000 r5=0xc2f152c0
I can run some other commands if needed. I'm not very experienced with
C or debuggers so I might need very basic instructions.
Main Index |
Thread Index |