CVS commit: src/sys/dev/i2c

["Brad Spencer" <brad%netbsd.org@localhost>]

Module Name:    src
Committed By:   brad
Date:           Thu Nov  7 20:06:22 UTC 2024

Modified Files:
        src/sys/dev/i2c: sht3x.c

Log Message:
The SHT3X_READ_SERIAL_NUMBER command on the SHT3x sensors is
undocumented, but used in a lot of other drivers.  When I wrote the
driver it didn't seem like it needed any sort of delay, and that was
true if the I2C bus is short.  However, when the I2C bus is extended
out to a great length using active terminators, or some such, you
won't get any data back from the SHT3X_READ_SERIAL_NUMBER command as
you will try to read from the bus before the data is there.  The SHT3X
device works this way..  you can't start reading back data too soon
after issuing a command to the device.  So, add a delay like the other
commands.  The amount of delay was estimated based upon field
observation.


To generate a diff of this commit:
cvs rdiff -u -r1.7 -r1.8 src/sys/dev/i2c/sht3x.c

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.