tech-kern archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

wm problem, the dmesg output



(Geez, I did it again..)

Here's the dmesg output.

  -jm
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_STABLE (ASLAN) #0: Wed Jul 16 18:36:15 EEST 2008
        root@aslan:/ker/compile/ASLAN
total memory = 512 MB
avail memory = 492 MB
timecounter: Timecounters tick every 10.000 msec
BIOS32 rev. 0 found at 0xfd5ad
SMBIOS rev. 2.5 @ 0xcff6a000 (45 entries)
mainbus0 (root)
mainbus0: scanning 0x9cc00 to 0x9cff0 for MP signature
mainbus0: scanning 0x9c800 to 0x9cbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf6200
mainbus0: MP config table at 0x9d1a1, 484 bytes long
cpu0 at mainbus0: apid 0 (boot processor)
cpu1 at mainbus0: apid 1 (application processor)
cpu2 at mainbus0: apid 2 (application processor)
cpu3 at mainbus0: apid 3 (application processor)
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 20, 24 pins
ioapic1 at mainbus0 apid 5 (I/O APIC)
ioapic1: pa 0xfec80000, virtual wire mode, version 20, 24 pins
ioapic0: enabling
ioapic1: enabling
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
hypervisor0 at mainbus0
vcpu0 at hypervisor0: (uniprocessor)
vcpu0: Intel Pentium III (Katmai) (686-class), 2666.76 MHz, id 0x10676
vcpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
vcpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
vcpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
debug virtual interrupt using event channel 1
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
npx0 at hypervisor0: using exception 16
acpi0 at hypervisor0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 2 at level 3
mpacpi: found subordinate bus 3 at level 4
mpacpi: found subordinate bus 4 at level 4
mpacpi: found subordinate bus 5 at level 3
mpacpi: found subordinate bus 6 at level 2
mpacpi: found subordinate bus 7 at level 2
mpacpi: 8 PCI busses
mpacpi: ISA interrupt override  0 -> 2
mpacpi: ISA interrupt override  9 -> 9
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 4 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus 6 int routing
mpacpi: configuring PCI bus 7 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act 
Hi,trig=1=Edge>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act 
Hi,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 8 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 29 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 29 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 29 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 29 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 30 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 30 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 31 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 31 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci1 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci2 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci2 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci3 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci3 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci3 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci3 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci4 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci4 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci5 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 5 attached to pci5 device 2 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci5 device 2 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 5 attached to pci5 device 2 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 0 attached to pci5 device 1 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci5 device 1 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci5 device 1 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci5 device 1 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci5 device 3 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci5 device 3 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci6 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci6 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci6 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci6 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci7 device 1 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci7 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci7 device 2 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci7 device 3 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci7 device 3 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci7 device 3 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci7 device 3 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci7 device 4 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci7 device 4 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci7 device 4 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci7 device 4 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int9 189a0<vector=a0,delmode=1,logical,level,masked,dest=0> 
f000000<target=f>
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
INT0800 [Intel FWH Random Number Generator] at acpi0 not configured
PNP0A05 [Generic Container Device] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
pci0 at hypervisor0 bus 0: configuration mode 1hypervisor0: added to list as 
bus 0

pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x25d4 (rev. 0xb1)
ppb0 at pci0 dev 2 function 0: Intel product 0x25f7 (rev. 0xb1)
pci1 at ppb0 bus 1ppb0: added to list as bus 1

pci1: i/o space, memory space enabled
ppb1 at pci1 dev 0 function 0: Intel 63xxESB PCI Express Upstream Port (rev. 
0x01)
pci2 at ppb1 bus 2ppb1: added to list as bus 2

pci2: i/o space, memory space enabled
ppb2 at pci2 dev 0 function 0: Intel 63xxESB PCI Express Downstream Port #1 
(rev. 0x01)
pci3 at ppb2 bus 3ppb2: added to list as bus 3

pci3: i/o space, memory space enabled
arcmsr0 at pci3 dev 0 function 0ioapic0: int16 
1a9a8<vector=a8,delmode=1,logical,actlo,level,masked,dest=0> f000000<target=f>
: interrupting at ioapic0 pin 16, event channel 3
arcmsr0: Areca ARC-1261 Host Adapter RAID controller
arcmsr0: 16 ports, 2048MB SDRAM, firmware <V1.44 2008-1-31>
scsibus0 at arcmsr0: 16 targets, 8 luns per target
ppb3 at pci2 dev 2 function 0: Intel 63xxESB PCI Express Downstream Port #3 
(rev. 0x01)
pci4 at ppb3 bus 4ppb3: added to list as bus 4

pci4: i/o space, memory space enabled
wm0 at pci4 dev 0 function 0: i80003 dual 1000baseT Ethernet, rev. 1
ioapic0: int18 1a9b0<vector=b0,delmode=1,logical,actlo,level,masked,dest=0> 
f000000<target=f>
wm0: interrupting at ioapic0 pin 18, event channel 4
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:30:48:65:1a:a4
ikphy0 at wm0 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm1 at pci4 dev 0 function 1: i80003 dual 1000baseT Ethernet, rev. 1
ioapic0: int19 1a9b8<vector=b8,delmode=1,logical,actlo,level,masked,dest=0> 
f000000<target=f>
wm1: interrupting at ioapic0 pin 19, event channel 5
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:30:48:65:1a:a5
ikphy1 at wm1 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb4 at pci1 dev 0 function 3: Intel 63xxESB PCI Express to PCI-X Bridge (rev. 
0x01)
pci5 at ppb4 bus 5ppb4: added to list as bus 5

pci5: i/o space, memory space enabled
Intel product 0x1a38 (miscellaneous system, revision 0xb1) at pci0 dev 8 
function 0 not configured
pchb1 at pci0 dev 16 function 0
pchb1: Intel product 0x25f0 (rev. 0xb1)
pchb2 at pci0 dev 16 function 1
pchb2: Intel product 0x25f0 (rev. 0xb1)
pchb3 at pci0 dev 16 function 2
pchb3: Intel product 0x25f0 (rev. 0xb1)
pchb4 at pci0 dev 17 function 0
pchb4: Intel product 0x25f1 (rev. 0xb1)
pchb5 at pci0 dev 19 function 0
pchb5: Intel product 0x25f3 (rev. 0xb1)
pchb6 at pci0 dev 21 function 0
pchb6: Intel product 0x25f5 (rev. 0xb1)
pchb7 at pci0 dev 22 function 0
pchb7: Intel product 0x25f6 (rev. 0xb1)
ppb5 at pci0 dev 28 function 0: Intel 63xxESB PCI Express Port #1 (rev. 0x09)
pci6 at ppb5 bus 6ppb5: added to list as bus 6

pci6: i/o space, memory space enabled
wm2 at pci6 dev 0 function 0: Intel PRO/1000 PT (82571EB), rev. 6
wm2: interrupting at ioapic0 pin 16, event channel 3
wm2: PCI-Express bus
wm2: 65536 word (16 address bits) SPI EEPROM
wm2: Ethernet address 00:15:17:6d:4b:ae
igphy0 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm3 at pci6 dev 0 function 1: Intel PRO/1000 PT (82571EB), rev. 6
ioapic0: int17 1a9c0<vector=c0,delmode=1,logical,actlo,level,masked,dest=0> 
f000000<target=f>
wm3: interrupting at ioapic0 pin 17, event channel 6
wm3: PCI-Express bus
wm3: 65536 word (16 address bits) SPI EEPROM
wm3: Ethernet address 00:15:17:6d:4b:af
igphy1 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 63xxESB USB UHCI Controller (rev. 0x09)
uhci0: interrupting at ioapic0 pin 17, event channel 6
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 63xxESB USB UHCI Controller (rev. 0x09)
uhci1: interrupting at ioapic0 pin 19, event channel 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 63xxESB USB UHCI Controller (rev. 0x09)
uhci2: interrupting at ioapic0 pin 18, event channel 4
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 63xxESB USB UHCI Controller (rev. 0x09)
uhci3: interrupting at ioapic0 pin 16, event channel 3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 63xxESB USB EHCI Controller (rev. 0x09)
ehci0: interrupting at ioapic0 pin 17, event channel 6
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb6 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd9)
pci7 at ppb6 bus 7ppb6: added to list as bus 7

pci7: i/o space, memory space enabled
vga0 at pci7 dev 1 function 0: ATI Technologies product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0
pcib0: Intel 63xxESB LPC Interface Bridge (rev. 0x09)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
ioapic0: int14 9c8<vector=c8,delmode=1,logical,dest=0> f000000<target=f>
piixide0: primary channel interrupting at ioapic0 pin 14, event channel 7
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 631xESB/632xESB Serial ATA Controller (rev. 0x09)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19, event channel 5 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
Intel 63xxESB SMBus Controller (SMBus serial bus, revision 0x09) at pci0 dev 31 
function 3 not configured
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
ioapic0: int3 9d0<vector=d0,delmode=1,logical,dest=0> f000000<target=f>
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
ioapic0: int1 9d8<vector=d8,delmode=1,logical,dest=0> f000000<target=f>
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsprobe: reset error 5
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Xen clock: using event channel 10
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
raidattach: Asked for 8 units
Kernelized RAIDframe activated
xenbus0: using event channel 11
sd0 at scsibus0 target 0 lun 0: <Areca, ASLAN, R001> disk fixed
sd0: 61035 MB, 32552 cyl, 8 head, 480 sec, 512 bytes/sect x 124999680 sectors
sd1 at scsibus0 target 0 lun 1: <Areca, KYYHKY, R001> disk fixed
sd1: 208 GB, 56966 cyl, 16 head, 480 sec, 512 bytes/sect x 437498880 sectors
sd2 at scsibus0 target 0 lun 2: <Areca, XP, R001> disk fixed
sd2: 119 GB, 43402 cyl, 12 head, 480 sec, 512 bytes/sect x 249999360 sectors
atapibus0 at atabus0: 2 targets
sd3 at scsibus0 target 0 lun 3: <Areca, MUIKKU, R001> disk fixed
sd3: 80107 MB, 42724 cyl, 8 head, 480 sec, 512 bytes/sect x 164060160 sectors
sd4 at scsibus0 target 0 lun 4: <Areca, KARHU, R001> disk fixed
sd4: 298 GB, 54253 cyl, 24 head, 480 sec, 512 bytes/sect x 624998400 sectors
sd5 at scsibus0 target 0 lun 5: <Areca, PUB, R001> disk fixed
sd5: 119 GB, 43402 cyl, 12 head, 480 sec, 512 bytes/sect x 249999360 sectors
sd6 at scsibus0 target 0 lun 6: <Areca, MEDIA, R001> disk fixed
sd6: 4705 GB, 81573 cyl, 252 head, 480 sec, 512 bytes/sect x 9867174912 sectors
sd6: mbr partition exceeds disk size
sd6: GPT GUID: c1349a02-e045-11dc-96ed-003048928bca
dk0 at sd6: c1349a16-e045-11dc-96ed-003048928bca
dk0: 9867174845 blocks at 34, type: ffs
sd7 at scsibus0 target 0 lun 7: <Areca, BACKUP, R001> disk fixed
sd7: 931 GB, 59838 cyl, 68 head, 480 sec, 512 bytes/sect x 1953124864 sectors
cd0 at atapibus0 drive 1: <MATSHITADVD-ROM SR-8178, , PZ16> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
uhidev0 at uhub4 port 7 configuration 1 interface 0
uhidev0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/0
ums0 at uhidev0
ums0: X report 0x0022 not supported
uhidev1 at uhub4 port 7 configuration 1 interface 1
uhidev1: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
Searching for RAID components...
boot device: sd0
root on sd0a dumps on sd0b
init: copying out path `/sbin/init' 11
wsdisplay0: screen 4 added (80x25, vt100 emulation)
xvif1.0: Ethernet address 00:0d:10:81:03:01
xbd backend: attach device sd1d (size 437498880) for domain 1
xbd backend: attach device dk0 (size 9867174845) for domain 1
xbd backend 0x1 for domain 1 using event channel 16
xbd backend 0x2 for domain 1 using event channel 17
xbd backend: attach device sd3d (size 164060160) for domain 2
xvif2.0: Ethernet address 00:0d:10:81:03:02
xbd backend: attach device sd4d (size 624998400) for domain 3
xvif3.0: Ethernet address 00:0d:10:81:03:03
xbd backend 0x1 for domain 2 using event channel 23
xbd backend: attach device sd2e (size 249999297) for domain 4
xvif4.0: Ethernet address 00:0d:10:81:03:00
tap0: faking Ethernet device
tap0: Ethernet address f2:0b:a4:2d:e4:05
xbd backend 0x1 for domain 3 using event channel 27


Home | Main Index | Thread Index | Old Index