Re: CVS commit: src/lib/libcurses

[Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>]

> Module Name:  src
> Committed By: blymn
> Date:         Fri Sep 28 06:07:05 UTC 2012
> 
> Modified Files:
>       src/lib/libcurses: addnstr.c
> 
> Log Message:
> Don't wrap added string

Some of these curses changes seem to break sysinst screen.
(reported by nonaka@)

i386 boot-com.iso 201209271920Z:
(from ftp://ftp7.jp.netbsd.org/pub/NetBSD-daily/HEAD/)
---
                                                                                
 This disk matches the following BIOS disk:                                     
                                                                                
 BIOS # cylinders heads sectors total sectors  GB                               
 ------ --------- ----- ------- ------------- ---                               
   0x80       969   128      63       7823360   4                               
                                                                                
 Note: since sysinst was able to uniquely match the disk you chose with a disk  
 known to the BIOS, the values displayed above are very likely correct, and     
 should not be changed (the values for cylinders, heads and sectors are         
 probably 1023, 255 and 63 - this is correct).                                  
 You should only change the geometry if you know the BIOS reports incorrect     
 values.                                                                        
---

i386 boot-com.iso 201209280940Z:
---
                                                                                
 This disk matches the following BIOS disk:                                     
                                                                                
 BIOS # cylinders heads sectors total sectors  GB                               
 ------ --------- ----- ------  0x80       969   128      63       7823360   4  
                                                                                
 Note: since sysinst was able to uniquely match the disk you chose with a disk  
 known to the BIOS, the values displayed above are very likely correct, and     
 should not be changed (the values for cylinders, heads and sectors are         
 probably 1023, 255 and 63 - this is correct).                                  
 You should only change the geometry if you know the BIOS reports incorrect     
 values.                                                                        
---

(though I'm not sure if it's msg.mbr file problem or not)

---
Izumi Tsutsui