CVS commit: [netbsd-9] src/sys/dev/pci

["Martin Husemann" <martin%netbsd.org@localhost>]

Module Name:    src
Committed By:   martin
Date:           Thu May 19 16:24:20 UTC 2022

Modified Files:
        src/sys/dev/pci [netbsd-9]: if_bge.c

Log Message:
Pull up following revision(s) (requested by buhrow in ticket #1456):

        sys/dev/pci/if_bge.c: revision 1.353

For chips which contain an ASF/IPMI firmware, instruct the chip to shut
the host ASF firmware down when attaching the device so the IPMI BMC
can use the same physical port even when NetBSD doesn't have a
network configuration on the device.
By contrast, when the device gets a network configuration assigned to
it and bge_init() is called, the host ASF firmware is brought up so
both NetBSD and the IPMI BMc can use the same physical port.

This now matches FreeBSD behavior, as well as  behavior from NetBSD-5.2.

Tested on a Sunfire X2200-M2 system with the following chip:

bge1 at pci7 dev 4 function 1: Broadcom BCM5715 Gigabit Ethernet
bge1: interrupting at ioapic0 pin 11
bge1: HW config 000000d4, 00000014, 00000000, 00000000 00000000
bge1: ASIC BCM5715 A3 (0x9003), Ethernet address 00:1e:68:XX:XX:XX
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto


To generate a diff of this commit:
cvs rdiff -u -r1.335.2.1 -r1.335.2.2 src/sys/dev/pci/if_bge.c

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.