tech-kern archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: D-link dub e100


> I just bought the network adapter I mentionned. I bought this because it
> was said to be supported by the axe(4) driver : 
> But It doesn't seem to work at all : in ifconfig -a, I don't see it, the
> lights don't light on...
> Is there something I can do ?

I do have a spare D-Link DUB-E100, which I'm not using. I've tried to
plug it to my netbsd box and it seems to be working smoothly. Well, at
least it correctly picked up the IP address via DHCP.

# dmesg
axe0 at uhub3 port 3 configuration 1 interface 0
axe0: D-Link 10/100 ethernet adapter, rev 2.00/10.01, addr 5
axe0: Ethernet address 00:80:c8:xx:yy:zz
ukphy0 at axe0 phy 3: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0009c3, model 0x0005, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

# ifconfig axe0
        address: 00:80:c8:xx:yy:zz
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet netmask 0xffffff00 broadcast
        inet6 fe80::280:c8ff:fe37:6b23%axe0 prefixlen 64 scopeid 0xa

# uname
NetBSD 4.0 (EPIA) #2: Sun Aug 10 00:15:28 CEST 2008


Matteo Beccati

OpenX -

Home | Main Index | Thread Index | Old Index