Re: radeonfb problem on Mac mini

[Krister Walfridsson <krister.walfridsson%gmail.com@localhost>]

On Sun, 20 Jul 2008, Michael Lorenz wrote:

> Then EDID data aren't the cause of your problem. Is there anything 
> interesting in your dmesg output?

NetBSD 4.99.70 (GENERIC) #0: Mon Jul 21 00:09:21 CEST 2008
        cato@pc5:/usr/local/tmp/nbsd080720/src/sys/arch/macppc/compile/GENERIC
total memory = 512 MB
avail memory = 487 MB
timecounter: Timecounters tick every 10.000 msec
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
bootpath: /pci@f4000000/ethernet:/netbsd
mainbus0 (root)
cpu0 at mainbus0: 7447A (Revision 1.2), ID 0 (primary)
cpu0: HID0 8450c0bc<EMCP,EICE,NAP,DPM,ICE,DCE,SGE,BTIC,FBIOB,ABE,BHT>, 
powersave : 1
cpu0: 1250.00 MHz, 512KB L2 cache no parity parity enabled
uni_n0 at mainbus0 address 0xf8000000
hw-clock at uni_n0 not configured
ki2c0 at uni_n0 address 0xf8001000
iic0 at ki2c0: I2C bus
cereal at ki2c0 address 0x1c0 not configured
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 9200 5962
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 350000
radeonfb0: using static EDID
max_dotclock according to supported modes: 108000
radeonfb0: using static EDID
max_dotclock according to supported modes: 108000
radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000
radeonfb0: display 0: initial virtual resolution 640x350 at 32 bpp
radeonfb0: port 0: physical 640x350 70Hz
radeonfb0: port 1: physical 640x350 70Hz
init engine
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at radeonfb0 not configured
[...]

But I'm not sure how it is supposed to look like, so I cannot say if it is 
interesting... :)

   /Krister