Re: Thank you !!! Netra X1 with WD0 and AcerIDE

["Maurizio Caloro" <mauric%gmx.ch@localhost>]

Hello Together
a Great Forum !!!, Thanks for your Help and Support to solv my problem !!!!
Regards Maurizio

>rebooting

Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #51354397.
Ethernet address 0:3:ba:f:9b:1d, Host ID: 830f9b1d.

Executing last command: boot
Boot device: disk  File and args:
NetBSD IEEE 1275 Bootblock
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.13
=0x825660
Loading netbsd: 4338944+153120+426992 [411336+266907]=0x933978
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1_RC4 (NetraX1) #0: Sat Oct 30 10:45:04 CEST 2010
        maurizio@NetraX1.:/usr/src/sys/arch/sparc64/compile/NetraX1
total memory = 1024 MB
avail memory = 991 MB
mainbus0 (root): SUNW,UltraAX-i2 (Sun Netra X1): hostid 830f9b1d
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, UPA id 0
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0
psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: 60000000 to 80000000
IOTSB: 411b2000 to 41232000
pci0 at psycho0
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
dma at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819
power at ebus0 addr 2000-2007 ipl 35 not configured
lom0 at ebus0 addr 8010-8011 ipl 42: SUNW,lomh: LOMlite2 rev 3.10
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43: ns16550a, working fifo
flashprom at ebus0 addr 0-7ffff not configured
alipm0 at pci0 dev 3 function 0: 74KHz clock
iic0 at alipm0: I2C bus
spdmem0 at iic0 addr 0x56
spdmem0: SDRAM memory, data ECC, 512MB, 133MHz (PC-1100)
admtemp0 at iic0 addr 0x18: ADM1021 or compatible environmental sensor
tlp0 at pci0 dev 12 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: interrupting at ivec 3006
tlp0: Ethernet address 00:03:ba:0f:9b:1d
OUI 0x000676 model 0x0004 rev 0 at tlp0 phy 1 not configured
tlp1 at pci0 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp1: interrupting at ivec 301c
tlp1: Ethernet address 00:03:ba:0f:9b:1d
OUI 0x000676 model 0x0004 rev 0 at tlp1 phy 1 not configured
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 
0x03)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
atabus1 at aceride0 channel 1
pcons at mainbus0 not configured
No counter-timer -- using %tick at 500MHz as system clock.
uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
wd0 at atabus0 drive 0: <ST3250823A>
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
Kernelized RAIDframe activated
root on wd0a dumps on wd0b
root file system type: ffs
Sat Oct 30 09:05:42 GMT 2010
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
/dev/rwd0a: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
kern.no_sa_support: 0 -> 1
ddb.onpanic: 1 -> 0
Starting network.
Hostname: NetraX1.
Configuring network interfaces: tlp0ifconfig: SIOCSIFMEDIA: Invalid argument
.
Adding interface aliases:.
Starting dhclient.
Internet Systems Consortium DHCP Client V3.0.3
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

Listening on BPF/tlp0/00:03:ba:0f:9b:1d
Sending on   BPF/tlp0/00:03:ba:0f:9b:1d
Sending on   Socket/fallback
DHCPREQUEST on tlp0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.103 -- renewal in 258849 seconds.
Building databases: dev, utmp, utmpx done
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
Starting sshd.
postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db)
newaliases: warning: inet_protocols: IPv6 support is disabled: Address family 
not supported by protocol family
newaliases: warning: inet_protocols: configuring for IPv4 support only
newaliases: warning: valid_hostname: misplaced delimiter: NetraX1.
newaliases: fatal: unable to use my own hostname
Oct 30 11:05:48 NetraX1 postfix/sendmail[255]: fatal: unable to use my own 
hostname
Starting inetd.
Starting cron.
Sat Oct 30 11:05:48 CEST 2010

NetBSD/sparc64 (NetraX1.) (console)

login:




-------- Original-Nachricht --------
> Datum: Sat, 30 Oct 2010 00:41:05 +0200
> Von: Martin Husemann <martin%duskware.de@localhost>
> An: Maurizio Caloro <mauric%gmx.ch@localhost>
> CC: Takeshi Nakayama <tn%catvmics.ne.jp@localhost>, 
> port-sparc64%NetBSD.org@localhost
> Betreff: Re: Netra X1 with WD0 and AcerIDE

> On Fri, Oct 29, 2010 at 11:55:00PM +0200, Maurizio Caloro wrote:
> > NetBSD 5.1_RC4 (GENERIC32) #0: Wed Oct 27 06:01:54 CEST 2010
> 
> GENERIC32 is not the kernel you want, use GENERIC instead.
> 
> Martin

-- 
-- 
Maurizio Caloro 
Leisibachstrasse 37
6033 Buchrain

+41 41 534 87 14
+41 76 450 33 41 

Email: mauric%gmx.ch@localhost

Sicherer, schneller und einfacher. Die aktuellen Internet-Browser -
jetzt kostenlos herunterladen! http://portal.gmx.net/de/go/chbrowser